main
Ray
Publish 0.1.0
2756561
TM512AC4
TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-16
TM512AC4 from TM(Shenzhen Titan Micro Elec), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Negative power supply terminal (ground), and all datasheet voltages are referenced to system ground. |
| 2 | OUTR | output | PWM-driven constant-current sink output for the red channel, rated at 30 V with 3 to 80 mA set by REXT. |
| 3 | OUTG | output | PWM-driven constant-current sink output for the green channel, rated at 30 V with 3 to 80 mA set by REXT. |
| 4 | OUTB | output | PWM-driven constant-current sink output for the blue channel, rated at 30 V with 3 to 80 mA set by REXT. |
| 5 | OUTW | output | PWM-driven constant-current sink output for the white channel, rated at 30 V with 3 to 80 mA set by REXT. |
| 6 | REXT | input | Constant-current feedback pin where a resistor to ground sets the output current, Iout = 48/(400+Rext), and it must not be left floating in normal use. |
| 7 | ADRO | output | Address write-code line output with a minimum sink and source current of 10 mA at 0.4 V and 4 V respectively. |
| 8 | DO | output | Decoded forwarding output that gives an 800 Kbps single-wire signal to control 18 and 19 series ICs, with a minimum sink and source current of 10 mA. |
| 9 | TST | input | Test pin with an internal pull-down that is used for testing. |
| 10 | ADRI | input | Address write-code line input with an internal pull-up, where the high-level input must be at least 0.7 Vdd. |
| 11 | AI | input | Positive side of the differential DMX512 input, with a common-mode voltage up to 8 V and an input resistance of 270 kOhm. |
| 12 | BI | input | Negative side of the differential DMX512 input, paired with AI and driven in opposite phase. |
| 13 | PWM | input | Output polarity select that is normally left floating, and connecting it to VDD gives reversed polarity and reduces the refresh rate to 500 Hz. |
| 14 | NC | unconnected | No connection pin. |
| 15 | NC | unconnected | No connection pin. |
| 16 | VDD | power_in | Positive logic supply, specified for 4.5 V to 5.5 V in the electrical characteristics. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-16 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage | Vdd | 3.8 | 5.5 | 6 | V | 4 | |
| Logic supply voltage | Vdd | 5.5 | 6.5 | V | 4 | ||
| Logic input voltage | Vi | -0.5 | V | 4 | |||
| Output port withstand voltage | Vout | 30 | V | 4 | |||
| Output port withstand voltage | Vout | 30 | V | 4 | |||
| Operating temperature | Topt | -40 | 85 | ℃ | 4 | ||
| Storage temperature | Tstg | -55 | 150 | ℃ | 4 | ||
| ESD | 4000 | V | 4 | ||||
| Package power dissipation | Pd | 800 | mW | 4 | |||
| Low-level output current | Iol | 10 | mA | Vo=0.4V, DO, ADRO | 4 | ||
| High-level output current | Ioh | 10 | mA | Vo=4V, DO, ADRO | 4 | ||
| Differential input common-mode voltage | Vcm | 8 | V | 4 | |||
| Differential input current | Iab | 28 | µA | VDD=5V | 4 | ||
| Differential input threshold voltage | Vth | -0.2 | 0.2 | V | 0V<Vcm<8V | 4 | |
| Differential input hysteresis voltage | 70 | mV | Vcm=0V | 4 | |||
| Differential input impedance | Rin | 270 | KΩ | 4 | |||
| Output pin current | Isink | 3 | 80 | mA | OUTR, OUTG, OUTB, OUTW (REXT to GND resistor 550Ω) | 4 | |
| Channel current offset | dIout | -3 | 3 | % | Vds=1V, Iout=17mA | 4 | |
| Chip-to-chip current offset | dIout | -5 | 5 | % | Vds=1V, Iout=17mA | 4 | |
| Voltage offset VS-Vds | %dVds | -0.5 | 0.5 | %/V | 1V<Vds<3V | 4 | |
| Voltage offset VS-Vdd | %dVds | -2 | 2 | %/V | 4.5V<Vdd<5.5V | 4 | |
| Dynamic current consumption | IDDdyn | 4 | mA | VDD=5V, no load | 4 | ||
| Power consumption | PD | 650 | mW | Ta=25℃ | 4 |
CAD (KiCad official)
- Symbol:
TM512AC4 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
tm512ac4-etched.step/tm512ac4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm512ac4.step/tm512ac4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (13 pp, sha256
3e6907ebb6ca903e, retrieved 2026-11-02, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TM512AC4
**TM(Shenzhen Titan Micro Elec)** · LED Drivers · SOP-16
TM512AC4 from TM(Shenzhen Titan Micro Elec), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Negative power supply terminal (ground), and all datasheet voltages are referenced to system ground. |
| 2 | OUTR | output | PWM-driven constant-current sink output for the red channel, rated at 30 V with 3 to 80 mA set by REXT. |
| 3 | OUTG | output | PWM-driven constant-current sink output for the green channel, rated at 30 V with 3 to 80 mA set by REXT. |
| 4 | OUTB | output | PWM-driven constant-current sink output for the blue channel, rated at 30 V with 3 to 80 mA set by REXT. |
| 5 | OUTW | output | PWM-driven constant-current sink output for the white channel, rated at 30 V with 3 to 80 mA set by REXT. |
| 6 | REXT | input | Constant-current feedback pin where a resistor to ground sets the output current, Iout = 48/(400+Rext), and it must not be left floating in normal use. |
| 7 | ADRO | output | Address write-code line output with a minimum sink and source current of 10 mA at 0.4 V and 4 V respectively. |
| 8 | DO | output | Decoded forwarding output that gives an 800 Kbps single-wire signal to control 18 and 19 series ICs, with a minimum sink and source current of 10 mA. |
| 9 | TST | input | Test pin with an internal pull-down that is used for testing. |
| 10 | ADRI | input | Address write-code line input with an internal pull-up, where the high-level input must be at least 0.7 Vdd. |
| 11 | AI | input | Positive side of the differential DMX512 input, with a common-mode voltage up to 8 V and an input resistance of 270 kOhm. |
| 12 | BI | input | Negative side of the differential DMX512 input, paired with AI and driven in opposite phase. |
| 13 | PWM | input | Output polarity select that is normally left floating, and connecting it to VDD gives reversed polarity and reduces the refresh rate to 500 Hz. |
| 14 | NC | unconnected | No connection pin. |
| 15 | NC | unconnected | No connection pin. |
| 16 | VDD | power_in | Positive logic supply, specified for 4.5 V to 5.5 V in the electrical characteristics. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-16 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage | Vdd | 3.8 | 5.5 | 6 | V | | 4 |
| Logic supply voltage | Vdd | 5.5 | | 6.5 | V | | 4 |
| Logic input voltage | Vi | -0.5 | | | V | | 4 |
| Output port withstand voltage | Vout | | | 30 | V | | 4 |
| Output port withstand voltage | Vout | | | 30 | V | | 4 |
| Operating temperature | Topt | -40 | | 85 | ℃ | | 4 |
| Storage temperature | Tstg | -55 | | 150 | ℃ | | 4 |
| ESD | | | | 4000 | V | | 4 |
| Package power dissipation | Pd | | | 800 | mW | | 4 |
| Low-level output current | Iol | 10 | | | mA | Vo=0.4V, DO, ADRO | 4 |
| High-level output current | Ioh | 10 | | | mA | Vo=4V, DO, ADRO | 4 |
| Differential input common-mode voltage | Vcm | | | 8 | V | | 4 |
| Differential input current | Iab | | | 28 | µA | VDD=5V | 4 |
| Differential input threshold voltage | Vth | -0.2 | | 0.2 | V | 0V<Vcm<8V | 4 |
| Differential input hysteresis voltage | | | | 70 | mV | Vcm=0V | 4 |
| Differential input impedance | Rin | | | 270 | KΩ | | 4 |
| Output pin current | Isink | 3 | | 80 | mA | OUTR, OUTG, OUTB, OUTW (REXT to GND resistor 550Ω) | 4 |
| Channel current offset | dIout | -3 | | 3 | % | Vds=1V, Iout=17mA | 4 |
| Chip-to-chip current offset | dIout | -5 | | 5 | % | Vds=1V, Iout=17mA | 4 |
| Voltage offset VS-Vds | %dVds | -0.5 | | 0.5 | %/V | 1V<Vds<3V | 4 |
| Voltage offset VS-Vdd | %dVds | -2 | | 2 | %/V | 4.5V<Vdd<5.5V | 4 |
| Dynamic current consumption | IDDdyn | | | 4 | mA | VDD=5V, no load | 4 |
| Power consumption | PD | | | 650 | mW | Ta=25℃ | 4 |
## CAD (KiCad official)
- Symbol: `TM512AC4`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `tm512ac4-etched.step` / `tm512ac4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tm512ac4.step` / `tm512ac4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TM(Shenzhen Titan Micro Elec) datasheet](docs/tm512ac4-datasheet.pdf) (13 pp, sha256 `3e6907ebb6ca903e`, retrieved 2026-11-02, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tm512ac4-datasheet.pdf)