main
History Download
Ray Publish 0.1.0 82912f0

TM1925D

TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-14-150mil

TM1925D from TM(Shenzhen Titan Micro Elec), in a SOP-14-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Logic supply pin with an internal 5 V regulator; recommended supply is 4.5 to 5.5 V (5.0 V typical) with an absolute maximum of -0.4 to +7.0 V, and a 6 to 24 V supply is possible with a series resistor selected from the datasheet table.
2 SET input Channel-select input with an internal pull-down: SET=1 enables 6 channels (two RGB groups, 24x2 bit data), while SET=0 or floating enables all 9 channels.
3 DO output Serial data output that forwards the DIN data stream to the next cascaded chip after 24x3 bits are received; VOH is at least VDD-0.5 V at -6 mA and VOL is at most 0.4 V at 10 mA.
4 OUTR3 output Red PWM constant-current output for channel 3, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V.
5 OUTG3 output Green PWM constant-current output for channel 3, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V.
6 OUTB3 output Blue PWM constant-current output for channel 3, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V.
7 GND power_in System ground pin, to be connected to the system ground (0 V reference for all voltage ratings).
8 OUTB2 output Blue PWM constant-current output for channel 2, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V.
9 OUTG2 output Green PWM constant-current output for channel 2, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V.
10 OUTR2 output Red PWM constant-current output for channel 2, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V.
11 OUTB1 output Blue PWM constant-current output for channel 1, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V.
12 OUTG1 output Green PWM constant-current output for channel 1, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V.
13 OUTR1 output Red PWM constant-current output for channel 1, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V.
14 DIN input Serial data input that requires VIH of at least 3.5 V and VIL of at most 1.35 V at VDD=5.0 V, with a data clock rate of 400 to 900 kHz (800 kHz typical) and an input range of -0.5 to VDD+0.4 V through a 1 kΩ series resistor.

Key specifications

Parameter Value
Manufacturer TM(Shenzhen Titan Micro Elec)
Package SOP-14-150mil
Category Nixie Tube Driver/LED Driver
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic supply voltage VDD -0.4 7 V 3
Input voltage range DIN, SET Vin -0.4 V DIN, SET 3
Output current (DC) Iout 18 mA OUTR, OUTG, OUTB 3
Output voltage range Vout -0.4 30 V OUTR, OUTG, OUTB 3
DIN clock rate Fosc 400 900 KHz DIN 3
Operating temperature range Topr -40 85 ℃ 3
Storage temperature range Tstg -55 150 ℃ 3
ESD human body model ESD 2000 V Human body model (HBM) 3
Supply voltage VDD 4.5 5 5.5 V 3
Input voltage range DIN, SET VIN -0.5 V VDD=5V, DIN, SET in series with 1K resistor 3
DO output voltage range VDO -0.5 V VDD=5V, DO in series with 1K resistor 3
OUT output voltage range VOUT -0.5 24 V OUT=OFF 3
Operating temperature range TA -40 85 ℃ 3
Operating junction temperature range TJ -40 125 ℃ 3
Low-level output voltage DO VOL 0.4 V IOL=10mA: DO 3
High-level input voltage VIH 3.5 V VDD=5.0V 3
Low-level input voltage VIL 0 1.35 V VDD=5.0V 3
DIN, SET input current Iin -1 1 μA DIN、SET 接 VDD 或 GND 3
Logic supply current (VDD) Icco 1.2 3 4.2 mA OUTR,OUTG,OUTB,DIN, DO=开路 3
Constant output current range Iolc 16 17 18 mA OUTR,OUTG,OUTB= 3.0V 3
Output leakage current Iolkg 0 0.3 μA OUTR,OUTG, OUTB =OFF 3
Thermal resistance junction-to-ambient Rth(j-a) 79.2 190 ℃/W 3
Power dissipation PD 1.5 W Ta=25°C 3
PWM output duty cycle period TPWM 270 280 290 μs OUT with pull-up resistor 4
Constant current error (channel to channel) ΔIolc0 -2.5 2.5 % OUTR,OUTG,OUTB =ON, VOUTn =1V 4
Constant current error (chip to chip) ΔIolc1 -5 5 % OUTR,OUTG,OUTB =ON, VOUTn =1V 4
Line regulation ΔIolc2 -1 0.5 1 %/V OUTR,OUTG,OUTB =ON, VOUTn =1V 4
Load regulation ΔIolc3 -3 1 3 %/V OUTR,OUTG,OUTB =ON, VOUTn =1V~3V 4
OUT PWM output frequency FOUT 3 3.8 4.5 KHz OUTR, OUTG, OUTB 4
Input 0 code high-level time T0H 250 350 450 ns VDD=5V, GND=0V 5
Input 1 code high-level time T1H 620 750 900 ns VDD=5V, GND=0V 5
Reset code low-level time Treset 24 μs 5

CAD (KiCad official)

  • Symbol: TM1925D
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14-150mil (KiCad packages3D, STEP)
  • 3D model files: tm1925d-etched.step / tm1925d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm1925d.step / tm1925d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (10 pp, sha256 c6e981820c034607, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF