main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tmcs1100a4qdrq1: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tmcs1100a4qdrq1-etched.glb Publish 0.1.0 · Ray
tmcs1100a4qdrq1-etched.step tmcs1100a4qdrq1: factory component page (tier=mfr) · Ray
tmcs1100a4qdrq1-hero.glb tmcs1100a4qdrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
tmcs1100a4qdrq1-hero.overlay.json Publish 0.1.0 · Ray
tmcs1100a4qdrq1.glb Publish 0.1.0 · Ray
tmcs1100a4qdrq1.kicad_mod Publish 0.1.0 · Ray
tmcs1100a4qdrq1.kicad_sym Publish 0.1.0 · Ray
tmcs1100a4qdrq1.lbr Publish 0.1.0 · Ray
tmcs1100a4qdrq1.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

TMCS1100A4QDRQ1

Texas Instruments · Current Sensors · SOIC-8

TMCS1100A4QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Input current positive pin; the current is defined as positive when flowing into the positive input pin, and IN+ and IN- are isolated from pins 5-8.
2 IN+ input Input current positive pin; this pin is the same net as pin 1 and carries the same input current path.
3 IN- input Input current negative pin; this pin is the return side of the isolated input current path and is the same net as pin 4.
4 IN- input Input current negative pin; this pin is the same net as pin 3 and carries the same input current path.
5 GND power_in Analog ground and reference for the low-voltage side; input voltages VIN+ and VIN- are specified relative to this pin.
6 VREF power_in Zero-current output voltage reference input; the VREF input range is GND to VS, and VREF sets VOUT at zero input current.
7 VOUT output Analog output voltage proportional to the input current, with a swing limited to approximately GND to VS.
8 VS power_in Analog power supply for the low-voltage isolated side; for the TMCS1100A4-Q1 the operating supply is 4.5 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Magnetic Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VS 6 V 4
Junction temperature TJ -65 150 °C 4
Storage temperature Tstg -65 150 °C 4
Input voltage VIN+, VIN- -600 600 VPK Relative to pin 5 (GND) 4
Operating supply voltage, TMCS1100A4-Q1 VS 4.5 5 5.5 V TMCS1100A4-Q1 4
Operating free-air temperature TA -40 125 °C 4
Sensitivity error -0.7 0.2 0.7 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC 8
Sensitivity error, including lifetime and environmental drift -1.02 -0.47 1.02 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC 8
Sensitivity error -0.85 0.4 0.85 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +85ºC 8
Sensitivity error -1.15 0.5 1.15 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +125ºC 8
Nonlinearity error -0.05 0.05 % VOUT = 0.5 V to VS, 0.5 V 8
Output voltage offset error, TMCS1100A4-Q1 VOE -19 2.2 19 mV 8
Output voltage offset drift, TMCS1100A4-Q1 -138 26 138 µV/℃ TA= -40ºC to +125ºC 8
Offset error, RTI, TMCS1100A4-Q1 IOS -47.5 5.5 47.5 mA 8
Offset error temperature drift, RTI, TMCS1100A4-Q1 -345 65 345 µA/°C TA= -40ºC to +125ºC 8
Power-supply rejection ratio, TMCS1100A4-Q1 PSRR -3 1 3 mV/V VS = 4.5 V to 5.5 V, VREF = VS/2, TA= -40ºC to +125ºC 8
Reference voltage rejection ratio, output referred, TMCS1100A4-Q1 RVRR 1.5 8 mV/V VREF = 0.5 V to 4.5 V 8
VREF input current -5 1 5 µA VREF = GND, VS 9
VREF external source impedance 5 kΩ Maximum source impedance of external circuit driving VREF 9
Maximum capacitive load 1 nF No sustained oscillation 9
Swing to GND, current driven (offset above GND) VGND + 5 10 mV RL = 10 kΩ to GND, TA= -40ºC to +125ºC 9
Swing to GND, zero current, TMCS1100A4-Q1 (offset above GND) VGND + 20 55 mV TMCS1100A4-Q1, RL = 10 kΩ to GND, TA= -40ºC to +125ºC, VREF = GND, IIN = 0 A 9
Swing to VS power-supply rail (offset below VS) VS, 0.02 0.1 V RL = 10 kΩ to GND, TA= -40ºC to +125ºC 9
Allowable continuous RMS current IIN,max 30 A TA= 25ºC 8
Allowable continuous RMS current IIN,max 25 A TA= 85ºC 8
Allowable continuous RMS current IIN,max 22.5 A TA= 105ºC 8
Allowable continuous RMS current IIN,max 16 A TA= 125ºC 8
Quiescent current IQ 4.5 5.5 mA TA = 25ºC 9
Quiescent current IQ 6 mA TA = -40ºC to +125ºC 9
Sensitivity, TMCS1100A4-Q1 400 mV/A 8
Common mode transient immunity CMTI 50 kV/µs 8
Common mode rejection ratio, RTI CMRR 5 uA/V DC to 60Hz 8
Noise density, RTI, TMCS1100A4-Q1 225 μA/√Hz 8
Input conductor resistance RIN 1.8 mΩ IN+ to IN- 8
Input conductor resistance temperature drift 4.4 μΩ/°C TA= -40ºC to +125ºC 8
Magnetic coupling factor G 1.1 mT/A TA= 25ºC 8
Closed loop output impedance ZOUT 0.2 Ω f = 1 Hz to 1 kHz 9
Closed loop output impedance ZOUT 2 Ω f = 10 kHz 9
Short circuit output current 90 mA VOUT short to ground, short to VS 9
Bandwidth, -3-dB BW 80 kHz 9
Slew rate SR 1.5 V/µs Slew rate of output amplifier during single transient step 9
Response time tr 6.5 µs For a 1V output transition 9
Propagation delay tp 4 µs For a 1V output transition 9
Current overload response time tr,SC 5 µs Input current step amplitude is twice full scale output range 9
Current overload propagation delay tp,SC 3 µs Input current step amplitude is twice full scale output range 9
Current overload recovery time 15 µs Time from end of current causing output saturation condition to valid output 9
Power on time 25 ms Time from VS > 3 V to valid output 9
Junction-to-ambient thermal resistance RθJA 36.6 °C/W Applies when device mounted on TMCS1100EVM 4
Junction-to-case (top) thermal resistance RθJC(top) 50.7 °C/W 4
Junction-to-board thermal resistance RθJB 9.6 °C/W 4
Junction-to-top characterization parameter ΨJT -0.1 °C/W 4
Junction-to-board characterization parameter ΨJB 11.7 °C/W 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper path directly underneath the package lead footprint, and use a merged copper input trace for both the IN+ and 39

CAD (KiCad official)

  • Symbol: TMCS1100A4QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tmcs1100a4qdrq1-etched.step / tmcs1100a4qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmcs1100a4qdrq1.step / tmcs1100a4qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 3a8410cfe50bd5d2, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF