main
Ray Publish 0.1.0 b069baf

TMCS1100A1QDRQ1

Texas Instruments · Current Sensors · SOIC-8

TMCS1100A1QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Input current positive pin; current flowing into this pin is treated as positive polarity.
2 IN+ input Input current positive pin; current flowing into this pin is treated as positive polarity.
3 IN- input Input current negative pin, which carries the return path of the sensed current.
4 IN- input Input current negative pin, which carries the return path of the sensed current.
5 GND power_in Analog ground; input voltages VIN+ and VIN- are specified relative to this pin.
6 VREF power_in Zero current output voltage reference that sets the zero-current output level and allows bidirectional or unidirectional sensing; VREF must be within GND - 0.3 V to VS + 0.3 V.
7 VOUT output Output voltage that is proportional to the input current; VOUT must be within GND - 0.3 V to VS + 0.3 V.
8 VS power_in Analog power supply; operating supply voltage is 3 V to 5.5 V for TMCS1100A1-Q1 to A3-Q1 and 4.5 V to 5.5 V for TMCS1100A4-Q1.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Magnetic Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Sensitivity error, incl. lifetime and environmental drift -1.02 -0.47 1.02 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC 7
Sensitivity error -0.7 0.2 0.7 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= 25ºC 7
Sensitivity error -0.85 0.4 0.85 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +85ºC 7
Sensitivity error -1.15 0.5 1.15 % 0.05 V ≤ VOUT ≤ VS, 0.2 V, TA= -40ºC to +125ºC 7
Output voltage offset error (TMCS1100A1-Q1) VOE -3 0.4 3 mV 7
Output voltage offset drift (TMCS1100A1-Q1) -12 3.7 12 µV/℃ TA= -40ºC to +125ºC 7
Offset error, RTI (TMCS1100A1-Q1) IOS -60 8 60 mA 7
Offset error temperature drift, RTI (TMCS1100A1-Q1) -240 74 240 µA/°C TA= -40ºC to +125ºC 7
Power-supply rejection ratio (TMCS1100A1-Q1-A3-Q1) PSRR -2 1 2 mV/V VS = 3 V to 5.5 V, VREF = VS/2, TA= -40ºC to +125ºC 7
Reference voltage rejection ratio, output referred (TMCS1100A1-Q1-A3-Q1) RVRR 1 3.5 mV/V VREF = 0.5 V to 4.5 V 7
Nonlinearity error -0.05 0.05 % VOUT = 0.5 V to VS, 0.5 V 7
VREF input current -5 1 5 µA VREF = GND, VS 8
VREF external source impedance 5 kΩ Maximum source impedance of external circuit driving VREF 8
Operating supply voltage, TMCS1100A1-Q1-A3-Q1 VS 3 5 5.5 V 4
Input voltage, VIN+ and VIN- (relative to GND) VIN+,VIN- -600 600 VPK 4
Operating free-air temperature TA -40 125 °C 4
Supply voltage VS -0.3 6 V 4
Junction temperature TJ -65 150 °C 4
Storage temperature Tstg -65 150 °C 4
Quiescent current IQ 4.5 5.5 mA TA = 25ºC 9
Quiescent current IQ 6 mA TA = -40ºC to +125ºC 9
Maximum power dissipation (both sides) PD 673 mW 5
Maximum power dissipation (current input, side-1) PD1 640 mW IIN = 16 A 5
Maximum power dissipation (side-2) PD2 33 mW VS = 5.5 V, IQ = 6mA, no VOUT load 5
Sensitivity (TMCS1100A1-Q1) 50 mV/A 7
Input conductor resistance IN+ to IN- RIN 1.8 mΩ IN+ to IN- 7
Input conductor resistance temperature drift 4.4 μΩ/°C TA= -40ºC to +125ºC 8
Noise density, RTI (TMCS1100A1-Q1) 380 μA/√Hz 7
Magnetic coupling factor G 1.1 mT/A TA= 25ºC 8
Common mode rejection ratio, RTI CMRR 5 uA/V DC to 60Hz 7
Common mode transient immunity CMTI 50 kV/µs 7
Allowable continuous RMS current IIN,max 30 A TA= 25ºC 8
Allowable continuous RMS current IIN,max 25 A TA= 85ºC 8
Allowable continuous RMS current IIN,max 22.5 A TA= 105ºC 8
Allowable continuous RMS current IIN,max 16 A TA= 125ºC 8
Swing to GND, current driven 5 10 mV RL = 10 kΩ to GND, TA= -40ºC to +125ºC 8
Swing to GND, zero current (TMCS1100A1-Q1-A3-Q1) 5 20 mV RL = 10 kΩ to GND, TA= -40ºC to +125ºC, VREF = GND, IIN = 0 A 8
Short circuit output current 90 mA VOUT short to ground, short to VS 8
Maximum capacitive load 1 nF No sustained oscillation 8
Closed loop output impedance ZOUT 0.2 Ω f = 1 Hz to 1 kHz 8
Closed loop output impedance ZOUT 2 Ω f = 10 kHz 8
Bandwidth BW 80 kHz -3-dB Bandwidth 8
Slew rate SR 1.5 V/µs Slew rate of output amplifier during single transient step 8
Response time tr 6.5 µs for a 1V output transition 8
Propagation delay tp 4 µs for a 1V output transition 8
Current overload response time tr,SC 5 µs Input current step amplitude is twice full scale output range 8
Current overload propagation delay tp,SC 3 µs Input current step amplitude is twice full scale output range 8
Current overload recovery time 15 µs Time from end of current causing output saturation condition to valid output 8
Power on time 25 ms Time from VS > 3 V to valid output 9
Junction-to-ambient thermal resistance RθJA 36.6 °C/W Applies when device mounted on TMCS1100EVM 4
Junction-to-case (top) thermal resistance RθJC(top) 50.7 °C/W 4
Junction-to-board thermal resistance RθJB 9.6 °C/W 4
Junction-to-top characterization parameter ΨJT -0.1 °C/W 4
Junction-to-board characterization parameter ΨJB 11.7 °C/W 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper path directly underneath the package lead footprint, and use a merged copper input trace for both the IN+ and 38

CAD (KiCad official)

  • Symbol: TMCS1100A1QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tmcs1100a1qdrq1-etched.step / tmcs1100a1qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmcs1100a1qdrq1.step / tmcs1100a1qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 e66019599a6cc228, retrieved 2026-10-29, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF