Generated by kicad-footprint-generator · KiCad file format 20260206
TM2317
TM(Shenzhen Titan Micro Elec) · Audio Interface ICs · QFN-32(5x5)
TM2317 from TM(Shenzhen Titan Micro Elec), in a QFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OLINL | output | Output of the left-channel line-input EQ setting amplifier. |
| 2 | LINL | input | Inverting input of the left-channel line-input EQ setting amplifier. |
| 3 | LINSDA | input | Clock input for production trimming, which can be connected to LINL and driven through a 3.5 mm audio jack. |
| 4 | LINSCL | input | Data input for production trimming, which can be connected to LINR and driven through a 3.5 mm audio jack. |
| 5 | LINR | input | Inverting input of the right-channel line-input EQ setting amplifier. |
| 6 | OLINR | output | Output of the right-channel line-input EQ setting amplifier. |
| 7 | MODE_SCL | input | I²C clock and power-up/power-down/monitor mode control pin; in stand-alone mode MODE must be held high for more than 2 ms to power up, with absolute limits of VNEG-0.5 V to 5 V and recommended control voltage VNEG to 3.7 V. |
| 8 | ANC_SDA | input | I²C serial data and ANC enable pin; it must be pulled high at power-up to enable ANC, and pulling it below 35% VDD with VDD at least 1 V selects play-only mode, with absolute limits of VNEG-0.5 V to 5 V. |
| 9 | AGND | power_in | Analog reference ground, with an absolute maximum rating of -0.5 V to 0.5 V. |
| 10 | OMICR | output | Output of the right-channel ANC microphone gain amplifier. |
| 11 | IAMP1R | input | Inverting input of the right-channel first-stage ANC filter amplifier. |
| 12 | OAMP1R | output | Output of the right-channel first-stage ANC filter amplifier. |
| 13 | VNEG | power_out | Negative charge-pump output with recommended range -1.8 V to -0.7 V; it must be connected to the QFN thermal pad and a 10 µF capacitor is required from this pin to GND. |
| 14 | CN | input | Negative terminal of the negative charge-pump capacitor; a 1 µF capacitor connects CN to CP. |
| 15 | GND | power_in | Ground for the negative charge pump. |
| 16 | CP | input | Positive terminal of the negative charge-pump capacitor; a 1 µF capacitor connects CP to CN. |
| 17 | VDD | power_in | Chip supply input, recommended 1 V to 1.8 V, with an absolute maximum of -0.5 V to 2.0 V. |
| 18 | BPL | input | Left-channel bypass audio signal input. |
| 19 | HAMPL | output | Left-channel headphone driver amplifier output. |
| 20 | MIXL | input | Left-channel mix signal input. |
| 21 | MIXR | input | Right-channel mix signal input. |
| 22 | HAMPR | output | Right-channel headphone driver amplifier output. |
| 23 | BPR | input | Right-channel bypass audio signal input. |
| 24 | OAMP1L | output | Output of the left-channel first-stage ANC filter amplifier. |
| 25 | IAMP1L | input | Inverting input of the left-channel first-stage ANC filter amplifier. |
| 26 | OMICL | output | Output of the left-channel ANC microphone gain amplifier. |
| 27 | MICVNL | input | Inverting-input AC-coupling ground for the left microphone gain amplifier, which requires a 10 µF capacitor to AGND. |
| 28 | MICL | input | Non-inverting input of the left-channel ANC microphone gain amplifier. |
| 29 | MICS | power_out | Microphone supply output, which requires a 10 µF capacitor to AGND. |
| 30 | IOUT | output | LED indicator drive output as an N-channel open-drain output, with a drive sink current of up to 2.2 mA. |
| 31 | MICR | input | Non-inverting input of the right-channel ANC microphone gain amplifier. |
| 32 | MICVNR | input | Inverting-input AC-coupling ground for the right microphone gain amplifier, which requires a 10 µF capacitor to AGND. |
| 33 | VNEG | power_out | Exposed QFN thermal pad, which the datasheet says must be connected to the VNEG pin; the VNEG node also takes a 10 µF capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | QFN-32(5x5) |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Working voltage | VDD | -0.5 | 2 | V | 3 | ||
| Analog ground AGND | AGND | -0.5 | 0.5 | V | 3 | ||
| Negative input pin VNEG | VNEG | -2 | 0.5 | V | 3 | ||
| Control pins MICS, ANC_SDA, MODE_SCL (upper limit; lower limit is VNEG-0.5) | 5 | V | 3 | ||||
| Other pin MICS | MICS | -0.5 | 5 | V | 3 | ||
| Latch-up suppression current | -100 | 100 | mA | 3 | |||
| Continuous power dissipation | 200 | mW | QFN32/40 package | 4 | |||
| Human body model ESD | 2 | kV | HBM | 4 | |||
| Junction temperature | 85 | ℃ | 4 | ||||
| Storage temperature | -55 | 125 | ℃ | 4 | |||
| Humidity | 5 | 85 | % | 4 | |||
| Reflow soldering temperature | 260 | ℃ | 4 | ||||
| VDD supply voltage | VDD | 1 | 1.8 | V | 正常工作模式 | 4 | |
| VNEG supply voltage | VNEG | -1.8 | -0.7 | V | 4 | ||
| Operating temperature | Ta | -20 | 85 | ℃ | 4 | ||
| Charge pump voltage | VVNEG | -1.8 | -0.7 | V | 4 | ||
| Microphone supply voltage | VMICS | 0 | 3.7 | V | MICS | 4 | |
| Control pin voltage (upper limit; lower limit is VNEG) | VCONTROL | 3.7 | V | MODE_SCL, ANC_SDA | 4 | ||
| IOUT drive current | IIOUT | 2.2 | mA | IOUT | 4 | ||
| Input voltage of VNEG charge pump | VIN | 1 | 1.5 | 1.8 | V | VDD | 9 |
| SCL, SDA input low level (upper limit) | VINL | 0.42 | V | 0.3*VDD(最大) | 16 | ||
| SCL, SDA input high level (lower limit) | VINH | 0.98 | V | 0.7*VDD(最小) | 16 | ||
| SCL, SDA input hysteresis | HYST | 0.2 | 0.45 | 0.8 | V | 16 | |
| Response time | tSP | 50 | 100 | ns | 16 | ||
| High-level SCL pulse width | tHW | 500 | ns | 16 | |||
| Low-level SCL pulse width | tLW | 500 | ns | 16 | |||
| SDA hold time | tPD | 0 | 50 | ns | 16 | ||
| Start condition hold time | tHD:STA | 200 | ns | 16 | |||
| SDA setup time | tSU | 250 | ns | 16 |
CAD (KiCad official)
- Symbol:
TM2317 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tm2317-etched.step/tm2317-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm2317.step/tm2317.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (30 pp, sha256
3fafa989a919bf61, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).