main
Ray Publish 0.1.0 7904bba
{
  "slug": "tmcs1107a2uqdr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "magnetic sensors",
    "tmcs1107a2uqdr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tmcs1107a2uqdr.kicad_sym",
    "tmcs1107a2uqdr.kicad_mod",
    "tmcs1107a2uqdr.glb",
    "tmcs1107a2uqdr.step",
    "tmcs1107a2uqdr.lbr",
    "docs/hero.png",
    "docs/tmcs1107a2uqdr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tmcs1107a2uqdr-hero.glb",
    "tmcs1107a2uqdr-hero.overlay.json",
    "tmcs1107a2uqdr-etched.glb"
  ],
  "component": {
    "mpn": "TMCS1107A2UQDR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Magnetic Sensors",
    "subcategory": "Current Sensors",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tmcs1107.pdf",
    "parts": {
      "symbol": "tmcs1107a2uqdr.kicad_sym",
      "footprint": "tmcs1107a2uqdr.kicad_mod",
      "model_3d": "tmcs1107a2uqdr-hero.glb",
      "model_3d_plain": "tmcs1107a2uqdr-etched.glb",
      "model_3d_step": "tmcs1107a2uqdr-etched.step",
      "model_3d_step_plain": "tmcs1107a2uqdr.step",
      "lbr": "tmcs1107a2uqdr.lbr"
    },
    "distributor_links": {
      "lcsc": "C3684136",
      "digikey": "296-TMCS1107A2UQDRTR-ND",
      "mouser": "595-TMCS1107A2UQDR"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T11:03:48Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TMCS1107A2UQDRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TMCS1107A2UQDR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN+",
        "type": "input",
        "description": "Input current positive pin; current flowing into IN+ is defined as positive, and VIN+ is specified from -420 V to 420 VPK relative to GND."
      },
      {
        "number": "2",
        "name": "IN+",
        "type": "input",
        "description": "Input current positive pin (second IN+ pin, internally connected to pin 1 through the 1.8-mΩ input conductor); VIN+ is specified from -420 V to 420 VPK relative to GND."
      },
      {
        "number": "3",
        "name": "IN–",
        "type": "input",
        "description": "Input current negative pin; VIN- is specified from -420 V to 420 VPK relative to GND, and the input conductor is rated for 30 A RMS continuous at 25°C, derated to 16 A at 125°C."
      },
      {
        "number": "4",
        "name": "IN–",
        "type": "input",
        "description": "Input current negative pin (second IN- pin, internally connected to pin 3 through the input conductor); VIN- is specified from -420 V to 420 VPK relative to GND."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground and reference for VS, VOUT, NC and the input voltage ratings; absolute maximum VS is GND - 0.3 V to 6 V."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; the pin can tolerate a capacitive or resistive connection to GND or VS (short to GND recommended if acceptable), with an input impedance of 1 MΩ and an absolute voltage range of GND - 0.3 V to VS + 0.3 V."
      },
      {
        "number": "7",
        "name": "VOUT",
        "type": "output",
        "description": "Analog output voltage proportional to input current; swings to within 0.1 V of VS and 10 mV of GND at 10 kΩ load, with a maximum capacitive load of 1 nF."
      },
      {
        "number": "8",
        "name": "VS",
        "type": "power_in",
        "description": "Analog supply; the TMCS1107A2U operates from 3 V to 5.5 V (absolute maximum 6 V), with 0.1-µF low-ESR decoupling recommended between VS and GND."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 6 is labeled NC (No Connect) in the Pin Configuration table and Pin Functions table (page 3), bu; The datasheet pin table lists IN+ and IN– as Analog input, which was mapped to the KiCad class 'inpu"
        ],
        "pages_sent": 40,
        "cost_usd": 0.1756,
        "at": "2026-11-11T11:03:35"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tmcs1107.pdf",
        "pages": 40,
        "sha256": "d6b410437cae17af",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tmcs1107a2uqdr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tmcs1107a2uqdr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8e3717a79c67bc3b291a3072c6a62e781d41e73ed5354e843aaf10def43869c3",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}