component
TM7705
Public Made by Adomby adom
TM Shenzhen Titan Micro Elec Analog To Digital Converters (ADC), SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# TM7705++**TM Shenzhen Titan Micro Elec** · Analog To Digital Converters (ADC) · SOIC-16++TM7705 from TM Shenzhen Titan Micro Elec, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SCLK | input | Schmitt logic input for serial clock; applies external serial clock to access TM7705 serial data in continuous or non-continuous mode. |+| 2 | MCLK IN | input | Master clock input for converter; accepts crystal, resonator, or external CMOS-compatible clock signal with frequency range 500kHz to 5MHz. |+| 3 | MCLK OUT | output | Master clock output connected with MCLK IN for crystal/resonator oscillator operation; provides inverted clock if external clock applied; disableable via CLK DIS bit. |+| 4 | CS | input | Active-low chip select input; selects TM7705 for three-wire serial interface operation; can serve as frame synchronization in multi-device systems. |+| 5 | RESET | input | Active-low reset input; resets control logic, interface logic, calibration coefficients, digital filter, and analog modulator to power-up state. |+| 6 | AIN2(+) | input | Positive input of fully-differential analog input channel 2; accepts differential signals relative to AIN2(-) from GND-30mV to VDD+30mV. |+| 7 | AIN1(+) | input | Positive input of fully-differential analog input channel 1; accepts differential signals relative to AIN1(-) from GND-30mV to VDD+30mV. |+| 8 | AIN1(-) | input | Negative input of fully-differential analog input channel 1; serves as reference point for differential input measurements; absolute voltage -0.3V to VDD+0.3V. |+| 9 | REF IN(+) | input | Positive differential reference input; must exceed REF IN(-); difference voltage 1V minimum to 3V maximum depending on VDD and specified performance. |+| 10 | REF IN(-) | input | Negative differential reference input; accepts voltages between GND and VDD provided REF IN(+) exceeds this voltage. |+| 11 | AIN2(-) | input | Negative input of fully-differential analog input channel 2; serves as reference point for differential input measurements; absolute voltage -0.3V to VDD+0.3V. |+| 12 | DRDY | output | Logic output; pulses low when new output word available in data register; returns high during register update (minimum 500×tCLKIN); indicates calibration completion. |+| 13 | DOUT | output | Serial data output from internal shift register; delivers conversion results and register contents selected by communication register bits RS2-RS0. |+| 14 | DIN | input | Serial data input to internal shift register; accepts configuration data routed to registers selected by communication register bits RS2-RS0. |+| 15 | VDD | power_in | Power supply voltage input; operating range +2.7V to +3.3V or +4.75V to +5.25V for specified performance; maximum ratings -0.3V to +7V. |+| 16 | GND | power_in | Ground reference; internal circuit ground potential reference point; provides system ground return path. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | TM Shenzhen Titan Micro Elec |+| Package | SOIC-16 |+| Category | Data Acquisition |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TM7705`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `tm7705-etched.step` / `tm7705-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tm7705.step` / `tm7705.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [TM Shenzhen Titan Micro Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882524201734144) (42 pp, sha256 `89909833ebc41aa8`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tm7705-datasheet.pdf)
page.jsonadded+189@@ -0,0 +1,189 @@+{+ "slug": "tm7705",+ "version": "0.1.0",+ "type": "component",+ "description": "TM Shenzhen Titan Micro Elec Analog To Digital Converters (ADC), SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "tm7705",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tm7705.kicad_sym",+ "tm7705.kicad_mod",+ "tm7705.glb",+ "tm7705.step",+ "tm7705.lbr",+ "docs/hero.png",+ "docs/tm7705-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TM7705",+ "manufacturer": "TM Shenzhen Titan Micro Elec",+ "package": "SOIC-16",+ "pin_count": 16,+ "category": "Data Acquisition",+ "subcategory": "Analog To Digital Converters (ADC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882524201734144",+ "parts": {+ "symbol": "tm7705.kicad_sym",+ "footprint": "tm7705.kicad_mod",+ "model_3d": "tm7705-etched.glb",+ "model_3d_plain": "tm7705.glb",+ "model_3d_step": "tm7705-etched.step",+ "model_3d_step_plain": "tm7705.step",+ "lbr": "tm7705.lbr"+ },+ "distributor_links": {+ "lcsc": "C77545"+ },+ "pins": [+ {+ "number": "1",+ "name": "SCLK",+ "type": "input",+ "description": "Schmitt logic input for serial clock; applies external serial clock to access TM7705 serial data in continuous or non-continuous mode."+ },+ {+ "number": "2",+ "name": "MCLK IN",+ "type": "input",+ "description": "Master clock input for converter; accepts crystal, resonator, or external CMOS-compatible clock signal with frequency range 500kHz to 5MHz."+ },+ {+ "number": "3",+ "name": "MCLK OUT",+ "type": "output",+ "description": "Master clock output connected with MCLK IN for crystal/resonator oscillator operation; provides inverted clock if external clock applied; disableable via CLK DIS bit."+ },+ {+ "number": "4",+ "name": "CS",+ "type": "input",+ "description": "Active-low chip select input; selects TM7705 for three-wire serial interface operation; can serve as frame synchronization in multi-device systems."+ },+ {+ "number": "5",+ "name": "RESET",+ "type": "input",+ "description": "Active-low reset input; resets control logic, interface logic, calibration coefficients, digital filter, and analog modulator to power-up state."+ },+ {+ "number": "6",+ "name": "AIN2(+)",+ "type": "input",+ "description": "Positive input of fully-differential analog input channel 2; accepts differential signals relative to AIN2(-) from GND-30mV to VDD+30mV."+ },+ {+ "number": "7",+ "name": "AIN1(+)",+ "type": "input",+ "description": "Positive input of fully-differential analog input channel 1; accepts differential signals relative to AIN1(-) from GND-30mV to VDD+30mV."+ },+ {+ "number": "8",+ "name": "AIN1(-)",+ "type": "input",+ "description": "Negative input of fully-differential analog input channel 1; serves as reference point for differential input measurements; absolute voltage -0.3V to VDD+0.3V."+ },+ {+ "number": "9",+ "name": "REF IN(+)",+ "type": "input",+ "description": "Positive differential reference input; must exceed REF IN(-); difference voltage 1V minimum to 3V maximum depending on VDD and specified performance."+ },+ {+ "number": "10",+ "name": "REF IN(-)",+ "type": "input",+ "description": "Negative differential reference input; accepts voltages between GND and VDD provided REF IN(+) exceeds this voltage."+ },+ {+ "number": "11",+ "name": "AIN2(-)",+ "type": "input",+ "description": "Negative input of fully-differential analog input channel 2; serves as reference point for differential input measurements; absolute voltage -0.3V to VDD+0.3V."+ },+ {+ "number": "12",+ "name": "DRDY",+ "type": "output",+ "description": "Logic output; pulses low when new output word available in data register; returns high during register update (minimum 500×tCLKIN); indicates calibration completion."+ },+ {+ "number": "13",+ "name": "DOUT",+ "type": "output",+ "description": "Serial data output from internal shift register; delivers conversion results and register contents selected by communication register bits RS2-RS0."+ },+ {+ "number": "14",+ "name": "DIN",+ "type": "input",+ "description": "Serial data input to internal shift register; accepts configuration data routed to registers selected by communication register bits RS2-RS0."+ },+ {+ "number": "15",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply voltage input; operating range +2.7V to +3.3V or +4.75V to +5.25V for specified performance; maximum ratings -0.3V to +7V."+ },+ {+ "number": "16",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference; internal circuit ground potential reference point; provides system ground return path."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 42,+ "cost_usd": 0.4119,+ "at": "2026-09-22T09:05:07"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882524201734144",+ "pages": 42,+ "sha256": "89909833ebc41aa8",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}