main
Ray Set visibility: public 1cea8cc
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606
{
  "schema_version": 1,
  "type": "component",
  "slug": "tm4c1232h6pmir",
  "title": "TM4C1232H6PMIR",
  "brief": "Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "single chip microcomputer-microcontroller",
    "tm4c1232h6pmir",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TM4C1232H6PMIR",
    "manufacturer": "Texas Instruments",
    "package": "LQFP-64(10x10)",
    "pin_count": 64,
    "category": "Single Chip Microcomputer/Microcontroller",
    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tm4c1232h6pm.pdf",
    "parts": {
      "symbol": "tm4c1232h6pmir.kicad_sym",
      "footprint": "tm4c1232h6pmir.kicad_mod",
      "model_3d": "tm4c1232h6pmir-hero.glb",
      "model_3d_plain": "tm4c1232h6pmir.glb",
      "model_3d_step": "tm4c1232h6pmir-etched.step",
      "model_3d_step_plain": "tm4c1232h6pmir.step",
      "lbr": "tm4c1232h6pmir.lbr"
    },
    "distributor_links": {
      "lcsc": "C3230860",
      "digikey": "TM4C1232H6PMIR-ND",
      "mouser": "595-TM4C1232H6PMIR"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T21:32:35Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "TM4C1232H6PMIR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TM4C1232H6PMIR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PB6",
        "type": "bidirectional",
        "description": "GPIO port B bit 6, with alternate functions I2C5SCL, SSI2Rx and T0CCP0."
      },
      {
        "number": "2",
        "name": "VDDA",
        "type": "power_in",
        "description": "Positive supply for the analog circuits (ADC, analog comparators), separated from VDD to reduce noise and required to meet Table 21-5 regardless of system implementation."
      },
      {
        "number": "3",
        "name": "GNDA",
        "type": "power_in",
        "description": "Ground reference for the analog circuits (ADC, analog comparators), separated from GND to minimize noise."
      },
      {
        "number": "4",
        "name": "PB7",
        "type": "bidirectional",
        "description": "GPIO port B bit 7, with alternate functions I2C5SDA, SSI2Tx and T0CCP1."
      },
      {
        "number": "5",
        "name": "PF4",
        "type": "bidirectional",
        "description": "GPIO port F bit 4, with alternate function T2CCP0."
      },
      {
        "number": "6",
        "name": "PE3",
        "type": "bidirectional",
        "description": "GPIO port E bit 3, with analog-to-digital converter input 0 (AIN0)."
      },
      {
        "number": "7",
        "name": "PE2",
        "type": "bidirectional",
        "description": "GPIO port E bit 2, with analog-to-digital converter input 1 (AIN1)."
      },
      {
        "number": "8",
        "name": "PE1",
        "type": "bidirectional",
        "description": "GPIO port E bit 1, with ADC input 2 (AIN2) and UART module 7 transmit (U7Tx)."
      },
      {
        "number": "9",
        "name": "PE0",
        "type": "bidirectional",
        "description": "GPIO port E bit 0, with ADC input 3 (AIN3) and UART module 7 receive (U7Rx)."
      },
      {
        "number": "10",
        "name": "PD7",
        "type": "bidirectional",
        "description": "GPIO port D bit 7, with NMI, U2Tx and WT5CCP1 alternate functions; locked by default and requires commit control to reprogram."
      },
      {
        "number": "11",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "13",
        "name": "PC7",
        "type": "bidirectional",
        "description": "GPIO port C bit 7, with analog comparator 0 negative input (C0-), U3Tx and WT1CCP1."
      },
      {
        "number": "14",
        "name": "PC6",
        "type": "bidirectional",
        "description": "GPIO port C bit 6, with analog comparator 0 positive input (C0+), U3Rx and WT1CCP0."
      },
      {
        "number": "15",
        "name": "PC5",
        "type": "bidirectional",
        "description": "GPIO port C bit 5, with C1+, U1CTS, U1Tx, U4Tx and WT0CCP1."
      },
      {
        "number": "16",
        "name": "PC4",
        "type": "bidirectional",
        "description": "GPIO port C bit 4, with C1-, U1RTS, U1Rx, U4Rx and WT0CCP0."
      },
      {
        "number": "17",
        "name": "PA0",
        "type": "bidirectional",
        "description": "GPIO port A bit 0, defaults to UART module 0 receive (U0Rx)."
      },
      {
        "number": "18",
        "name": "PA1",
        "type": "bidirectional",
        "description": "GPIO port A bit 1, defaults to UART module 0 transmit (U0Tx)."
      },
      {
        "number": "19",
        "name": "PA2",
        "type": "bidirectional",
        "description": "GPIO port A bit 2, defaults to SSI module 0 clock (SSI0Clk)."
      },
      {
        "number": "20",
        "name": "PA3",
        "type": "bidirectional",
        "description": "GPIO port A bit 3, defaults to SSI module 0 frame signal (SSI0Fss)."
      },
      {
        "number": "21",
        "name": "PA4",
        "type": "bidirectional",
        "description": "GPIO port A bit 4, defaults to SSI module 0 receive (SSI0Rx)."
      },
      {
        "number": "22",
        "name": "PA5",
        "type": "bidirectional",
        "description": "GPIO port A bit 5, defaults to SSI module 0 transmit (SSI0Tx)."
      },
      {
        "number": "23",
        "name": "PA6",
        "type": "bidirectional",
        "description": "GPIO port A bit 6, with I2C module 1 clock (I2C1SCL), which has an active pull-up and should not be configured as open drain."
      },
      {
        "number": "24",
        "name": "PA7",
        "type": "bidirectional",
        "description": "GPIO port A bit 7, with I2C module 1 data (I2C1SDA)."
      },
      {
        "number": "25",
        "name": "VDDC",
        "type": "power_out",
        "description": "1.2 V logic supply from the on-chip LDO; connect VDDC pins only to each other and an external capacitor as specified in Table 21-12."
      },
      {
        "number": "26",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "27",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "28",
        "name": "PF0",
        "type": "bidirectional",
        "description": "GPIO port F bit 0, with C0o, CAN0Rx, NMI, SSI1Rx, T0CCP0 and U1RTS; locked by default and requires commit control to reprogram."
      },
      {
        "number": "29",
        "name": "PF1",
        "type": "bidirectional",
        "description": "GPIO port F bit 1, with C1o, SSI1Tx, T0CCP1, TRD1 and U1CTS."
      },
      {
        "number": "30",
        "name": "PF2",
        "type": "bidirectional",
        "description": "GPIO port F bit 2, with SSI1Clk, T1CCP0 and TRD0."
      },
      {
        "number": "31",
        "name": "PF3",
        "type": "bidirectional",
        "description": "GPIO port F bit 3, with CAN0Tx, SSI1Fss, T1CCP1 and TRCLK."
      },
      {
        "number": "32",
        "name": "PG5",
        "type": "bidirectional",
        "description": "GPIO port G bit 5, with I2C1SDA, U2Tx and WT0CCP1."
      },
      {
        "number": "33",
        "name": "PG4",
        "type": "bidirectional",
        "description": "GPIO port G bit 4, with I2C1SCL (active pull-up, not open drain), U2Rx and WT0CCP0."
      },
      {
        "number": "34",
        "name": "PG3",
        "type": "bidirectional",
        "description": "GPIO port G bit 3, with I2C4SDA and T5CCP1."
      },
      {
        "number": "35",
        "name": "PG2",
        "type": "bidirectional",
        "description": "GPIO port G bit 2, with I2C4SCL (active pull-up, not open drain) and T5CCP0."
      },
      {
        "number": "36",
        "name": "PG1",
        "type": "bidirectional",
        "description": "GPIO port G bit 1, with I2C3SDA and T4CCP1."
      },
      {
        "number": "37",
        "name": "PG0",
        "type": "bidirectional",
        "description": "GPIO port G bit 0, with I2C3SCL (active pull-up, not open drain) and T4CCP0."
      },
      {
        "number": "38",
        "name": "RST",
        "type": "input",
        "description": "System reset input with TTL-compatible levels."
      },
      {
        "number": "39",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "40",
        "name": "OSC0",
        "type": "input",
        "description": "Main oscillator crystal input or an external clock reference input."
      },
      {
        "number": "41",
        "name": "OSC1",
        "type": "output",
        "description": "Main oscillator crystal output; leave unconnected when using a single-ended clock source."
      },
      {
        "number": "42",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "43",
        "name": "PD4",
        "type": "bidirectional",
        "description": "GPIO port D bit 4, not 5-V tolerant, with U6Rx, USB0DM (USB D-) and WT4CCP0."
      },
      {
        "number": "44",
        "name": "PD5",
        "type": "bidirectional",
        "description": "GPIO port D bit 5, not 5-V tolerant, with U6Tx, USB0DP (USB D+) and WT4CCP1."
      },
      {
        "number": "45",
        "name": "PB0",
        "type": "bidirectional",
        "description": "GPIO port B bit 0, not 5-V tolerant, with T2CCP0 and U1Rx."
      },
      {
        "number": "46",
        "name": "PB1",
        "type": "bidirectional",
        "description": "GPIO port B bit 1, not 5-V tolerant, with T2CCP1 and U1Tx."
      },
      {
        "number": "47",
        "name": "PB2",
        "type": "bidirectional",
        "description": "GPIO port B bit 2, with I2C0SCL (active pull-up, not open drain) and T3CCP0."
      },
      {
        "number": "48",
        "name": "PB3",
        "type": "bidirectional",
        "description": "GPIO port B bit 3, with I2C0SDA and T3CCP1."
      },
      {
        "number": "49",
        "name": "PC3",
        "type": "bidirectional",
        "description": "GPIO port C bit 3, defaults to JTAG TDO and SWO, with T5CCP1."
      },
      {
        "number": "50",
        "name": "PC2",
        "type": "bidirectional",
        "description": "GPIO port C bit 2, defaults to JTAG TDI, with T5CCP0."
      },
      {
        "number": "51",
        "name": "PC1",
        "type": "bidirectional",
        "description": "GPIO port C bit 1, defaults to JTAG TMS and SWDIO, with T4CCP1."
      },
      {
        "number": "52",
        "name": "PC0",
        "type": "bidirectional",
        "description": "GPIO port C bit 0, defaults to JTAG/SWD clock (TCK/SWCLK), with T4CCP0."
      },
      {
        "number": "53",
        "name": "PD6",
        "type": "bidirectional",
        "description": "GPIO port D bit 6, with U2Rx and WT5CCP0."
      },
      {
        "number": "54",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for I/O and some logic."
      },
      {
        "number": "55",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "56",
        "name": "VDDC",
        "type": "power_out",
        "description": "1.2 V logic supply from the on-chip LDO; connect VDDC pins only to each other and an external capacitor as specified in Table 21-12."
      },
      {
        "number": "57",
        "name": "PB5",
        "type": "bidirectional",
        "description": "GPIO port B bit 5, with AIN11, CAN0Tx, SSI2Fss and T1CCP1."
      },
      {
        "number": "58",
        "name": "PB4",
        "type": "bidirectional",
        "description": "GPIO port B bit 4, with AIN10, CAN0Rx, SSI2Clk and T1CCP0."
      },
      {
        "number": "59",
        "name": "PE4",
        "type": "bidirectional",
        "description": "GPIO port E bit 4, with AIN9, CAN0Rx, I2C2SCL (active pull-up, not open drain) and U5Rx."
      },
      {
        "number": "60",
        "name": "PE5",
        "type": "bidirectional",
        "description": "GPIO port E bit 5, with AIN8, CAN0Tx, I2C2SDA and U5Tx."
      },
      {
        "number": "61",
        "name": "PD0",
        "type": "bidirectional",
        "description": "GPIO port D bit 0, with AIN7, I2C3SCL (active pull-up, not open drain), SSI1Clk, SSI3Clk and WT2CCP0."
      },
      {
        "number": "62",
        "name": "PD1",
        "type": "bidirectional",
        "description": "GPIO port D bit 1, with AIN6, I2C3SDA, SSI1Fss, SSI3Fss and WT2CCP1."
      },
      {
        "number": "63",
        "name": "PD2",
        "type": "bidirectional",
        "description": "GPIO port D bit 2, with AIN5, SSI1Rx, SSI3Rx and WT3CCP0."
      },
      {
        "number": "64",
        "name": "PD3",
        "type": "bidirectional",
        "description": "GPIO port D bit 3, with AIN4, SSI1Tx, SSI3Tx and WT3CCP1."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: VDDC pins are the 1.2 V output of the on-chip LDO that connect only to each other and an external ca; The datasheet pin diagram (Figure 19-1) is an image, so pin numbers come from the text Table 20-2. T"
        ],
        "pages_sent": 101,
        "cost_usd": 0.8936,
        "at": "2026-11-13T21:32:22"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tm4c1232h6pm.pdf",
        "pages": 1174,
        "sha256": "974bb6359135a2ea",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 64,
        "described": 64,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tm4c1232h6pmir.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          12,
          12,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tm4c1232h6pmir-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          12,
          12,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f732f486365898db6170269da9a9a468e34e73a52de5909a0ddd2f9012ec3823",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PM (LQFP-64, PM0064A)",
      "source_page": 1171,
      "D": {
        "nom_mm": 10,
        "range_mm": [
          9.8,
          10.2
        ]
      },
      "E1": {
        "nom_mm": 10,
        "range_mm": [
          9.8,
          10.2
        ]
      },
      "E": {
        "nom_mm": 12,
        "range_mm": [
          11.8,
          12.2
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.6,
        "range_mm": [
          null,
          1.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tm4c1232h6pmir.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "LQFP-64(10x10)",
      "Category": "Single Chip Microcomputer/Microcontroller",
      "Pins": "64"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tm4c1232h6pmir"
  ],
  "discovery_pitch": "TM4C1232H6PMIR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tm4c1232h6pmir.kicad_sym",
    "tm4c1232h6pmir.kicad_mod",
    "tm4c1232h6pmir.glb",
    "tm4c1232h6pmir.step",
    "tm4c1232h6pmir.lbr",
    "docs/hero.png",
    "docs/tm4c1232h6pmir-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tm4c1232h6pmir-hero.glb",
    "tm4c1232h6pmir-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}