main
Ray
Publish 0.1.0
38699f5
TM1923
TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-8
TM1923 from TM(Shenzhen Titan Micro Elec), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTR | output | Red channel N-MOS open-drain constant-current output, fixed 18mA typical with OUT voltage rated up to 24.0 V when off. |
| 2 | OUTG | output | Green channel N-MOS open-drain constant-current output, fixed 18mA typical with OUT voltage rated up to 24.0 V when off. |
| 3 | OUTB | output | Blue channel N-MOS open-drain constant-current output, fixed 18mA typical with OUT voltage rated up to 24.0 V when off. |
| 4 | GND | power_in | Power ground, referenced to the system ground for all voltage ratings. |
| 5 | DO | output | Data output that forwards the DIN stream to the next cascaded chip after the first 24 bits are received, held low before forwarding, with a 1 kΩ series resistor specified for the DO voltage test. |
| 6 | DIN | input | Single-wire serial data input; logic high requires at least 0.7×VDD and logic low must be at most 0.3×VDD at VDD=5.0 V. |
| 7 | NC | unconnected | No internal electrical connection; leave unconnected. |
| 8 | VDD | power_in | Positive supply with an internal 5 V regulator; recommended operating range 4.5 V to 6.5 V with absolute maximum rating of -0.4 V to +7.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 逻辑电源电压 | VDD | -0.4 | 7 | V | 3 | ||
| OUT 端口电压 | Vout | -0.4 | 32 | V | 3 | ||
| 工作温度范围 | Topr | -40 | 85 | ℃ | 3 | ||
| 储存温度范围 | Tstg | -50 | 150 | ℃ | 3 | ||
| 静电 ESD 人体模式(HBM) | 3000 | V | 人体模式(HBM) | 3 | |||
| 静电 ESD 机器模式(MM) | 300 | V | 机器模式(MM) | 3 | |||
| 电源电压 | VDD | 4.5 | 5 | 6.5 | V | 3 | |
| OUT 端口电压 | Vout | 24 | V | OUT=OFF | 3 | ||
| 低电平输出电压 | Vol | 0.4 | V | Iol=10mA | 3 | ||
| 低电平输入电压 | Vil | 0 | V | VDD=5.0V | 3 | ||
| 高电平输出电流 | Ioh | 1 | mA | VDD=5.0V,Vdo=4.9V | 3 | ||
| 低电平输出电流 | Iol | 10 | mA | VDD=5.0V,Vdo=0.4V | 3 | ||
| 静态电流 | IDD | 1 | 1.65 | 2.3 | mA | VDD=4.5V,GND=0V,其他端口悬空 | 3 |
| OUT 输出恒定电流 | Iout | 17.1 | 18 | 18.9 | mA | OUTR,OUTG,OUTB=ON,Vout=3.0V | 3 |
| OUT 输出漏电流 | Iolkg | 0.5 | μA | OUTR,OUTG,OUTB=OFF,Vout=24.0V | 3 | ||
| 通道间恒流误差 | ΔIolc0 | -3 | 3 | % | OUTR,OUTG,OUTB=ON,Vout=3.0V | 3 | |
| 芯片间恒流误差 | ΔIolc1 | -5 | 5 | % | OUTR,OUTG,OUTB=ON,Vout=3.0V | 3 | |
| 消耗功率 | Pd | 250 | mW | Ta=25℃ | 3 | ||
| 输入 0 码,高电平时间 | T0H | 250 | 360 | 410 | ns | VDD=5.0V,GND=0V | 4 |
| 输入 1 码,高电平时间 | T1H | 650 | 720 | 1000 | ns | VDD=5.0V,GND=0V | 4 |
| Reset码,低电平时间 | Treset | 200 | 20000 | μs | 4 |
CAD (KiCad official)
- Symbol:
TM1923 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tm1923-etched.step/tm1923-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm1923.step/tm1923.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (9 pp, sha256
dc0f0da81516237b, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TM1923
**TM(Shenzhen Titan Micro Elec)** · LED Drivers · SOP-8
TM1923 from TM(Shenzhen Titan Micro Elec), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTR | output | Red channel N-MOS open-drain constant-current output, fixed 18mA typical with OUT voltage rated up to 24.0 V when off. |
| 2 | OUTG | output | Green channel N-MOS open-drain constant-current output, fixed 18mA typical with OUT voltage rated up to 24.0 V when off. |
| 3 | OUTB | output | Blue channel N-MOS open-drain constant-current output, fixed 18mA typical with OUT voltage rated up to 24.0 V when off. |
| 4 | GND | power_in | Power ground, referenced to the system ground for all voltage ratings. |
| 5 | DO | output | Data output that forwards the DIN stream to the next cascaded chip after the first 24 bits are received, held low before forwarding, with a 1 kΩ series resistor specified for the DO voltage test. |
| 6 | DIN | input | Single-wire serial data input; logic high requires at least 0.7×VDD and logic low must be at most 0.3×VDD at VDD=5.0 V. |
| 7 | NC | unconnected | No internal electrical connection; leave unconnected. |
| 8 | VDD | power_in | Positive supply with an internal 5 V regulator; recommended operating range 4.5 V to 6.5 V with absolute maximum rating of -0.4 V to +7.0 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 逻辑电源电压 | VDD | -0.4 | | 7 | V | | 3 |
| OUT 端口电压 | Vout | -0.4 | | 32 | V | | 3 |
| 工作温度范围 | Topr | -40 | | 85 | ℃ | | 3 |
| 储存温度范围 | Tstg | -50 | | 150 | ℃ | | 3 |
| 静电 ESD 人体模式(HBM) | | | | 3000 | V | 人体模式(HBM) | 3 |
| 静电 ESD 机器模式(MM) | | | | 300 | V | 机器模式(MM) | 3 |
| 电源电压 | VDD | 4.5 | 5 | 6.5 | V | | 3 |
| OUT 端口电压 | Vout | | | 24 | V | OUT=OFF | 3 |
| 低电平输出电压 | Vol | | | 0.4 | V | Iol=10mA | 3 |
| 低电平输入电压 | Vil | 0 | | | V | VDD=5.0V | 3 |
| 高电平输出电流 | Ioh | 1 | | | mA | VDD=5.0V,Vdo=4.9V | 3 |
| 低电平输出电流 | Iol | 10 | | | mA | VDD=5.0V,Vdo=0.4V | 3 |
| 静态电流 | IDD | 1 | 1.65 | 2.3 | mA | VDD=4.5V,GND=0V,其他端口悬空 | 3 |
| OUT 输出恒定电流 | Iout | 17.1 | 18 | 18.9 | mA | OUTR,OUTG,OUTB=ON,Vout=3.0V | 3 |
| OUT 输出漏电流 | Iolkg | | | 0.5 | μA | OUTR,OUTG,OUTB=OFF,Vout=24.0V | 3 |
| 通道间恒流误差 | ΔIolc0 | -3 | | 3 | % | OUTR,OUTG,OUTB=ON,Vout=3.0V | 3 |
| 芯片间恒流误差 | ΔIolc1 | -5 | | 5 | % | OUTR,OUTG,OUTB=ON,Vout=3.0V | 3 |
| 消耗功率 | Pd | | | 250 | mW | Ta=25℃ | 3 |
| 输入 0 码,高电平时间 | T0H | 250 | 360 | 410 | ns | VDD=5.0V,GND=0V | 4 |
| 输入 1 码,高电平时间 | T1H | 650 | 720 | 1000 | ns | VDD=5.0V,GND=0V | 4 |
| Reset码,低电平时间 | Treset | 200 | | 20000 | μs | | 4 |
## CAD (KiCad official)
- Symbol: `TM1923`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `tm1923-etched.step` / `tm1923-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tm1923.step` / `tm1923.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TM(Shenzhen Titan Micro Elec) datasheet](docs/tm1923-datasheet.pdf) (9 pp, sha256 `dc0f0da81516237b`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tm1923-datasheet.pdf)