main
Ray
Publish 0.1.0
bc21cc3
TM5101
TM(Shenzhen Titan Micro Elec) · AC-DC Controllers & Regulators · SOP-8
TM5101 from TM(Shenzhen Titan Micro Elec), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Voltage feedback pin; connecting an optocoupler to ground adjusts the duty cycle, with FB input impedance 6.0 kΩ and open-circuit voltage 4.4 to 5.0 V. |
| 2 | NC | unconnected | No connection (empty pin). |
| 3 | VDD | power_in | Supply input; start-up threshold VDD-ON is 13.5 to 15.5 V, recommended operating range 10 to 23 V, absolute maximum 30 V. |
| 4 | GATE | output | Drive output for an external MOSFET, with output clamp voltage 17 to 18 V. |
| 5 | CS | input | Current sense pin connected to the MOS source, using an external resistor to sense MOS current; input voltage limit -0.3 to 5.0 V. |
| 6 | NC | unconnected | No connection (empty pin). |
| 7 | NC | unconnected | No connection (empty pin). |
| 8 | GND | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电压 (supply voltage, recommended) | VDD | 10 | 23 | V | 3 | ||
| 供电电压 (supply voltage, absolute maximum) | VDD | 30 | V | 3 | |||
| FB 引脚输入电压 (recommended) | VFB | 0 | 5.5 | V | 3 | ||
| FB 引脚输入电压 (absolute maximum) | VFB | -0.3 | 7 | V | 3 | ||
| CS 引脚输入电压 | VCS | -0.3 | 5 | V | 3 | ||
| 工作环境温度 (recommended) | TA | -20 | 80 | °C | 3 | ||
| 工作环境温度 (absolute maximum) | TA | -40 | 130 | °C | 3 | ||
| 工作结点温度 | TJ | -40 | 150 | °C | 3 | ||
| 存储温度范围 | TSTG | -40 | 150 | °C | 3 | ||
| 焊接温度 | TL | 260 | °C | 10 秒 (10 s) | 3 | ||
| ESD 抗静电能力 (human body model) | ESD | 2 | kV | 人体模式, JESD22-A114 | 3 | ||
| ESD 抗静电能力 (machine model) | ESD | 0.2 | kV | 机器模式, JESD22-A115 | 3 | ||
| 热阻(结点到外壳) | θJC | 82.5 | °C/W | 3 | |||
| 启动电压 | VDD-ON | 13.5 | 14.5 | 15.5 | V | 4 | |
| 关闭电压 | VDD-OFF | 8 | 9 | 10 | V | 4 | |
| 启动电流 | IDD-ST | 5 | 20 | uA | VDD=VDD-ON- 0.5V | 4 | |
| 正常工作电流 | IDD-OP | 2.5 | 4 | mA | 4 | ||
| VDD 过压保护 | VDD-OVP | 23 | 24 | V | 4 | ||
| VDD 钳位电压 | VDD-CLAMP | 25 | 27 | V | IDD=5mA | 4 | |
| PWM 比较器增益 | AV | 1.7 | V/V | 4 | |||
| FB 开路电压 | VFB-OPEN | 4.4 | 4.7 | 5 | V | 4 | |
| FB 过载电压阀值 | VFB-PL | 3.7 | V | 4 | |||
| 过载延时时间 | TPD | 50 | ms | 4 | |||
| 进入跳周期模式 FB 电压 | VFB-BM | 1.4 | V | 4 | |||
| 电流限流值(最大占空比) | VCSTH-H | 1 | 1.1 | V | 最大占空比 | 4 | |
| 电流限制值(最小占空比) | VCSTH-L | 0.7 | 0.8 | V | 最小占空比 | 4 | |
| 前沿尖峰消隐时间 | TLEB | 350 | ns | 4 | |||
| 延时输出时间 | TPD | 60 | ns | 4 | |||
| ZCS CS 引脚输入阻抗 | ZCS | 5 | kΩ | 4 | |||
| FB 引脚输入阻抗 | ZFB | 6 | kΩ | 4 | |||
| VDD 跳周期模式电压 | VDD-BM | 10 | V | 4 | |||
| 振荡频率 | fOSC | 62 | 67 | 72 | kHz | 5 | |
| 跳周期振荡频率 | fOSC-BM | 20 | kHz | 5 | |||
| 抖频范围 | f△shuffling | 6 | % | 5 | |||
| 频偏 vs VDD电压 | fDV | 0.2 | 1 | % | VDD=10V to 23V | 5 | |
| 最大占空比 | DMAX | 75 | 80 | 85 | % | 5 | |
| 输出低电压 | VOL | 1.5 | V | VDD=15V,IO=20mA | 5 | ||
| 输出高电压 | VOH | 10 | V | VDD=15V,IO=20mA | 5 | ||
| 输出上升时间 | tR | 240 | nS | VDD=15V,CL=1nF | 5 | ||
| 输出下降时间 | tF | 75 | nS | VDD=15V,CL=1nF | 5 | ||
| 输出钳位电压 | VG-CLAMP | 17 | 18 | V | 5 |
CAD (KiCad official)
- Symbol:
TM5101 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tm5101-etched.step/tm5101-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm5101.step/tm5101.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (11 pp, sha256
44fdfc2fb5d66795, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TM5101
**TM(Shenzhen Titan Micro Elec)** · AC-DC Controllers & Regulators · SOP-8
TM5101 from TM(Shenzhen Titan Micro Elec), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Voltage feedback pin; connecting an optocoupler to ground adjusts the duty cycle, with FB input impedance 6.0 kΩ and open-circuit voltage 4.4 to 5.0 V. |
| 2 | NC | unconnected | No connection (empty pin). |
| 3 | VDD | power_in | Supply input; start-up threshold VDD-ON is 13.5 to 15.5 V, recommended operating range 10 to 23 V, absolute maximum 30 V. |
| 4 | GATE | output | Drive output for an external MOSFET, with output clamp voltage 17 to 18 V. |
| 5 | CS | input | Current sense pin connected to the MOS source, using an external resistor to sense MOS current; input voltage limit -0.3 to 5.0 V. |
| 6 | NC | unconnected | No connection (empty pin). |
| 7 | NC | unconnected | No connection (empty pin). |
| 8 | GND | power_in | Ground pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电压 (supply voltage, recommended) | VDD | 10 | | 23 | V | | 3 |
| 供电电压 (supply voltage, absolute maximum) | VDD | | | 30 | V | | 3 |
| FB 引脚输入电压 (recommended) | VFB | 0 | | 5.5 | V | | 3 |
| FB 引脚输入电压 (absolute maximum) | VFB | -0.3 | | 7 | V | | 3 |
| CS 引脚输入电压 | VCS | -0.3 | | 5 | V | | 3 |
| 工作环境温度 (recommended) | TA | -20 | | 80 | °C | | 3 |
| 工作环境温度 (absolute maximum) | TA | -40 | | 130 | °C | | 3 |
| 工作结点温度 | TJ | -40 | | 150 | °C | | 3 |
| 存储温度范围 | TSTG | -40 | | 150 | °C | | 3 |
| 焊接温度 | TL | | | 260 | °C | 10 秒 (10 s) | 3 |
| ESD 抗静电能力 (human body model) | ESD | | | 2 | kV | 人体模式, JESD22-A114 | 3 |
| ESD 抗静电能力 (machine model) | ESD | | | 0.2 | kV | 机器模式, JESD22-A115 | 3 |
| 热阻(结点到外壳) | θJC | | 82.5 | | °C/W | | 3 |
| 启动电压 | VDD-ON | 13.5 | 14.5 | 15.5 | V | | 4 |
| 关闭电压 | VDD-OFF | 8 | 9 | 10 | V | | 4 |
| 启动电流 | IDD-ST | | 5 | 20 | uA | VDD=VDD-ON- 0.5V | 4 |
| 正常工作电流 | IDD-OP | | 2.5 | 4 | mA | | 4 |
| VDD 过压保护 | VDD-OVP | | 23 | 24 | V | | 4 |
| VDD 钳位电压 | VDD-CLAMP | | 25 | 27 | V | IDD=5mA | 4 |
| PWM 比较器增益 | AV | | 1.7 | | V/V | | 4 |
| FB 开路电压 | VFB-OPEN | 4.4 | 4.7 | 5 | V | | 4 |
| FB 过载电压阀值 | VFB-PL | | 3.7 | | V | | 4 |
| 过载延时时间 | TPD | | 50 | | ms | | 4 |
| 进入跳周期模式 FB 电压 | VFB-BM | | 1.4 | | V | | 4 |
| 电流限流值(最大占空比) | VCSTH-H | | 1 | 1.1 | V | 最大占空比 | 4 |
| 电流限制值(最小占空比) | VCSTH-L | | 0.7 | 0.8 | V | 最小占空比 | 4 |
| 前沿尖峰消隐时间 | TLEB | | 350 | | ns | | 4 |
| 延时输出时间 | TPD | | 60 | | ns | | 4 |
| ZCS CS 引脚输入阻抗 | ZCS | | 5 | | kΩ | | 4 |
| FB 引脚输入阻抗 | ZFB | | 6 | | kΩ | | 4 |
| VDD 跳周期模式电压 | VDD-BM | | 10 | | V | | 4 |
| 振荡频率 | fOSC | 62 | 67 | 72 | kHz | | 5 |
| 跳周期振荡频率 | fOSC-BM | | 20 | | kHz | | 5 |
| 抖频范围 | f△shuffling | | 6 | | % | | 5 |
| 频偏 vs VDD电压 | fDV | | 0.2 | 1 | % | VDD=10V to 23V | 5 |
| 最大占空比 | DMAX | 75 | 80 | 85 | % | | 5 |
| 输出低电压 | VOL | | 1.5 | | V | VDD=15V,IO=20mA | 5 |
| 输出高电压 | VOH | | 10 | | V | VDD=15V,IO=20mA | 5 |
| 输出上升时间 | tR | | 240 | | nS | VDD=15V,CL=1nF | 5 |
| 输出下降时间 | tF | | 75 | | nS | VDD=15V,CL=1nF | 5 |
| 输出钳位电压 | VG-CLAMP | | 17 | 18 | V | | 5 |
## CAD (KiCad official)
- Symbol: `TM5101`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `tm5101-etched.step` / `tm5101-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tm5101.step` / `tm5101.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TM(Shenzhen Titan Micro Elec) datasheet](docs/tm5101-datasheet.pdf) (11 pp, sha256 `44fdfc2fb5d66795`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tm5101-datasheet.pdf)