Generated by kicad-footprint-generator · KiCad file format 20260206
TMCS1100A3QDRQ1
Texas Instruments · Current Sensors · SOIC-8
TMCS1100A3QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | passive | Input current positive pin, one of two paralleled pins carrying the primary current through the internal 1.8 mΩ conductor, rated ±600 VPK relative to GND. |
| 2 | IN+ | passive | Input current positive pin, one of two paralleled pins carrying the primary current through the internal 1.8 mΩ conductor, rated ±600 VPK relative to GND. |
| 3 | IN- | passive | Input current negative pin, one of two paralleled pins carrying the primary current out of the internal 1.8 mΩ conductor, rated ±600 VPK relative to GND. |
| 4 | IN- | passive | Input current negative pin, one of two paralleled pins carrying the primary current out of the internal 1.8 mΩ conductor, rated ±600 VPK relative to GND. |
| 5 | GND | power_in | Ground reference for the supply and the signal side; the IN+ and IN- voltages are specified relative to this pin. |
| 6 | VREF | power_in | Analog input setting the zero-current output voltage reference, allowing bidirectional or unidirectional sensing, with an absolute maximum of GND - 0.3 V to VS + 0.3 V. |
| 7 | VOUT | output | Analog output voltage proportional to input current (200 mV/A for the A3 variant), with an absolute maximum of GND - 0.3 V to VS + 0.3 V. |
| 8 | VS | power_in | Power supply input, operating range 3 V to 5.5 V for the A3 variant, with an absolute maximum of 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Sensitivity (A3) | ΔVOUT/ΔIIN | 200 | mV/A | TMCS1100A3-Q1 | 7 | ||
| Sensitivity error | -0.7 | 0.2 | 0.7 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC | 7 | |
| Sensitivity error, including lifetime and environmental drift | -1.02 | -0.47 | 1.02 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC | 7 | |
| Sensitivity error, -40 to 85C | -0.85 | 0.4 | 0.85 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +85ºC | 7 | |
| Sensitivity error, -40 to 125C | -1.15 | 0.5 | 1.15 | % | 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +125ºC | 7 | |
| Nonlinearity error | 0.05 | % | VOUT = 0.5 V to VS, 0.5 V | 7 | |||
| Output voltage offset error | VOE | -8 | 0.8 | 8 | mV | TMCS1100A3-Q1 | 7 |
| Output voltage offset drift | -35 | 8.2 | 35 | µV/℃ | TMCS1100A3-Q1, TA= -40ºC to +125ºC | 7 | |
| Offset error, RTI | IOS | -40 | 4 | 40 | mA | TMCS1100A3-Q1 | 7 |
| Offset error temperature drift, RTI | -175 | 41 | 175 | µA/°C | TMCS1100A3-Q1, TA= -40ºC to +125ºC | 7 | |
| Power-supply rejection ratio | PSRR | -2 | 1 | 2 | mV/V | TMCS1100A1-Q1-A3-Q1, VS = 3 V to 5.5 V, VREF = VS/2, TA= -40ºC to +125ºC | 7 |
| Common mode transient immunity | CMTI | 50 | kV/µs | 7 | |||
| Common mode rejection ratio, RTI | CMRR | 5 | uA/V | DC to 60Hz | 7 | ||
| Reference voltage rejection ratio, output referred | RVRR | 1 | 3.5 | mV/V | VREF = 0.5 V to 4.5 V, TMCS1100A1-Q1-A3-Q1 | 7 | |
| Noise density, RTI | 300 | μA/√Hz | TMCS1100A3-Q1 | 7 | |||
| Input conductor resistance | RIN | 1.8 | mΩ | IN+ to IN- | 7 | ||
| Input conductor resistance temperature drift | 4.4 | μΩ/°C | TA= -40ºC to +125ºC | 8 | |||
| Magnetic coupling factor | G | 1.1 | mT/A | TA= 25ºC | 8 | ||
| Allowable continuous RMS current, 25C | IIN,max | 30 | A | TA= 25ºC | 8 | ||
| Allowable continuous RMS current, 85C | IIN,max | 25 | A | TA= 85ºC | 8 | ||
| Allowable continuous RMS current, 105C | IIN,max | 22.5 | A | TA= 105ºC | 8 | ||
| Allowable continuous RMS current, 125C | IIN,max | 16 | A | TA= 125ºC | 8 | ||
| VREF input current | -5 | 1 | 5 | µA | VREF = GND, VS | 8 | |
| VREF external source impedance | 5 | kΩ | Maximum source impedance of external circuit driving VREF | 8 | |||
| Closed loop output impedance, low freq | ZOUT | 0.2 | Ω | f = 1 Hz to 1 kHz | 8 | ||
| Closed loop output impedance, 10 kHz | ZOUT | 2 | Ω | f = 10 kHz | 8 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 8 | |||
| Short circuit output current | 90 | mA | VOUT short to ground, short to VS | 8 | |||
| Swing to GND, current driven (above VGND) | 5 | 10 | mV | RL = 10 kΩ to GND, TA= -40ºC to +125ºC | 8 | ||
| Swing to GND, zero current (above VGND) | 5 | 20 | mV | TMCS1100A1-Q1-A3-Q1, RL = 10 kΩ to GND, TA= -40ºC to +125ºC, VREF = GND, IIN = 0 A | 8 | ||
| Bandwidth | BW | 80 | kHz | -3-dB Bandwidth | 8 | ||
| Slew rate | SR | 1.5 | V/µs | Slew rate of output amplifier during single transient step. | 8 | ||
| Response time | tr | 6.5 | µs | Input current step reaching 90% of final value to output reaching 90%, for a 1V output transition. | 8 | ||
| Propagation delay | tp | 4 | µs | Input current step reaching 10% of final value to output reaching 10%, for a 1V output transition. | 8 | ||
| Current overload response time | tr,SC | 5 | µs | Input current step amplitude is twice full scale output range. | 8 | ||
| Current overload propagation delay | tp,SC | 3 | µs | Input current step amplitude is twice full scale output range. | 8 | ||
| Current overload recovery time | 15 | µs | Time from end of current causing output saturation condition to valid output | 8 | |||
| Quiescent current, 25C | IQ | 4.5 | 5.5 | mA | TA = 25ºC | 9 | |
| Quiescent current, full temperature | IQ | 6 | mA | TA = -40ºC to +125ºC | 9 | ||
| Power on time | 25 | ms | Time from VS > 3 V to valid output | 9 | |||
| Supply voltage (abs max) | VS | -0.3 | 6 | V | min printed as GND, 0.3 | 4 | |
| Junction temperature (abs max) | TJ | -65 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -1000 | 1000 | V | Charged-device model, JEDEC JESD22-C101 | 4 | |
| Input voltage VIN+, VIN- | VIN+,VIN- | -600 | 600 | VPK | relative to pin 5 (GND) | 4 | |
| Operating supply voltage | VS | 3 | 5 | 5.5 | V | TMCS1100A1-Q1-A3-Q1 | 4 |
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 36.6 | °C/W | D (SOIC) 8 pins, on TMCS1100EVM | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 50.7 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 9.6 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ΨJT | -0.1 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ΨJB | 11.7 | °C/W | 4 | |||
| Maximum power dissipation (both sides) | PD | 673 | mW | VS = 5.5 V, VREF = GND, TA = 125℃, TJ = 150℃ | 5 | ||
| Withstand isolation voltage | VISO | 3000 | VRMS | VTEST = VISO, t = 60 s (qualification) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | path directly underneath the package lead footprint, and use a merged copper input trace for both the IN+ and | 38 |
CAD (KiCad official)
- Symbol:
TMCS1100A3QDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tmcs1100a3qdrq1-etched.step/tmcs1100a3qdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmcs1100a3qdrq1.step/tmcs1100a3qdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
e66019599a6cc228, retrieved 2026-10-23, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).