main
History Download
Ray Publish 0.1.0 d6ef84e

TM4C1231E6PZI

Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)

TM4C1231E6PZI from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PD0 bidirectional GPIO port D bit 0 (TTL), also AIN15 analog input, I2C3SCL (open-drain, active pull-up), SSI1Clk, SSI3Clk, and WT2CCP0.
2 PD1 bidirectional GPIO port D bit 1 (TTL), also AIN14 analog input, I2C3SDA (open-drain), SSI1Fss, SSI3Fss, and WT2CCP1.
3 PD2 bidirectional GPIO port D bit 2 (TTL), also AIN13 analog input, SSI1Rx, SSI3Rx, and WT3CCP0.
4 PD3 bidirectional GPIO port D bit 3 (TTL), also AIN12 analog input, SSI1Tx, SSI3Tx, and WT3CCP1.
5 VDD power_in Positive supply for I/O and some logic.
6 GND power_in Ground reference for logic and I/O pins.
7 VDDA power_in Positive supply for the analog circuits (ADC, analog comparators); must meet the Table 21-5 specification regardless of system implementation and be powered before VDD if from a different supply.
8 VREFA+ input ADC reference voltage defining the full-scale (4095) input; limited to the range in Table 21-32 and not 5-V tolerant.
9 VREFA- input ADC reference voltage defining the zero-scale (0) input; limited to the range in Table 21-32 and not 5-V tolerant.
10 GNDA power_in Ground reference for the analog circuits (ADC, analog comparators), kept separate from GND to reduce noise.
11 PJ2 bidirectional GPIO port J bit 2 (TTL), also T2CCP0 timer capture/compare/PWM 0 and U5Rx UART 5 receive.
12 PE3 bidirectional GPIO port E bit 3 (TTL), also analog-to-digital converter input AIN0.
13 PE2 bidirectional GPIO port E bit 2 (TTL), also analog-to-digital converter input AIN1.
14 PE1 bidirectional GPIO port E bit 1 (TTL), also analog-to-digital converter input AIN2 and U7Tx UART 7 transmit.
15 PE0 bidirectional GPIO port E bit 0 (TTL), also analog-to-digital converter input AIN3 and U7Rx UART 7 receive.
16 PH0 bidirectional GPIO port H bit 0 (TTL), also analog-to-digital converter input AIN16, SSI3Clk, and WT2CCP0.
17 PH1 bidirectional GPIO port H bit 1 (TTL), also analog-to-digital converter input AIN17, SSI3Fss, and WT2CCP1.
18 PH2 bidirectional GPIO port H bit 2 (TTL), also analog-to-digital converter input AIN18, SSI3Rx, and WT5CCP0.
19 PH3 bidirectional GPIO port H bit 3 (TTL), also analog-to-digital converter input AIN19, SSI3Tx, and WT5CCP1.
20 VDD power_in Positive supply for I/O and some logic.
21 GND power_in Ground reference for logic and I/O pins.
22 PC7 bidirectional GPIO port C bit 7 (TTL), also analog comparator 0 negative input C0-, U3Tx UART 3 transmit, and WT1CCP1.
23 PC6 bidirectional GPIO port C bit 6 (TTL), also analog comparator 0 positive input C0+, U3Rx UART 3 receive, and WT1CCP0.
24 PC5 bidirectional GPIO port C bit 5 (TTL), also analog comparator 1 positive input C1+, U1CTS, U1Tx, U4Tx, and WT0CCP1.
25 PC4 bidirectional GPIO port C bit 4 (TTL), also analog comparator 1 negative input C1-, U1RTS, U1Rx, U4Rx, and WT0CCP0.
26 PA0 bidirectional GPIO port A bit 0 (TTL), default function U0Rx UART 0 receive.
27 PA1 bidirectional GPIO port A bit 1 (TTL), default function U0Tx UART 0 transmit.
28 PA2 bidirectional GPIO port A bit 2 (TTL), default function SSI0Clk SSI module 0 clock.
29 PA3 bidirectional GPIO port A bit 3 (TTL), default function SSI0Fss SSI module 0 frame signal.
30 PA4 bidirectional GPIO port A bit 4 (TTL), default function SSI0Rx SSI module 0 receive.
31 PA5 bidirectional GPIO port A bit 5 (TTL), default function SSI0Tx SSI module 0 transmit.
32 VDD power_in Positive supply for I/O and some logic.
33 GND power_in Ground reference for logic and I/O pins.
34 PA6 bidirectional GPIO port A bit 6 (TTL), also I2C1SCL (open-drain, active pull-up; port pin should not be configured as open drain).
35 PA7 bidirectional GPIO port A bit 7 (TTL), also I2C1SDA (open-drain).
36 PF6 bidirectional GPIO port F bit 6 (TTL), also I2C2SCL (open-drain, active pull-up) and T3CCP0.
37 PF5 bidirectional GPIO port F bit 5 (TTL), also T2CCP1 16/32-bit timer 2 capture/compare/PWM 1.
38 VDDC power_in Core supply at 1.2 V from the on-chip LDO; connect only to the other VDDC pins and the external capacitor specified in Table 21-12.
39 PF4 bidirectional GPIO port F bit 4 (TTL), also T2CCP0, TRD3 trace data 3, and U1DTR modem Data Terminal Ready.
40 PF0 bidirectional GPIO port F bit 0 (TTL), locked special-consideration pin also serving as NMI, C0o comparator 0 output, CAN0Rx, SSI1Rx, T0CCP0, TRD2, and U1RTS.
41 PF1 bidirectional GPIO port F bit 1 (TTL), also C1o comparator 1 output, SSI1Tx, T0CCP1, TRD1, and U1CTS.
42 PF2 bidirectional GPIO port F bit 2 (TTL), also C2o comparator 2 output, SSI1Clk, T1CCP0, TRD0, and U1DCD.
43 PF3 bidirectional GPIO port F bit 3 (TTL), also CAN0Tx, SSI1Fss, T1CCP1, TRCLK trace clock, and U1DSR.
44 VDD power_in Positive supply for I/O and some logic.
45 GND power_in Ground reference for logic and I/O pins.
46 PK3 bidirectional GPIO port K bit 3 (TTL), also SSI3Tx SSI module 3 transmit.
47 PK2 bidirectional GPIO port K bit 2 (TTL), also SSI3Rx SSI module 3 receive.
48 PK1 bidirectional GPIO port K bit 1 (TTL), also SSI3Fss SSI module 3 frame signal.
49 PK0 bidirectional GPIO port K bit 0 (TTL), also SSI3Clk SSI module 3 clock.
50 WAKE input External input (TTL) that brings the processor out of Hibernate mode when asserted.
51 HIB output TTL output that indicates the processor is in Hibernate mode.
52 XOSC0 input Hibernation oscillator crystal input or external clock reference; a 32.768-kHz crystal or oscillator for the Hibernation RTC.
53 GNDX power_in Ground for the Hibernation oscillator; connect to digital ground with the crystal load capacitors, or to digital ground with an external oscillator.
54 XOSC1 output Hibernation oscillator crystal output; leave unconnected when using a single-ended clock source.
55 VBAT power_in Power source for the Hibernation module, normally connected to the positive terminal of a battery as backup supply; absolute maximum 4 V.
56 VDD power_in Positive supply for I/O and some logic.
57 GND power_in Ground reference for logic and I/O pins.
58 PF7 bidirectional GPIO port F bit 7 (TTL), also I2C2SDA (open-drain) and T3CCP1.
59 PG3 bidirectional GPIO port G bit 3 (TTL), also I2C4SDA (open-drain) and T5CCP1.
60 PG2 bidirectional GPIO port G bit 2 (TTL), also I2C4SCL (open-drain, active pull-up) and T5CCP0.
61 PG1 bidirectional GPIO port G bit 1 (TTL), also I2C3SDA (open-drain) and T4CCP1.
62 PG0 bidirectional GPIO port G bit 0 (TTL), also I2C3SCL (open-drain, active pull-up) and T4CCP0.
63 RST input System reset input (TTL); pull up as shown in Figure 5-1 or tie to VDD per the unused-signal guidance.
64 GND power_in Ground reference for logic and I/O pins.
65 OSC0 input Main oscillator crystal input or external clock reference input (analog); leave OSC1 unconnected when using a single-ended clock.
66 OSC1 output Main oscillator crystal output (analog); leave unconnected when using a single-ended clock source.
67 VDD power_in Positive supply for I/O and some logic.
68 PJ0 bidirectional GPIO port J bit 0 (TTL), not 5-V tolerant (VIN limit VDD+0.3 V when configured as GPIO), also T1CCP0 and U4Rx.
69 PJ1 bidirectional GPIO port J bit 1 (TTL), not 5-V tolerant (VIN limit VDD+0.3 V when configured as GPIO), also T1CCP1 and U4Tx.
70 PB0 bidirectional GPIO port B bit 0 (TTL), not 5-V tolerant (VIN limit VDD+0.3 V when configured as GPIO), also T2CCP0 and U1Rx.
71 PB1 bidirectional GPIO port B bit 1 (TTL), not 5-V tolerant (VIN limit VDD+0.3 V when configured as GPIO), also T2CCP1 and U1Tx.
72 PB2 bidirectional GPIO port B bit 2 (TTL), also I2C0SCL (open-drain, active pull-up) and T3CCP0.
73 PB3 bidirectional GPIO port B bit 3 (TTL), also I2C0SDA (open-drain) and T3CCP1.
74 PG4 bidirectional GPIO port G bit 4 (TTL), also I2C1SCL (open-drain, active pull-up), U2Rx, and WT0CCP0.
75 PG5 bidirectional GPIO port G bit 5 (TTL), also I2C1SDA (open-drain), U2Tx, and WT0CCP1.
76 PH7 bidirectional GPIO port H bit 7 (TTL), also SSI2Tx, and WT4CCP1.
77 PH6 bidirectional GPIO port H bit 6 (TTL), also SSI2Rx, and WT4CCP0.
78 PH5 bidirectional GPIO port H bit 5 (TTL), also SSI2Fss and WT3CCP1.
79 PH4 bidirectional GPIO port H bit 4 (TTL), also SSI2Clk and WT3CCP0.
80 VDD power_in Positive supply for I/O and some logic.
81 GND power_in Ground reference for logic and I/O pins.
82 PC3 bidirectional GPIO port C bit 3 (TTL), default function SWO/TDO JTAG-SWD output, also T5CCP1.
83 PC2 bidirectional GPIO port C bit 2 (TTL), default function TDI JTAG input, also T5CCP0.
84 PC1 bidirectional GPIO port C bit 1 (TTL), default function SWDIO/TMS JTAG-SWD input/output, also T4CCP1.
85 PC0 bidirectional GPIO port C bit 0 (TTL), default function SWCLK/TCK JTAG-SWD clock input, also T4CCP0.
86 VDDC power_in Core supply at 1.2 V from the on-chip LDO; connect only to the other VDDC pins and the external capacitor specified in Table 21-12.
87 PG6 bidirectional GPIO port G bit 6 (TTL), also analog comparator 2 positive input C2+, I2C5SCL (open-drain, active pull-up), and WT1CCP0.
88 PG7 bidirectional GPIO port G bit 7 (TTL), also analog comparator 2 negative input C2-, I2C5SDA (open-drain), and WT1CCP1.
89 PE6 bidirectional GPIO port E bit 6 (TTL), also analog-to-digital converter input AIN21.
90 PE7 bidirectional GPIO port E bit 7 (TTL), also analog-to-digital converter input AIN20 and U1RI UART 1 Ring Indicator input.
91 PB5 bidirectional GPIO port B bit 5 (TTL), also analog-to-digital converter input AIN11, CAN0Tx, SSI2Fss, and T1CCP1.
92 PB4 bidirectional GPIO port B bit 4 (TTL), also analog-to-digital converter input AIN10, CAN0Rx, SSI2Clk, and T1CCP0.
93 VDD power_in Positive supply for I/O and some logic.
94 GND power_in Ground reference for logic and I/O pins.
95 PE4 bidirectional GPIO port E bit 4 (TTL), also analog-to-digital converter input AIN9, CAN0Rx, I2C2SCL (open-drain, active pull-up), and U5Rx.
96 PE5 bidirectional GPIO port E bit 5 (TTL), also analog-to-digital converter input AIN8, CAN0Tx, I2C2SDA (open-drain), and U5Tx.
97 PD4 bidirectional GPIO port D bit 4 (TTL), also analog-to-digital converter input AIN7, U6Rx, and WT4CCP0.
98 PD5 bidirectional GPIO port D bit 5 (TTL), also analog-to-digital converter input AIN6, U6Tx, and WT4CCP1.
99 PD6 bidirectional GPIO port D bit 6 (TTL), also analog-to-digital converter input AIN5, U2Rx, and WT5CCP0.
100 PD7 bidirectional GPIO port D bit 7 (TTL), locked special-consideration pin also serving as NMI, analog-to-digital converter input AIN4, U2Tx, and WT5CCP1.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient operating temperature range (industrial) -40 85 °C Ambient temperature, Industrial grade, as stated in the feature overview; the Recommended Operating Conditions table is not in the excerpt 40

CAD (KiCad official)

  • Symbol: TM4C1231E6PZI
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: tm4c1231e6pzi-etched.step / tm4c1231e6pzi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm4c1231e6pzi.step / tm4c1231e6pzi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (1176 pp, sha256 c3a17ec1d7a56667, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF