TM4C1237H6PZI

{
  "schema_version": 1,
  "type": "component",
  "slug": "tm4c1237h6pzi",
  "title": "TM4C1237H6PZI",
  "brief": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "tm4c1237h6pzi",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TM4C1237H6PZI",
    "manufacturer": "Texas Instruments",
    "package": "LQFP-100(14x14)",
    "pin_count": 100,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tm4c1237h6pz",
    "parts": {
      "symbol": "tm4c1237h6pzi.kicad_sym",
      "footprint": "tm4c1237h6pzi.kicad_mod",
      "model_3d": "tm4c1237h6pzi-hero.glb",
      "model_3d_plain": "tm4c1237h6pzi.glb",
      "model_3d_step": "tm4c1237h6pzi-etched.step",
      "model_3d_step_plain": "tm4c1237h6pzi.step",
      "lbr": "tm4c1237h6pzi.lbr"
    },
    "distributor_links": {
      "lcsc": "C1339679",
      "digikey": "296-35832-ND",
      "mouser": "595-TM4C1237H6PZI"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T23:38:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-35832-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TM4C1237H6PZI",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PD0",
        "type": "bidirectional",
        "description": "GPIO port D bit 0, also ADC input AIN15, SSI1Clk/SSI3Clk, open-drain I2C3SCL, and WT2CCP0."
      },
      {
        "number": "2",
        "name": "PD1",
        "type": "bidirectional",
        "description": "GPIO port D bit 1, also ADC input AIN14, open-drain I2C3SDA, SSI1Fss/SSI3Fss, and WT2CCP1."
      },
      {
        "number": "3",
        "name": "PD2",
        "type": "bidirectional",
        "description": "GPIO port D bit 2, also ADC input AIN13, SSI1Rx/SSI3Rx, WT3CCP0, and USB0EPEN (output, Host mode power enable)."
      },
      {
        "number": "4",
        "name": "PD3",
        "type": "bidirectional",
        "description": "GPIO port D bit 3, also ADC input AIN12, SSI1Tx/SSI3Tx, WT3CCP1, and USB0PFLT (input, Host mode power fault)."
      },
      {
        "number": "5",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "7",
        "name": "VDDA",
        "type": "power_in",
        "description": "Positive supply for the analog circuits (ADC, Analog Comparators, etc.), which must meet the voltage specification in Table 22-5 regardless of system implementation."
      },
      {
        "number": "8",
        "name": "VREFA+",
        "type": "power_in",
        "description": "ADC positive reference voltage, which sets the input voltage converted to full scale (4095); its limits are given in Table 22-33 and it is not 5-V tolerant."
      },
      {
        "number": "9",
        "name": "VREFA-",
        "type": "power_in",
        "description": "ADC negative reference voltage, which sets the input voltage converted to 0; its limits are given in Table 22-33 and it is not 5-V tolerant."
      },
      {
        "number": "10",
        "name": "GNDA",
        "type": "power_in",
        "description": "Ground reference for the analog circuits (ADC, Analog Comparators, etc.), kept separate from GND to limit digital noise on analog functions."
      },
      {
        "number": "11",
        "name": "PJ2",
        "type": "bidirectional",
        "description": "GPIO port J bit 2, also T2CCP0, and UART5 receive (U5Rx) alternate functions."
      },
      {
        "number": "12",
        "name": "PE3",
        "type": "bidirectional",
        "description": "GPIO port E bit 3, also ADC input AIN0 (not 5-V tolerant)."
      },
      {
        "number": "13",
        "name": "PE2",
        "type": "bidirectional",
        "description": "GPIO port E bit 2, also ADC input AIN1 (not 5-V tolerant)."
      },
      {
        "number": "14",
        "name": "PE1",
        "type": "bidirectional",
        "description": "GPIO port E bit 1, also ADC input AIN2 (not 5-V tolerant) and UART7 transmit (U7Tx)."
      },
      {
        "number": "15",
        "name": "PE0",
        "type": "bidirectional",
        "description": "GPIO port E bit 0, also ADC input AIN3 (not 5-V tolerant) and UART7 receive (U7Rx)."
      },
      {
        "number": "16",
        "name": "PH0",
        "type": "bidirectional",
        "description": "GPIO port H bit 0, also ADC input AIN16, SSI3Clk, and WT2CCP0."
      },
      {
        "number": "17",
        "name": "PH1",
        "type": "bidirectional",
        "description": "GPIO port H bit 1, also ADC input AIN17, SSI3Fss, and WT2CCP1."
      },
      {
        "number": "18",
        "name": "PH2",
        "type": "bidirectional",
        "description": "GPIO port H bit 2, also ADC input AIN18, SSI3Rx, and WT5CCP0."
      },
      {
        "number": "19",
        "name": "PH3",
        "type": "bidirectional",
        "description": "GPIO port H bit 3, also ADC input AIN19, SSI3Tx, and WT5CCP1."
      },
      {
        "number": "20",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "21",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "22",
        "name": "PC7",
        "type": "bidirectional",
        "description": "GPIO port C bit 7, also analog comparator 0 negative input C0- (5-V tolerant analog input), UART3 transmit, USB0PFLT, and WT1CCP1."
      },
      {
        "number": "23",
        "name": "PC6",
        "type": "bidirectional",
        "description": "GPIO port C bit 6, also analog comparator 0 positive input C0+, UART3 receive, USB0EPEN, and WT1CCP0."
      },
      {
        "number": "24",
        "name": "PC5",
        "type": "bidirectional",
        "description": "GPIO port C bit 5, also analog comparator 1 positive input C1+, UART1 CTS/Tx, UART4 Tx, and WT0CCP1."
      },
      {
        "number": "25",
        "name": "PC4",
        "type": "bidirectional",
        "description": "GPIO port C bit 4, also analog comparator 1 negative input C1-, UART1 RTS/Rx, UART4 Rx, and WT0CCP0."
      },
      {
        "number": "26",
        "name": "PA0",
        "type": "bidirectional",
        "description": "GPIO port A bit 0, default function UART0 receive (U0Rx)."
      },
      {
        "number": "27",
        "name": "PA1",
        "type": "bidirectional",
        "description": "GPIO port A bit 1, default function UART0 transmit (U0Tx)."
      },
      {
        "number": "28",
        "name": "PA2",
        "type": "bidirectional",
        "description": "GPIO port A bit 2, also SSI0 clock (SSI0Clk)."
      },
      {
        "number": "29",
        "name": "PA3",
        "type": "bidirectional",
        "description": "GPIO port A bit 3, also SSI0 frame signal (SSI0Fss)."
      },
      {
        "number": "30",
        "name": "PA4",
        "type": "bidirectional",
        "description": "GPIO port A bit 4, also SSI0 receive (SSI0Rx)."
      },
      {
        "number": "31",
        "name": "PA5",
        "type": "bidirectional",
        "description": "GPIO port A bit 5, also SSI0 transmit (SSI0Tx)."
      },
      {
        "number": "32",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "33",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "34",
        "name": "PA6",
        "type": "bidirectional",
        "description": "GPIO port A bit 6, also open-drain I2C1SCL (the port pin should not be configured as open drain for I2C clock use)."
      },
      {
        "number": "35",
        "name": "PA7",
        "type": "bidirectional",
        "description": "GPIO port A bit 7, also open-drain I2C1SDA."
      },
      {
        "number": "36",
        "name": "PF6",
        "type": "bidirectional",
        "description": "GPIO port F bit 6, also open-drain I2C2SCL and T3CCP0."
      },
      {
        "number": "37",
        "name": "PF5",
        "type": "bidirectional",
        "description": "GPIO port F bit 5, also T2CCP1 and USB0PFLT (input, Host mode power fault)."
      },
      {
        "number": "38",
        "name": "VDDC",
        "type": "power_in",
        "description": "Core logic supply at 1.2 V from the on-chip LDO; VDDC pins should only be connected to each other and an external capacitor as specified in Table 22-12."
      },
      {
        "number": "39",
        "name": "PF4",
        "type": "bidirectional",
        "description": "GPIO port F bit 4, also T2CCP0, TRD3 trace output, U1DTR, and USB0EPEN."
      },
      {
        "number": "40",
        "name": "PF0",
        "type": "bidirectional",
        "description": "GPIO port F bit 0 (locked by default; commit control required for reprogramming), also NMI, analog comparator 0 output C0o, CAN0Rx, SSI1Rx, T0CCP0, TRD2, and U1RTS."
      },
      {
        "number": "41",
        "name": "PF1",
        "type": "bidirectional",
        "description": "GPIO port F bit 1, also analog comparator 1 output C1o, SSI1Tx, T0CCP1, TRD1, and U1CTS."
      },
      {
        "number": "42",
        "name": "PF2",
        "type": "bidirectional",
        "description": "GPIO port F bit 2, also analog comparator 2 output C2o, SSI1Clk, T1CCP0, TRD0, and U1DCD."
      },
      {
        "number": "43",
        "name": "PF3",
        "type": "bidirectional",
        "description": "GPIO port F bit 3, also CAN0Tx, SSI1Fss, T1CCP1, TRCLK trace clock, and U1DSR."
      },
      {
        "number": "44",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "45",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "46",
        "name": "PK3",
        "type": "bidirectional",
        "description": "GPIO port K bit 3, also SSI3 transmit (SSI3Tx)."
      },
      {
        "number": "47",
        "name": "PK2",
        "type": "bidirectional",
        "description": "GPIO port K bit 2, also SSI3 receive (SSI3Rx)."
      },
      {
        "number": "48",
        "name": "PK1",
        "type": "bidirectional",
        "description": "GPIO port K bit 1, also SSI3 frame signal (SSI3Fss)."
      },
      {
        "number": "49",
        "name": "PK0",
        "type": "bidirectional",
        "description": "GPIO port K bit 0, also SSI3 clock (SSI3Clk)."
      },
      {
        "number": "50",
        "name": "WAKE",
        "type": "input",
        "description": "External input that brings the processor out of Hibernate mode when asserted (TTL levels)."
      },
      {
        "number": "51",
        "name": "HIB",
        "type": "output",
        "description": "Output that indicates the processor is in Hibernate mode (TTL levels)."
      },
      {
        "number": "52",
        "name": "XOSC0",
        "type": "input",
        "description": "Hibernation module oscillator crystal input or external clock reference input for a 32.768-kHz crystal or oscillator."
      },
      {
        "number": "53",
        "name": "GNDX",
        "type": "power_in",
        "description": "Ground for the Hibernation oscillator; connect to digital ground with the crystal load capacitors, or to digital ground when using an external oscillator."
      },
      {
        "number": "54",
        "name": "XOSC1",
        "type": "output",
        "description": "Hibernation module oscillator crystal output; leave unconnected when using a single-ended clock source."
      },
      {
        "number": "55",
        "name": "VBAT",
        "type": "power_in",
        "description": "Power source for the Hibernation module, normally connected to the positive terminal of a battery as backup supply."
      },
      {
        "number": "56",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "57",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "58",
        "name": "PF7",
        "type": "bidirectional",
        "description": "GPIO port F bit 7, also open-drain I2C2SDA and T3CCP1."
      },
      {
        "number": "59",
        "name": "PG3",
        "type": "bidirectional",
        "description": "GPIO port G bit 3, also open-drain I2C4SDA and T5CCP1."
      },
      {
        "number": "60",
        "name": "PG2",
        "type": "bidirectional",
        "description": "GPIO port G bit 2, also open-drain I2C4SCL and T5CCP0."
      },
      {
        "number": "61",
        "name": "PG1",
        "type": "bidirectional",
        "description": "GPIO port G bit 1, also open-drain I2C3SDA and T4CCP1."
      },
      {
        "number": "62",
        "name": "PG0",
        "type": "bidirectional",
        "description": "GPIO port G bit 0, also open-drain I2C3SCL and T4CCP0."
      },
      {
        "number": "63",
        "name": "RST",
        "type": "input",
        "description": "System reset input (TTL levels)."
      },
      {
        "number": "64",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "65",
        "name": "OSC0",
        "type": "input",
        "description": "Main oscillator crystal input or an external clock reference input (analog)."
      },
      {
        "number": "66",
        "name": "OSC1",
        "type": "output",
        "description": "Main oscillator crystal output; leave unconnected when using a single-ended clock source."
      },
      {
        "number": "67",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "68",
        "name": "PJ0",
        "type": "bidirectional",
        "description": "GPIO port J bit 0, not 5-V tolerant; also T1CCP0, UART4 receive (U4Rx), and USB0 D- differential data pin (USB0DM)."
      },
      {
        "number": "69",
        "name": "PJ1",
        "type": "bidirectional",
        "description": "GPIO port J bit 1, not 5-V tolerant; also T1CCP1, UART4 transmit (U4Tx), and USB0 D+ differential data pin (USB0DP)."
      },
      {
        "number": "70",
        "name": "PB0",
        "type": "bidirectional",
        "description": "GPIO port B bit 0, not 5-V tolerant; also T2CCP0, UART1 receive (U1Rx), and USB0ID (analog input sensing the USB ID state)."
      },
      {
        "number": "71",
        "name": "PB1",
        "type": "bidirectional",
        "description": "GPIO port B bit 1, not 5-V tolerant; also T2CCP1, UART1 transmit (U1Tx), and USB0VBUS (analog I/O used in session request protocol)."
      },
      {
        "number": "72",
        "name": "PB2",
        "type": "bidirectional",
        "description": "GPIO port B bit 2, also open-drain I2C0SCL and T3CCP0."
      },
      {
        "number": "73",
        "name": "PB3",
        "type": "bidirectional",
        "description": "GPIO port B bit 3, also open-drain I2C0SDA and T3CCP1."
      },
      {
        "number": "74",
        "name": "PG4",
        "type": "bidirectional",
        "description": "GPIO port G bit 4, also open-drain I2C1SCL, UART2 receive (U2Rx), USB0EPEN, and WT0CCP0."
      },
      {
        "number": "75",
        "name": "PG5",
        "type": "bidirectional",
        "description": "GPIO port G bit 5, also open-drain I2C1SDA, UART2 transmit (U2Tx), USB0PFLT, and WT0CCP1."
      },
      {
        "number": "76",
        "name": "PH7",
        "type": "bidirectional",
        "description": "GPIO port H bit 7, also SSI2 transmit (SSI2Tx) and WT4CCP1."
      },
      {
        "number": "77",
        "name": "PH6",
        "type": "bidirectional",
        "description": "GPIO port H bit 6, also SSI2 receive (SSI2Rx) and WT4CCP0."
      },
      {
        "number": "78",
        "name": "PH5",
        "type": "bidirectional",
        "description": "GPIO port H bit 5, also SSI2 frame signal (SSI2Fss) and WT3CCP1."
      },
      {
        "number": "79",
        "name": "PH4",
        "type": "bidirectional",
        "description": "GPIO port H bit 4, also SSI2 clock (SSI2Clk) and WT3CCP0."
      },
      {
        "number": "80",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "81",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "82",
        "name": "PC3",
        "type": "bidirectional",
        "description": "GPIO port C bit 3, default JTAG/SWD function (TDO and SWO output), also T5CCP1."
      },
      {
        "number": "83",
        "name": "PC2",
        "type": "bidirectional",
        "description": "GPIO port C bit 2, default JTAG TDI input, also T5CCP0."
      },
      {
        "number": "84",
        "name": "PC1",
        "type": "bidirectional",
        "description": "GPIO port C bit 1, default JTAG TMS/SWDIO function, also T4CCP1."
      },
      {
        "number": "85",
        "name": "PC0",
        "type": "bidirectional",
        "description": "GPIO port C bit 0, default JTAG/SWD clock (TCK/SWCLK) function, also T4CCP0."
      },
      {
        "number": "86",
        "name": "VDDC",
        "type": "power_in",
        "description": "Core logic supply at 1.2 V from the on-chip LDO; VDDC pins should only be connected to each other and an external capacitor as specified in Table 22-12."
      },
      {
        "number": "87",
        "name": "PG6",
        "type": "bidirectional",
        "description": "GPIO port G bit 6, also analog comparator 2 positive input C2+ (5-V tolerant), open-drain I2C5SCL, and WT1CCP0."
      },
      {
        "number": "88",
        "name": "PG7",
        "type": "bidirectional",
        "description": "GPIO port G bit 7, also analog comparator 2 negative input C2- (5-V tolerant), open-drain I2C5SDA, and WT1CCP1."
      },
      {
        "number": "89",
        "name": "PE6",
        "type": "bidirectional",
        "description": "GPIO port E bit 6, also ADC input AIN21 (not 5-V tolerant)."
      },
      {
        "number": "90",
        "name": "PE7",
        "type": "bidirectional",
        "description": "GPIO port E bit 7, also ADC input AIN20 (not 5-V tolerant) and UART1 Ring Indicator (U1RI)."
      },
      {
        "number": "91",
        "name": "PB5",
        "type": "bidirectional",
        "description": "GPIO port B bit 5, also ADC input AIN11 (not 5-V tolerant), CAN0Tx, SSI2Fss, and T1CCP1."
      },
      {
        "number": "92",
        "name": "PB4",
        "type": "bidirectional",
        "description": "GPIO port B bit 4, also ADC input AIN10 (not 5-V tolerant), CAN0Rx, SSI2Clk, and T1CCP0."
      },
      {
        "number": "93",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "94",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "95",
        "name": "PE4",
        "type": "bidirectional",
        "description": "GPIO port E bit 4, also ADC input AIN9 (not 5-V tolerant), CAN0Rx, open-drain I2C2SCL, and UART5 receive (U5Rx)."
      },
      {
        "number": "96",
        "name": "PE5",
        "type": "bidirectional",
        "description": "GPIO port E bit 5, also ADC input AIN8 (not 5-V tolerant), CAN0Tx, open-drain I2C2SDA, and UART5 transmit (U5Tx)."
      },
      {
        "number": "97",
        "name": "PD4",
        "type": "bidirectional",
        "description": "GPIO port D bit 4, also ADC input AIN7 (not 5-V tolerant), UART6 receive (U6Rx), and WT4CCP0."
      },
      {
        "number": "98",
        "name": "PD5",
        "type": "bidirectional",
        "description": "GPIO port D bit 5, also ADC input AIN6 (not 5-V tolerant), UART6 transmit (U6Tx), and WT4CCP1."
      },
      {
        "number": "99",
        "name": "PD6",
        "type": "bidirectional",
        "description": "GPIO port D bit 6, also ADC input AIN5 (not 5-V tolerant), UART2 receive (U2Rx), and WT5CCP0."
      },
      {
        "number": "100",
        "name": "PD7",
        "type": "bidirectional",
        "description": "GPIO port D bit 7, also ADC input AIN4 (not 5-V tolerant), NMI (non-maskable interrupt), UART2 transmit (U2Tx), and WT5CCP1; locked by default and requires commit control to reprogram."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: MPN TM4C1237H6PZI maps to the 100-pin LQFP package (PINCOUNT 0x2 and 'Package 100-pin LQFP' in Table; Pin names use the GPIO port name as printed in Table 21-2 (e.g. PD0); pins that are fixed-function (; Pin types are KiCad ERC classes mapped by judgment: all GPIO pins are bidirectional even when the da"
        ],
        "pages_sent": 97,
        "cost_usd": 0.4955,
        "at": "2026-10-11T23:38:22"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tm4c1237h6pz",
        "pages": 1310,
        "sha256": "3db610f4ef4d92dd",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 100,
        "described": 100,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tm4c1237h6pzi.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          16,
          16,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tm4c1237h6pzi-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          16,
          16,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "78fe3b57a57656de6978c9af0f0abf1f3f41b827d454ffc570ce3f34ae962c3e",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "LQFP-100(14x14)",
      "Category": "Embedded Processors & Controllers",
      "Pins": "100"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tm4c1237h6pzi"
  ],
  "discovery_pitch": "TM4C1237H6PZI (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tm4c1237h6pzi.kicad_sym",
    "tm4c1237h6pzi.kicad_mod",
    "tm4c1237h6pzi.glb",
    "tm4c1237h6pzi.step",
    "tm4c1237h6pzi.lbr",
    "docs/hero.png",
    "docs/tm4c1237h6pzi-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tm4c1237h6pzi-hero.glb",
    "tm4c1237h6pzi-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}