Generated by kicad-footprint-generator · KiCad file format 20260206
TMAG5111A2AQDBVR
Texas Instruments · Hall Sensor · SOT-23-5
TMAG5111A2AQDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | 2.5V to 38V supply; connect a ceramic capacitor of at least 0.01µF between VCC and ground. |
| 2 | GND | power_in | Ground reference. |
| 3 | NC | unconnected | No internal connection; recommended to be connected to the ground pin. |
| 4 | OUT1 | output | Open-drain output 1 (sinks up to 10mA); for TMAG5111 it is the speed output. |
| 5 | OUT2 | output | Open-drain output 2 (sinks up to 10mA); for TMAG5111 it is the direction output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Sensors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -20 | 40 | V | 5 | ||
| Voltage ramp rate (VCC > 5V) | 0 | 2 | V/µs | VCC > 5V | 5 | ||
| Output pin voltage | VOUT1, VOUT2 | -0.5 | 40 | V | GND, 0.5 to 40 V (min printed as GND, 0.5) | 5 | |
| Output pin reverse current in reverse supply condition | 0 | 100 | mA | 5 | |||
| Junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | HBM, ANSI/ESDA/JEDEC JS-001, all pins | 5 | |
| ESD CDM | V(ESD) | -500 | 500 | V | CDM, JESD22-C101, all pins | 5 | |
| Supply voltage | VCC | 2.5 | 38 | V | 5 | ||
| Output pin voltage (OUT1, OUT2) | VO | 0 | 38 | V | 5 | ||
| Output pin sink current (OUT1, OUT2) | ISINK | 0 | 10 | mA | 5 | ||
| Ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 166.5 | °C/W | DBV (SOT-23), 5 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 86 | °C/W | DBV (SOT-23), 5 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 37.6 | °C/W | DBV (SOT-23), 5 pins | 5 | ||
| Junction-to-top characterization parameter | ΨJT | 14.1 | °C/W | DBV (SOT-23), 5 pins | 5 | ||
| Junction-to-board characterization parameter | ΨJB | 37.3 | °C/W | DBV (SOT-23), 5 pins | 5 | ||
| Operating supply current TMAG511xx2 | ICC | 6 | 8 | mA | VCC = 2.5V to 38V, TA = -40°C to 125°C | 6 | |
| Reverse battery current | IRCC | -100 | µA | VCC = -20 V | 6 | ||
| Low-level output voltage | VOL | 0 | 0.5 | V | IOL = 10mA | 6 | |
| Output leakage current | IOH | 0.1 | 1 | µA | VCC= 5V | 6 | |
| Output short-circuit current | ISC | 65 | 110 | mA | 6 | ||
| Magnetic operate point | BOP(1), BOP(2) | 0.2 | 1.4 | 2.6 | mT | TMAG5111x2; VCC = 2.5V to 38V, TA = -40°C to 125°C | 6 |
| Magnetic release point | BRP(1), BRP(2) | -2.6 | -1.4 | -0.2 | mT | TMAG5110x2 column; VCC = 2.5V to 38V, TA = -40°C to 125°C | 6 |
| Hysteresis | BHYS(1), BHYS(2) | 0.9 | 2.75 | 4.6 | mT | BOP - BRP | 6 |
| Symmetry | BSYM(1), BSYM(2) | -2 | 2 | mT | BOP(1) + BRP(1), BOP(2) + BRP(2) | 6 | |
| Operate point symmetry | BSYM_OP | -1.5 | 1.5 | mT | BOP(1) - BOP(2) | 6 | |
| Release point symmetry | BSYM_RP | -1.5 | 1.5 | mT | BRP(1) - BRP(2) | 6 | |
| Power-on time | tON | 52.5 | µs | 6 | |||
| Propagation delay time | tPD | 12.5 | µs | Change in BOP or BRP changes output | 6 | ||
| Output rise time | tR | 0.2 | µs | RL= 1kΩ, CL= 50pF | 6 | ||
| Output fall time | tF | 0.2 | µs | RL= 1kΩ, CL= 50pF | 6 | ||
| Chopping frequency | fCHOP | 320 | kHz | 6 | |||
| Signal bandwidth | fBW | 40 | kHz | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TMAG5111A2AQDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tmag5111a2aqdbvr-etched.step/tmag5111a2aqdbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmag5111a2aqdbvr.step/tmag5111a2aqdbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
4226fad5cd32ea9e, retrieved 2026-11-13, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).