component
TM4C1231D5PMIR
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
b51987d
TM4C1231D5PMIR
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
TM4C1231D5PMIR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB6 | bidirectional | GPIO port B bit 6 with TTL-compatible levels; alternate functions are SSI2Rx (SSI module 2 receive) and T0CCP0 (16/32-bit Timer 0 Capture/Compare/PWM 0). |
| 2 | VDDA | power_in | Positive supply for the analog circuits (ADC, analog comparators); must be supplied within the Table 21-5 voltage specification regardless of system implementation. |
| 3 | GNDA | power_in | Ground reference for the analog circuits (ADC, analog comparators), separated from GND to reduce digital noise coupling. |
| 4 | PB7 | bidirectional | GPIO port B bit 7 with TTL-compatible levels; alternate functions are SSI2Tx (SSI module 2 transmit) and T0CCP1 (16/32-bit Timer 0 Capture/Compare/PWM 1). |
| 5 | PF4 | bidirectional | GPIO port F bit 4 with TTL-compatible levels; alternate function is T2CCP0 (16/32-bit Timer 2 Capture/Compare/PWM 0). |
| 6 | PE3 | bidirectional | GPIO port E bit 3; analog input AIN0 for the ADC, which is not 5-V tolerant and passes through an isolation circuit. |
| 7 | PE2 | bidirectional | GPIO port E bit 2; analog input AIN1 for the ADC, which is not 5-V tolerant and passes through an isolation circuit. |
| 8 | PE1 | bidirectional | GPIO port E bit 1; analog input AIN2 for the ADC (not 5-V tolerant) and alternate function U7Tx (UART module 7 transmit). |
| 9 | PE0 | bidirectional | GPIO port E bit 0; analog input AIN3 for the ADC (not 5-V tolerant) and alternate function U7Rx (UART module 7 receive). |
| 10 | PD7 | bidirectional | GPIO port D bit 7 with TTL-compatible levels; also NMI (non-maskable interrupt), U2Tx (UART 2 transmit) and WT5CCP1 (32/64-bit Wide Timer 5 Capture/Compare/PWM 1); locked and requires commit control to reprogram. |
| 11 | VDD | power_in | Positive supply for I/O and some logic. |
| 12 | GND | power_in | Ground reference for logic and I/O pins. |
| 13 | PC7 | bidirectional | GPIO port C bit 7 with TTL-compatible levels; alternate functions are C0- (analog comparator 0 negative input), U3Tx (UART 3 transmit) and WT1CCP1 (Wide Timer 1 CCP 1). |
| 14 | PC6 | bidirectional | GPIO port C bit 6 with TTL-compatible levels; alternate functions are C0+ (analog comparator 0 positive input), U3Rx (UART 3 receive) and WT1CCP0 (Wide Timer 1 CCP 0). |
| 15 | PC5 | bidirectional | GPIO port C bit 5 with TTL-compatible levels; alternate functions are C1+ (analog comparator 1 positive input), U1CTS, U1Tx, U4Tx and WT0CCP1. |
| 16 | PC4 | bidirectional | GPIO port C bit 4 with TTL-compatible levels; alternate functions are C1- (analog comparator 1 negative input), U1RTS, U1Rx, U4Rx and WT0CCP0. |
| 17 | PA0 | bidirectional | GPIO port A bit 0 with TTL-compatible levels; alternate function U0Rx (UART 0 receive, default function after reset). |
| 18 | PA1 | bidirectional | GPIO port A bit 1 with TTL-compatible levels; alternate function U0Tx (UART 0 transmit, default function after reset). |
| 19 | PA2 | bidirectional | GPIO port A bit 2 with TTL-compatible levels; alternate function SSI0Clk (SSI module 0 clock, default function after reset). |
| 20 | PA3 | bidirectional | GPIO port A bit 3 with TTL-compatible levels; alternate function SSI0Fss (SSI module 0 frame signal, default function after reset). |
| 21 | PA4 | bidirectional | GPIO port A bit 4 with TTL-compatible levels; alternate function SSI0Rx (SSI module 0 receive, default function after reset). |
| 22 | PA5 | bidirectional | GPIO port A bit 5 with TTL-compatible levels; alternate function SSI0Tx (SSI module 0 transmit, default function after reset). |
| 23 | PA6 | bidirectional | GPIO port A bit 6; alternate function I2C1SCL (I2C module 1 clock, open-drain with active pull-up, so the port pin should not be configured as open drain). |
| 24 | PA7 | bidirectional | GPIO port A bit 7 with TTL-compatible levels; alternate function I2C1SDA (I2C module 1 data, open-drain, must be set open drain via GPIOODR). |
| 25 | VDDC | power_in | On-chip LDO output supplying 1.2 V to the core and most peripherals; connect only to the other VDDC pins and the external capacitor specified in Table 21-12. |
| 26 | VDD | power_in | Positive supply for I/O and some logic. |
| 27 | GND | power_in | Ground reference for logic and I/O pins. |
| 28 | PF0 | bidirectional | GPIO port F bit 0 (default GPIO, locked and requires commit control); alternate functions include C0o (comparator 0 output), CAN0Rx, NMI, SSI1Rx, T0CCP0, U1RTS. |
| 29 | PF1 | bidirectional | GPIO port F bit 1 with TTL-compatible levels; alternate functions include C1o (comparator 1 output), SSI1Tx, T0CCP1, TRD1 (trace data 1), and U1CTS. |
| 30 | PF2 | bidirectional | GPIO port F bit 2 with TTL-compatible levels; alternate functions include SSI1Clk, T1CCP0 (Timer 1 CCP 0) and TRD0 (trace data 0). |
| 31 | PF3 | bidirectional | GPIO port F bit 3 with TTL-compatible levels; alternate functions include CAN0Tx, SSI1Fss, T1CCP1 (Timer 1 CCP 1) and TRCLK (trace clock). |
| 32 | WAKE | input | External TTL input that brings the processor out of Hibernate mode when asserted. |
| 33 | HIB | output | TTL output that indicates the processor is in Hibernate mode. |
| 34 | XOSC0 | input | Hibernation module oscillator crystal input or external clock reference input (32.768 kHz crystal or oscillator for the Hibernation RTC); analog pin. |
| 35 | GNDX | power_in | Ground for the Hibernation oscillator; connect to digital ground along with the crystal load capacitors (crystal) or to digital ground (external oscillator). |
| 36 | XOSC1 | output | Hibernation module oscillator crystal output; leave unconnected when using a single-ended clock source. |
| 37 | VBAT | power_in | Power source for the Hibernation module, normally connected to the positive terminal of a battery as battery backup supply. |
| 38 | RST | input | System reset input (TTL-compatible). |
| 39 | GND | power_in | Ground reference for logic and I/O pins. |
| 40 | OSC0 | input | Main oscillator crystal input or external clock reference input; analog pin. |
| 41 | OSC1 | output | Main oscillator crystal output; leave unconnected when using a single-ended clock source. |
| 42 | VDD | power_in | Positive supply for I/O and some logic. |
| 43 | PD4 | bidirectional | GPIO port D bit 4; this pin is not 5-V tolerant. Alternate functions are U6Rx (UART 6 receive) and WT4CCP0. |
| 44 | PD5 | bidirectional | GPIO port D bit 5; this pin is not 5-V tolerant. Alternate functions are U6Tx (UART 6 transmit) and WT4CCP1. |
| 45 | PB0 | bidirectional | GPIO port B bit 0; this pin is not 5-V tolerant. Alternate functions are T2CCP0 and U1Rx (UART 1 receive). |
| 46 | PB1 | bidirectional | GPIO port B bit 1; this pin is not 5-V tolerant. Alternate functions are T2CCP1 and U1Tx (UART 1 transmit). |
| 47 | PB2 | bidirectional | GPIO port B bit 2; alternate functions are I2C0SCL (I2C module 0 clock, open-drain with active pull-up) and T3CCP0. |
| 48 | PB3 | bidirectional | GPIO port B bit 3; alternate functions are I2C0SDA (I2C module 0 data, open-drain) and T3CCP1. |
| 49 | PC3 | bidirectional | GPIO port C bit 3 (JTAG/SWD default); alternate functions are SWO and TDO (JTAG TDO/SWO, output) and T5CCP1; commit control protected. |
| 50 | PC2 | bidirectional | GPIO port C bit 2 (JTAG default); alternate functions are TDI (JTAG TDI, input) and T5CCP0; commit control protected. |
| 51 | PC1 | bidirectional | GPIO port C bit 1 (JTAG/SWD default); alternate functions are SWDIO/TMS (JTAG TMS and SWDIO) and T4CCP1; commit control protected. |
| 52 | PC0 | bidirectional | GPIO port C bit 0 (JTAG/SWD default); alternate functions are SWCLK/TCK (JTAG/SWD clock input) and T4CCP0; commit control protected. |
| 53 | PD6 | bidirectional | GPIO port D bit 6 with TTL-compatible levels; alternate functions are U2Rx (UART 2 receive) and WT5CCP0. |
| 54 | VDD | power_in | Positive supply for I/O and some logic. |
| 55 | GND | power_in | Ground reference for logic and I/O pins. |
| 56 | VDDC | power_in | On-chip LDO output supplying 1.2 V to the core and most peripherals; connect only to the other VDDC pins and the external capacitor specified in Table 21-12. |
| 57 | PB5 | bidirectional | GPIO port B bit 5 with TTL-compatible levels; alternate functions are AIN11 (ADC input 11), CAN0Tx, SSI2Fss, and T1CCP1. |
| 58 | PB4 | bidirectional | GPIO port B bit 4 with TTL-compatible levels; alternate functions are AIN10 (ADC input 10), CAN0Rx, SSI2Clk, and T1CCP0. |
| 59 | PE4 | bidirectional | GPIO port E bit 4 with TTL-compatible levels; alternate functions are AIN9 (ADC input 9), CAN0Rx, I2C2SCL (open-drain with active pull-up), and U5Rx. |
| 60 | PE5 | bidirectional | GPIO port E bit 5 with TTL-compatible levels; alternate functions are AIN8 (ADC input 8), CAN0Tx, I2C2SDA (open-drain), and U5Tx. |
| 61 | PD0 | bidirectional | GPIO port D bit 0 with TTL-compatible levels; alternate functions are AIN7, SSI3Clk, SSI1Clk, I2C3SCL (open-drain with active pull-up), and WT2CCP0. |
| 62 | PD1 | bidirectional | GPIO port D bit 1 with TTL-compatible levels; alternate functions are AIN6, SSI3Fss, SSI1Fss, I2C3SDA (open-drain), and WT2CCP1. |
| 63 | PD2 | bidirectional | GPIO port D bit 2 with TTL-compatible levels; alternate functions are AIN5, SSI3Rx, SSI1Rx, and WT3CCP0. |
| 64 | PD3 | bidirectional | GPIO port D bit 3 with TTL-compatible levels; alternate functions are AIN4, SSI3Tx, SSI1Tx, and WT3CCP1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
CAD (KiCad official)
- Symbol:
TM4C1231D5PMIR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
tm4c1231d5pmir-etched.step/tm4c1231d5pmir-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm4c1231d5pmir.step/tm4c1231d5pmir.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (1149 pp, sha256
209599ee3de8e332, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TM4C1231D5PMIR
**Texas Instruments** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
TM4C1231D5PMIR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB6 | bidirectional | GPIO port B bit 6 with TTL-compatible levels; alternate functions are SSI2Rx (SSI module 2 receive) and T0CCP0 (16/32-bit Timer 0 Capture/Compare/PWM 0). |
| 2 | VDDA | power_in | Positive supply for the analog circuits (ADC, analog comparators); must be supplied within the Table 21-5 voltage specification regardless of system implementation. |
| 3 | GNDA | power_in | Ground reference for the analog circuits (ADC, analog comparators), separated from GND to reduce digital noise coupling. |
| 4 | PB7 | bidirectional | GPIO port B bit 7 with TTL-compatible levels; alternate functions are SSI2Tx (SSI module 2 transmit) and T0CCP1 (16/32-bit Timer 0 Capture/Compare/PWM 1). |
| 5 | PF4 | bidirectional | GPIO port F bit 4 with TTL-compatible levels; alternate function is T2CCP0 (16/32-bit Timer 2 Capture/Compare/PWM 0). |
| 6 | PE3 | bidirectional | GPIO port E bit 3; analog input AIN0 for the ADC, which is not 5-V tolerant and passes through an isolation circuit. |
| 7 | PE2 | bidirectional | GPIO port E bit 2; analog input AIN1 for the ADC, which is not 5-V tolerant and passes through an isolation circuit. |
| 8 | PE1 | bidirectional | GPIO port E bit 1; analog input AIN2 for the ADC (not 5-V tolerant) and alternate function U7Tx (UART module 7 transmit). |
| 9 | PE0 | bidirectional | GPIO port E bit 0; analog input AIN3 for the ADC (not 5-V tolerant) and alternate function U7Rx (UART module 7 receive). |
| 10 | PD7 | bidirectional | GPIO port D bit 7 with TTL-compatible levels; also NMI (non-maskable interrupt), U2Tx (UART 2 transmit) and WT5CCP1 (32/64-bit Wide Timer 5 Capture/Compare/PWM 1); locked and requires commit control to reprogram. |
| 11 | VDD | power_in | Positive supply for I/O and some logic. |
| 12 | GND | power_in | Ground reference for logic and I/O pins. |
| 13 | PC7 | bidirectional | GPIO port C bit 7 with TTL-compatible levels; alternate functions are C0- (analog comparator 0 negative input), U3Tx (UART 3 transmit) and WT1CCP1 (Wide Timer 1 CCP 1). |
| 14 | PC6 | bidirectional | GPIO port C bit 6 with TTL-compatible levels; alternate functions are C0+ (analog comparator 0 positive input), U3Rx (UART 3 receive) and WT1CCP0 (Wide Timer 1 CCP 0). |
| 15 | PC5 | bidirectional | GPIO port C bit 5 with TTL-compatible levels; alternate functions are C1+ (analog comparator 1 positive input), U1CTS, U1Tx, U4Tx and WT0CCP1. |
| 16 | PC4 | bidirectional | GPIO port C bit 4 with TTL-compatible levels; alternate functions are C1- (analog comparator 1 negative input), U1RTS, U1Rx, U4Rx and WT0CCP0. |
| 17 | PA0 | bidirectional | GPIO port A bit 0 with TTL-compatible levels; alternate function U0Rx (UART 0 receive, default function after reset). |
| 18 | PA1 | bidirectional | GPIO port A bit 1 with TTL-compatible levels; alternate function U0Tx (UART 0 transmit, default function after reset). |
| 19 | PA2 | bidirectional | GPIO port A bit 2 with TTL-compatible levels; alternate function SSI0Clk (SSI module 0 clock, default function after reset). |
| 20 | PA3 | bidirectional | GPIO port A bit 3 with TTL-compatible levels; alternate function SSI0Fss (SSI module 0 frame signal, default function after reset). |
| 21 | PA4 | bidirectional | GPIO port A bit 4 with TTL-compatible levels; alternate function SSI0Rx (SSI module 0 receive, default function after reset). |
| 22 | PA5 | bidirectional | GPIO port A bit 5 with TTL-compatible levels; alternate function SSI0Tx (SSI module 0 transmit, default function after reset). |
| 23 | PA6 | bidirectional | GPIO port A bit 6; alternate function I2C1SCL (I2C module 1 clock, open-drain with active pull-up, so the port pin should not be configured as open drain). |
| 24 | PA7 | bidirectional | GPIO port A bit 7 with TTL-compatible levels; alternate function I2C1SDA (I2C module 1 data, open-drain, must be set open drain via GPIOODR). |
| 25 | VDDC | power_in | On-chip LDO output supplying 1.2 V to the core and most peripherals; connect only to the other VDDC pins and the external capacitor specified in Table 21-12. |
| 26 | VDD | power_in | Positive supply for I/O and some logic. |
| 27 | GND | power_in | Ground reference for logic and I/O pins. |
| 28 | PF0 | bidirectional | GPIO port F bit 0 (default GPIO, locked and requires commit control); alternate functions include C0o (comparator 0 output), CAN0Rx, NMI, SSI1Rx, T0CCP0, U1RTS. |
| 29 | PF1 | bidirectional | GPIO port F bit 1 with TTL-compatible levels; alternate functions include C1o (comparator 1 output), SSI1Tx, T0CCP1, TRD1 (trace data 1), and U1CTS. |
| 30 | PF2 | bidirectional | GPIO port F bit 2 with TTL-compatible levels; alternate functions include SSI1Clk, T1CCP0 (Timer 1 CCP 0) and TRD0 (trace data 0). |
| 31 | PF3 | bidirectional | GPIO port F bit 3 with TTL-compatible levels; alternate functions include CAN0Tx, SSI1Fss, T1CCP1 (Timer 1 CCP 1) and TRCLK (trace clock). |
| 32 | WAKE | input | External TTL input that brings the processor out of Hibernate mode when asserted. |
| 33 | HIB | output | TTL output that indicates the processor is in Hibernate mode. |
| 34 | XOSC0 | input | Hibernation module oscillator crystal input or external clock reference input (32.768 kHz crystal or oscillator for the Hibernation RTC); analog pin. |
| 35 | GNDX | power_in | Ground for the Hibernation oscillator; connect to digital ground along with the crystal load capacitors (crystal) or to digital ground (external oscillator). |
| 36 | XOSC1 | output | Hibernation module oscillator crystal output; leave unconnected when using a single-ended clock source. |
| 37 | VBAT | power_in | Power source for the Hibernation module, normally connected to the positive terminal of a battery as battery backup supply. |
| 38 | RST | input | System reset input (TTL-compatible). |
| 39 | GND | power_in | Ground reference for logic and I/O pins. |
| 40 | OSC0 | input | Main oscillator crystal input or external clock reference input; analog pin. |
| 41 | OSC1 | output | Main oscillator crystal output; leave unconnected when using a single-ended clock source. |
| 42 | VDD | power_in | Positive supply for I/O and some logic. |
| 43 | PD4 | bidirectional | GPIO port D bit 4; this pin is not 5-V tolerant. Alternate functions are U6Rx (UART 6 receive) and WT4CCP0. |
| 44 | PD5 | bidirectional | GPIO port D bit 5; this pin is not 5-V tolerant. Alternate functions are U6Tx (UART 6 transmit) and WT4CCP1. |
| 45 | PB0 | bidirectional | GPIO port B bit 0; this pin is not 5-V tolerant. Alternate functions are T2CCP0 and U1Rx (UART 1 receive). |
| 46 | PB1 | bidirectional | GPIO port B bit 1; this pin is not 5-V tolerant. Alternate functions are T2CCP1 and U1Tx (UART 1 transmit). |
| 47 | PB2 | bidirectional | GPIO port B bit 2; alternate functions are I2C0SCL (I2C module 0 clock, open-drain with active pull-up) and T3CCP0. |
| 48 | PB3 | bidirectional | GPIO port B bit 3; alternate functions are I2C0SDA (I2C module 0 data, open-drain) and T3CCP1. |
| 49 | PC3 | bidirectional | GPIO port C bit 3 (JTAG/SWD default); alternate functions are SWO and TDO (JTAG TDO/SWO, output) and T5CCP1; commit control protected. |
| 50 | PC2 | bidirectional | GPIO port C bit 2 (JTAG default); alternate functions are TDI (JTAG TDI, input) and T5CCP0; commit control protected. |
| 51 | PC1 | bidirectional | GPIO port C bit 1 (JTAG/SWD default); alternate functions are SWDIO/TMS (JTAG TMS and SWDIO) and T4CCP1; commit control protected. |
| 52 | PC0 | bidirectional | GPIO port C bit 0 (JTAG/SWD default); alternate functions are SWCLK/TCK (JTAG/SWD clock input) and T4CCP0; commit control protected. |
| 53 | PD6 | bidirectional | GPIO port D bit 6 with TTL-compatible levels; alternate functions are U2Rx (UART 2 receive) and WT5CCP0. |
| 54 | VDD | power_in | Positive supply for I/O and some logic. |
| 55 | GND | power_in | Ground reference for logic and I/O pins. |
| 56 | VDDC | power_in | On-chip LDO output supplying 1.2 V to the core and most peripherals; connect only to the other VDDC pins and the external capacitor specified in Table 21-12. |
| 57 | PB5 | bidirectional | GPIO port B bit 5 with TTL-compatible levels; alternate functions are AIN11 (ADC input 11), CAN0Tx, SSI2Fss, and T1CCP1. |
| 58 | PB4 | bidirectional | GPIO port B bit 4 with TTL-compatible levels; alternate functions are AIN10 (ADC input 10), CAN0Rx, SSI2Clk, and T1CCP0. |
| 59 | PE4 | bidirectional | GPIO port E bit 4 with TTL-compatible levels; alternate functions are AIN9 (ADC input 9), CAN0Rx, I2C2SCL (open-drain with active pull-up), and U5Rx. |
| 60 | PE5 | bidirectional | GPIO port E bit 5 with TTL-compatible levels; alternate functions are AIN8 (ADC input 8), CAN0Tx, I2C2SDA (open-drain), and U5Tx. |
| 61 | PD0 | bidirectional | GPIO port D bit 0 with TTL-compatible levels; alternate functions are AIN7, SSI3Clk, SSI1Clk, I2C3SCL (open-drain with active pull-up), and WT2CCP0. |
| 62 | PD1 | bidirectional | GPIO port D bit 1 with TTL-compatible levels; alternate functions are AIN6, SSI3Fss, SSI1Fss, I2C3SDA (open-drain), and WT2CCP1. |
| 63 | PD2 | bidirectional | GPIO port D bit 2 with TTL-compatible levels; alternate functions are AIN5, SSI3Rx, SSI1Rx, and WT3CCP0. |
| 64 | PD3 | bidirectional | GPIO port D bit 3 with TTL-compatible levels; alternate functions are AIN4, SSI3Tx, SSI1Tx, and WT3CCP1. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## CAD (KiCad official)
- Symbol: `TM4C1231D5PMIR`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `tm4c1231d5pmir-etched.step` / `tm4c1231d5pmir-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tm4c1231d5pmir.step` / `tm4c1231d5pmir.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tm4c1231d5pm.pdf) (1149 pp, sha256 `209599ee3de8e332`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tm4c1231d5pmir-datasheet.pdf)