Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TMCS1100A2QDRQ1

Texas Instruments · Current Sensors · SOIC-8

TMCS1100A2QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Input current positive pin; input current flows through the internal 1.8 mΩ conductor between IN+ and IN-, which the Hall sensor measures.
2 IN+ input Input current positive pin; input current flows through the internal 1.8 mΩ conductor between IN+ and IN-, which the Hall sensor measures.
3 IN- input Input current negative pin; input current returns through the internal 1.8 mΩ conductor, and the input voltage is rated -600 V to 600 V relative to GND (pin 5).
4 IN- input Input current negative pin; input current returns through the internal 1.8 mΩ conductor, and the input voltage is rated -600 V to 600 V relative to GND (pin 5).
5 GND power_in Analog ground, the reference for the input voltage ratings and the VREF and VOUT signal levels.
6 VREF power_in Zero current output voltage reference that sets the VOUT level at zero input current, allowing bidirectional or unidirectional sensing.
7 VOUT output Output voltage that is proportional to the input current, with a sensitivity of 100 mV/A for the A2 variant.
8 VS power_in Analog power supply; the operating supply voltage for the TMCS1100A2 variant is 3 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS -0.3 6 V min printed as GND, 0.3 4
Analog input VREF VREF -0.3 V min printed as GND, 0.3; max printed as (VS) + 0.3 4
Analog output VOUT VOUT -0.3 V min printed as GND, 0.3; max printed as (VS) + 0.3 4
Junction temperature TJ -65 150 °C 4
Storage temperature Tstg -65 150 °C 4
Input voltage VIN+,VIN- -600 600 VPK relative to pin 5 (GND) 4
Operating supply voltage VS 3 5 5.5 V TMCS1100A1-Q1-A3-Q1 4
Operating free-air temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 36.6 °C/W device mounted on TMCS1100EVM 4
Junction-to-case (top) thermal resistance RθJC(top) 50.7 °C/W 4
Junction-to-board thermal resistance RθJB 9.6 °C/W 4
Junction-to-top characterization parameter ΨJT -0.1 °C/W 4
Junction-to-board characterization parameter ΨJB 11.7 °C/W 4
Sensitivity error -0.7 0.2 0.7 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC 7
Sensitivity error, including lifetime and environmental drift -1.02 -0.47 1.02 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC 7
Sensitivity error -0.85 0.4 0.85 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +85ºC 7
Sensitivity error -1.15 0.5 1.15 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +125ºC 7
Nonlinearity error -0.05 0.05 % VOUT = 0.5 V to VS, 0.5 V 7
Output voltage offset error VOE -5 0.6 5 mV 7
Output voltage offset drift -19 4 19 µV/℃ TMCS1100A2-Q1, TA= -40ºC to +125ºC 7
Offset error, RTI IOS -50 6 50 mA TMCS1100A2-Q1 7
Offset error temperature drift, RTI -190 40 190 µA/°C TMCS1100A2-Q1, TA= -40ºC to +125ºC 7
Power-supply rejection ratio PSRR -2 1 2 mV/V TMCS1100A1-Q1-A3-Q1, VS = 3 V to 5.5 V, VREF = VS/2, TA= -40ºC to +125ºC 7
Reference voltage rejection ratio, output referred RVRR 1 3.5 mV/V VREF = 0.5 V to 4.5 V, TMCS1100A1-Q1-A3-Q1 7
Input conductor resistance RIN 1.8 mΩ IN+ to IN- 7
Input conductor resistance temperature drift 4.4 μΩ/°C TA= -40ºC to +125ºC 8
VREF input current -5 1 5 µA VREF = GND, VS 8
VREF external source impedance 5 kΩ Maximum source impedance of external circuit driving VREF 8
Quiescent current IQ 4.5 5.5 mA TA = 25ºC 9
Quiescent current IQ 6 mA TA = -40ºC to +125ºC 9

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper path directly underneath the package lead footprint, and use a merged copper input trace for both the IN+ and 38

CAD (KiCad official)

  • Symbol: TMCS1100A2QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tmcs1100a2qdrq1-etched.step / tmcs1100a2qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmcs1100a2qdrq1.step / tmcs1100a2qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 e66019599a6cc228, retrieved 2026-11-02, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF