main
Ray Publish 0.1.0 7904bba

TMCS1107A2UQDR

Texas Instruments · Current Sensors · SOIC-8

TMCS1107A2UQDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Input current positive pin; current flowing into IN+ is defined as positive, and VIN+ is specified from -420 V to 420 VPK relative to GND.
2 IN+ input Input current positive pin (second IN+ pin, internally connected to pin 1 through the 1.8-mΩ input conductor); VIN+ is specified from -420 V to 420 VPK relative to GND.
3 IN- input Input current negative pin; VIN- is specified from -420 V to 420 VPK relative to GND, and the input conductor is rated for 30 A RMS continuous at 25°C, derated to 16 A at 125°C.
4 IN- input Input current negative pin (second IN- pin, internally connected to pin 3 through the input conductor); VIN- is specified from -420 V to 420 VPK relative to GND.
5 GND power_in Analog ground and reference for VS, VOUT, NC and the input voltage ratings; absolute maximum VS is GND - 0.3 V to 6 V.
6 NC unconnected No connect; the pin can tolerate a capacitive or resistive connection to GND or VS (short to GND recommended if acceptable), with an input impedance of 1 MΩ and an absolute voltage range of GND - 0.3 V to VS + 0.3 V.
7 VOUT output Analog output voltage proportional to input current; swings to within 0.1 V of VS and 10 mV of GND at 10 kΩ load, with a maximum capacitive load of 1 nF.
8 VS power_in Analog supply; the TMCS1107A2U operates from 3 V to 5.5 V (absolute maximum 6 V), with 0.1-µF low-ESR decoupling recommended between VS and GND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Magnetic Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, operating (TMCS1107A1B/U-A3B/U) VS 3 5 5.5 V TMCS1107A1B/U-A3B/U 4
Operating free-air temperature TA -40 125 °C 4
Input voltage (VIN+, VIN- relative to GND) VIN+,VIN- -420 420 VPK 4
Supply voltage (absolute maximum) VS 6 V 4
Junction temperature TJ -65 150 °C 4
Storage temperature Tstg -65 150 °C 4
Sensitivity error -1.2 0.4 1.2 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC 8
Sensitivity error, including lifetime and environmental drift -1.8 0.7 1.8 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC 8
Sensitivity error -1.8 0.7 1.8 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +85ºC 8
Sensitivity error -2.25 0.9 2.25 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +125ºC 8
Nonlinearity error -0.5 0.5 % VOUT = 0.5 V to VS, 0.5 V 8
Output voltage offset error VOE -10 2 10 mV 8
Output voltage offset drift -40 10 40 µV/℃ TA= -40ºC to +125ºC 8
Offset error, RTI IOS -100 20 100 mA 9
Offset error temperature drift, RTI -400 100 400 µA/°C TA= -40ºC to +125ºC 9
Power-supply rejection ratio PSRR -6.5 1 6.5 mV/V VS = 3 V to 5.5 V, TA= -40ºC to +125ºC 9
Quiescent current IQ 4.5 5.5 mA TA = 25ºC 10
Quiescent current IQ 6 mA TA = -40ºC to +125ºC 10
Common mode transient immunity 50 kV/µs 9
Common mode rejection ratio, RTI CMRR 5 uA/V DC to 60Hz 9
Noise density, RTI (TMCS1107A2U) 330 μA/√Hz 9
Input conductor resistance RIN 1.8 mΩ IN+ to IN- 9
Input conductor resistance temperature drift 4.4 μΩ/°C TA= -40ºC to +125ºC 9
Magnetic coupling factor G 1.1 mT/A TA= 25ºC 9
Allowable continuous RMS current IIN,max 30 A TA= 25ºC 9
Allowable continuous RMS current IIN,max 25 A TA= 85ºC 9
Allowable continuous RMS current IIN,max 22.5 A TA= 105ºC 9
Allowable continuous RMS current IIN,max 16 A TA= 125ºC 9
NC (pin 6) input impedance 1 MΩ Over allowable range, GND < VNC < VS 9
Closed loop output impedance ZOUT 0.2 Ω f = 1 Hz to 1 kHz 9
Closed loop output impedance ZOUT 2 Ω f = 10 kHz 9
Maximum capacitive load 1 nF No sustained oscillation 9
Short circuit output current 90 mA VOUT short to ground, short to VS 9
Bandwidth, -3-dB BW 80 kHz -3-dB Bandwidth 10
Slew rate SR 1.5 V/µs Slew rate of output amplifier during single transient step 10
Response time tr 6.5 µs Input current step 90% to sensor output 90%, for a 1 V output transition 10
Propagation delay tp 4 µs Input current step 10% to sensor output 10%, for a 1 V output transition 10
Current overload response time tr,SC 5 µs Input current step amplitude is twice full scale output range 10
Current overload propagation delay tp,SC 3 µs Input current step amplitude is twice full scale output range 10
Current overload recovery time 15 µs Time from end of current causing output saturation condition to valid output 10
Power on time 25 ms Time from VS > 3 V to valid output 10
Junction-to-ambient thermal resistance RθJA 36.6 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 50.7 °C/W 5
Junction-to-board thermal resistance RθJB 9.6 °C/W 5
Junction-to-top characterization parameter ΨJT -0.1 °C/W 5
Junction-to-board characterization parameter ΨJB 11.7 °C/W 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper directly underneath the package lead footprint, and use a merged copper input trace for both the IN+ and IN- 32

CAD (KiCad official)

  • Symbol: TMCS1107A2UQDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tmcs1107a2uqdr-etched.step / tmcs1107a2uqdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmcs1107a2uqdr.step / tmcs1107a2uqdr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 d6b410437cae17af, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF