component
TMC2208-LA-T
Public Made by Adomby adom
TRINAMIC Motion Control GmbH Stepper Motor Driver, QFN-28-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
tmc2208-la-t: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
e19a6a2
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302
{
"slug": "tmc2208-la-t",
"version": "0.1.0",
"type": "component",
"description": "TRINAMIC Motion Control GmbH Stepper Motor Driver, QFN-28-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"motor driver ics",
"tmc2208-la-t",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tmc2208-la-t.kicad_sym",
"tmc2208-la-t.kicad_mod",
"tmc2208-la-t.glb",
"tmc2208-la-t.step",
"tmc2208-la-t.lbr",
"docs/hero.png",
"docs/tmc2208-la-t-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "TMC2208-LA-T",
"manufacturer": "TRINAMIC Motion Control GmbH",
"package": "QFN-28-EP(5x5)",
"pin_count": 29,
"category": "Motor Driver ICs",
"subcategory": "Stepper Motor Driver",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182891412209664",
"parts": {
"symbol": "tmc2208-la-t.kicad_sym",
"footprint": "tmc2208-la-t.kicad_mod",
"model_3d": "tmc2208-la-t.glb",
"model_3d_step": "tmc2208-la-t.step",
"lbr": "tmc2208-la-t.lbr"
},
"distributor_links": {
"lcsc": "C115944"
},
"pins": [
{
"number": "1",
"name": "OB2",
"type": "output",
"description": "Motor coil B output 2; open drain output stage that directly drives motor phase B terminal."
},
{
"number": "2",
"name": "ENN",
"type": "input",
"description": "Enable not input; high level disables all motor driver bridges setting outputs to high impedance floating state."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground reference; connect to GND plane with short path near pin."
},
{
"number": "4",
"name": "CPO",
"type": "output",
"description": "Charge pump capacitor output; tie to CPI via 22nF 50V capacitor for charge pump stabilization."
},
{
"number": "5",
"name": "CPI",
"type": "input",
"description": "Charge pump capacitor input; capacitively coupled from CPO via 22nF capacitor for charge pump feedback integration."
},
{
"number": "6",
"name": "VCP",
"type": "output",
"description": "Charge pump voltage output; filter with 100nF capacitor tied to VS for high-side driver supply."
},
{
"number": "7",
"name": "N.C.",
"type": "unconnected",
"description": "Unused pin; leave open or connect to GND for compatibility to future device versions."
},
{
"number": "8",
"name": "5VOUT",
"type": "power_out",
"description": "5V regulator output; attach 2.2-4.7µF ceramic capacitor directly to GND near pin for filtering."
},
{
"number": "9",
"name": "MS1",
"type": "input",
"description": "Microstep resolution selection input with internal pull-down resistor; combined with MS2 pin for resolution setting."
},
{
"number": "10",
"name": "MS2",
"type": "input",
"description": "Microstep resolution selection input with internal pull-down resistor; MS2:MS1 = 00 selects 1/8, 01 selects 1/2, 10 selects 1/4, 11 selects 1/16 microsteps."
},
{
"number": "11",
"name": "DIAG",
"type": "output",
"description": "Diagnostic output; high logic level indicates driver shutdown due to overtemperature or short circuit, reset by ENN=high."
},
{
"number": "12",
"name": "INDEX",
"type": "output",
"description": "Configurable index output; provides pulse at microstep counter zero position indicating one electrical rotation or toggle on internal step pulses."
},
{
"number": "13",
"name": "CLK",
"type": "input",
"description": "Clock input; tie to GND with short wire for internal 12MHz trimmed oscillator or supply external 4-18MHz clock for precise timing."
},
{
"number": "14",
"name": "PDN_UART",
"type": "bidirectional",
"description": "Power down not control input and optional single-wire UART interface; low enables automatic standstill current reduction, or bidirectional data line when UART configured."
},
{
"number": "15",
"name": "VCC_IO",
"type": "power_in",
"description": "Digital IO supply voltage 3.3V to 5V; provides logic levels for all digital control and signal pins."
},
{
"number": "16",
"name": "STEP",
"type": "input",
"description": "Step pulse input; rising edge (or both edges if DEDGE enabled) increments/decrements microstep counter with selected resolution."
},
{
"number": "17",
"name": "VREF",
"type": "power_in",
"description": "Analog reference voltage input 0-2.5V for motor current scaling; or reference current input when using internal RDSon current sensing mode."
},
{
"number": "18",
"name": "GND",
"type": "power_in",
"description": "Ground reference; connect to GND plane with short path near pin."
},
{
"number": "19",
"name": "DIR",
"type": "input",
"description": "Direction input with internal pull-down resistor; high level commands reverse motor rotation, low level commands forward rotation."
},
{
"number": "20",
"name": "N.C.",
"type": "unconnected",
"description": "Unused pin; leave open or connect to GND for compatibility to future device versions."
},
{
"number": "21",
"name": "OA2",
"type": "output",
"description": "Motor coil A output 2; open drain output stage that directly drives motor phase A terminal."
},
{
"number": "22",
"name": "VS",
"type": "power_in",
"description": "Motor supply voltage 4.75-36V DC; provide bulk filtering with low ESR electrolytics and short GND return path."
},
{
"number": "23",
"name": "BRA",
"type": "input",
"description": "Sense resistor connection for coil A; place external sense resistor to GND near pin or tie to GND when using internal RDSon current sensing mode."
},
{
"number": "24",
"name": "OA1",
"type": "output",
"description": "Motor coil A output 1; open drain output stage that directly drives motor phase A terminal."
},
{
"number": "25",
"name": "N.C.",
"type": "unconnected",
"description": "Unused pin; leave open or connect to GND for compatibility to future device versions."
},
{
"number": "26",
"name": "OB1",
"type": "output",
"description": "Motor coil B output 1; open drain output stage that directly drives motor phase B terminal."
},
{
"number": "27",
"name": "BRB",
"type": "input",
"description": "Sense resistor connection for coil B; place external sense resistor to GND near pin or tie to GND when using internal RDSon current sensing mode."
},
{
"number": "28",
"name": "VS",
"type": "power_in",
"description": "Motor supply voltage 4.75-36V DC; provide bulk filtering with low ESR electrolytics and short GND return path."
},
{
"number": "29",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Exposed die pad listed in table but without discrete pin number; datasheet indicates it serves as GN",
"exposed pad 29 added from the footprint"
],
"pages_sent": 81,
"cost_usd": 0.6338,
"at": "2026-09-17T18:14:01"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182891412209664",
"pages": 81,
"sha256": "255c42856d78b0c7",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 29,
"described": 29,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tmc2208-la-t.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.92
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e9d6d740f505b03e5aa0ac826330f9e269344b84656d051f50eb07ac162749eb",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tmc2208-la-t-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.92
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "8425158f59e3ba5fe6032d3807bb06d18605ea6fdaaee843741320708885cc0c",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}