component
TMAG5111B2AQDBVR
Public Made by Adomby adom
Texas Instruments Hall Sensor, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTMAG5111B2AQDBVR
Texas Instruments · Hall Sensor · SOT-23-5
TMAG5111B2AQDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | 2.5V to 38V supply; connect a ceramic capacitor of at least 0.01µF between VCC and ground. |
| 2 | GND | power_in | Ground reference. |
| 3 | NC | unconnected | No internal connection; recommended to be connected to the ground pin. |
| 4 | OUT1 | output | Open-drain output 1 (10mA max sink current); for TMAG5111 it is the speed output. |
| 5 | OUT2 | output | Open-drain output 2 (10mA max sink current); for TMAG5111 it is the direction output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Sensors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply current (TMAG511xx2) | ICC | 6 | 8 | mA | VCC = 2.5V to 38V, TA = -40°C to 125°C | 6 | |
| Low-level output voltage | VOL | 0 | 0.5 | V | IOL = 10mA | 6 | |
| Output leakage current | IOH | 0.1 | 1 | µA | VCC= 5V | 6 | |
| Output short-circuit current | ISC | 65 | 110 | mA | 6 | ||
| Reverse battery current | IRCC | -100 | µA | VCC = -20 V | 6 | ||
| Power-on time | tON | 52.5 | µs | 6 | |||
| Propagation delay time | tPD | 12.5 | µs | Change in BOP or BRP changes output | 6 | ||
| Output rise time | tR | 0.2 | µs | RL= 1kΩ, CL= 50pF | 6 | ||
| Output fall time | tF | 0.2 | µs | RL= 1kΩ, CL= 50pF | 6 | ||
| Chopping frequency | fCHOP | 320 | kHz | 6 | |||
| Signal bandwidth | fBW | 40 | kHz | 6 | |||
| Magnetic operate point | BOP(1), BOP(2) | 0.2 | 1.4 | 2.6 | mT | VCC = 2.5V to 38V, TA = -40°C to 125°C | 6 |
| Magnetic release point | BRP(1), BRP(2) | -2.6 | -1.4 | -0.2 | mT | VCC = 2.5V to 38V, TA = -40°C to 125°C | 6 |
| Hysteresis | BHYS(1), BHYS(2) | 0.9 | 2.75 | 4.6 | mT | BOP - BRP | 6 |
| Symmetry | BSYM(1), BSYM(2) | -2 | 2 | mT | BOP(1) + BRP(1), BOP(2) + BRP(2) | 6 | |
| Operate point symmetry | BSYM_OP | -1.5 | 1.5 | mT | BOP(1) - BOP(2) | 6 | |
| Release point symmetry | BSYM_RP | -1.5 | 1.5 | mT | BRP(1) - BRP(2) | 6 | |
| Supply voltage | VCC | 2.5 | 38 | V | 5 | ||
| Output pin voltage (OUT1, OUT2) | VO | 0 | 38 | V | 5 | ||
| Output pin sink current (OUT1, OUT2) | ISINK | 0 | 10 | mA | Power dissipation and thermal limits must be observed | 5 | |
| Ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Supply voltage | VCC | -20 | 40 | V | 5 | ||
| Voltage ramp rate (VCC > 5V) | 0 | 2 | V/µs | VCC > 5V | 5 | ||
| Output pin voltage VOUT1, VOUT2 | VOUT | 40 | V | Minimum printed as GND, 0.5 | 5 | ||
| Output pin reverse current during reverse supply condition | 0 | 100 | mA | 5 | |||
| Junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | HBM per ANSI/ESDA/JEDEC JS-001, all pins | 5 | |
| ESD CDM | V(ESD) | -500 | 500 | V | CDM per JEDEC JESD22-C101, all pins | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 166.5 | °C/W | DBV (SOT-23) 5 pin | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 86 | °C/W | DBV (SOT-23) 5 pin | 5 | ||
| Junction-to-board thermal resistance | RθJB | 37.6 | °C/W | DBV (SOT-23) 5 pin | 5 | ||
| Junction-to-top characterization parameter | ΨJT | 14.1 | °C/W | DBV (SOT-23) 5 pin | 5 | ||
| Junction-to-board characterization parameter | ΨJB | 37.3 | °C/W | DBV (SOT-23) 5 pin | 5 |
CAD (KiCad official)
- Symbol:
TMAG5111B2AQDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tmag5111b2aqdbvr-etched.step/tmag5111b2aqdbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmag5111b2aqdbvr.step/tmag5111b2aqdbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
4226fad5cd32ea9e, retrieved 2026-10-22, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).