TMAG5328A1DQDBVR

{
  "slug": "tmag5328a1dqdbvr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Linear Hall Sensors, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "magnetic sensors",
    "tmag5328a1dqdbvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tmag5328a1dqdbvr.kicad_sym",
    "tmag5328a1dqdbvr.kicad_mod",
    "tmag5328a1dqdbvr.glb",
    "tmag5328a1dqdbvr.step",
    "tmag5328a1dqdbvr.lbr",
    "docs/hero.png",
    "docs/tmag5328a1dqdbvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tmag5328a1dqdbvr-hero.glb",
    "tmag5328a1dqdbvr-hero.overlay.json",
    "tmag5328a1dqdbvr-etched.glb"
  ],
  "component": {
    "mpn": "TMAG5328A1DQDBVR",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Magnetic Sensors",
    "subcategory": "Linear Hall Sensors",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tmag5328",
    "parts": {
      "symbol": "tmag5328a1dqdbvr.kicad_sym",
      "footprint": "tmag5328a1dqdbvr.kicad_mod",
      "model_3d": "tmag5328a1dqdbvr-hero.glb",
      "model_3d_plain": "tmag5328a1dqdbvr-etched.glb",
      "model_3d_step": "tmag5328a1dqdbvr-etched.step",
      "model_3d_step_plain": "tmag5328a1dqdbvr.step",
      "lbr": "tmag5328a1dqdbvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C5220641",
      "digikey": "296-TMAG5328A1DQDBVRTR-ND",
      "mouser": "595-TMAG5328A1DQDBVR"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T07:23:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TMAG5328A1DQDBVRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TMAG5328A1DQDBVR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TEST1",
        "type": "unconnected",
        "description": "TI recommends leaving this pin floating; its absolute maximum voltage range is -0.3 V to VCC + 0.3 V and its pin current is limited to ±5 mA."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "3",
        "name": "ADJ",
        "type": "input",
        "description": "Sets the upper BOP threshold and can be driven by a resistor from 2 kΩ to 15 kΩ or a voltage from 160 mV to 1200 mV, with an absolute maximum of -0.3 V to 5.5 V."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage of 1.65 V to 5.5 V; TI recommends a ceramic decoupling capacitor of at least 0.1 µF to GND."
      },
      {
        "number": "5",
        "name": "TEST2",
        "type": "passive",
        "description": "TI recommends connecting this pin to GND; its absolute maximum voltage range is -0.3 V to 0.3 V."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Push-pull (CMOS) omnipolar output that goes low when the magnetic flux exceeds BOP and returns high when it falls below BRP; its absolute maximum pin current is ±5 mA."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet only gives TEST1 as 'leave floating' and TEST2 as 'connect to GND'; the KiCad ERC type; ADJ type 'input' follows the pin table's 'I' code, but the pin is designed to be driven by a resisto; The pin table and descriptions come from the Chinese translation (SLYS044 is the English original, w"
        ],
        "pages_sent": 29,
        "cost_usd": 0.1018,
        "at": "2026-10-17T07:22:46"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tmag5328",
        "pages": 29,
        "sha256": "755eb8b0816d7309",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tmag5328a1dqdbvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tmag5328a1dqdbvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e89ccdb51032c070fc969378cabe4501553322ddfe28885a147f2b60c0605a64",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}