← Commit history
README.md+74−82
@@ -8,34 +8,34 @@ TM1730 from TM(Shenzhen Titan Micro Elec), in a SOP-28. Pinout and pin descripti  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | GND | power_in | System ground connection. |-| 2 | COM0 | output | LCD common driver output COM0; unused common outputs must be left open. |-| 3 | COM1 | output | LCD common driver output COM1; unused common outputs must be left open. |-| 4 | COM2 | output | LCD common driver output COM2; unused common outputs must be left open. |-| 5 | COM3 | output | LCD common driver output COM3; unused common outputs must be left open. |-| 6 | SEG19/COM4/K19/INT | bidirectional | With M=0 and INT/ROW=0 it is LCD segment output and key input (pulled low internally during key input); with M=0 and INT/ROW=1 it is the INT interrupt output, active low when ACT=0 and active high when ACT=1. |-| 7 | SEG18/COM5/K18 | bidirectional | With M=0 it is LCD segment output and key input (pulled low internally during key input); with M=1 it is LCD common output COM5. |-| 8 | SEG17/COM6/K17 | bidirectional | With M=0 it is LCD segment output and key input (pulled low internally during key input); with M=1 it is LCD common output COM6. |-| 9 | SEG16/COM7/K16 | bidirectional | With M=0 it is LCD segment output and key input (pulled low internally during key input); with M=1 it is LCD common output COM7. |-| 10 | SEG15/K15/INT | bidirectional | With M=1 and INT/ROW=0 it is LCD segment output and key input with internal pull-down; with M=1 and INT/ROW=1 it is the INT interrupt output, active low when ACT=0 and active high when ACT=1. |-| 11 | SEG14/K14 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 12 | SEG13/K13 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 13 | SEG12/K12 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 14 | SEG11/K11 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 15 | SEG10/K10 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 16 | SEG9/K9 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 17 | SEG8/K8 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 18 | SEG7/K7 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 19 | SEG6/K6 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 20 | SEG5/K5 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 21 | SEG4/K4 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 22 | SEG3/K3 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 23 | SEG2/K2 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 24 | SEG1/K1 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 25 | SEG0/K0 | bidirectional | LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open. |-| 26 | SCL | input | I2C serial clock input; the bus runs at up to 400 kHz (fSCL max 400 kHz at VDD 3.0-5.5 V). |-| 27 | SDA | bidirectional | I2C serial data input/output; input low level must stay below 0.3VDD and input high level must be at least 0.7VDD. |-| 28 | VDD | power_in | Chip power supply input, operating range 2.4 V to 5.5 V (absolute maximum -0.3 V to 6.5 V). |+| 1 | GND | power_in | System ground connection for the device. |+| 2 | COM0 | output | LCD common driver output COM0 that must be left open if unused. |+| 3 | COM1 | output | LCD common driver output COM1 that must be left open if unused. |+| 4 | COM2 | output | LCD common driver output COM2 that must be left open if unused. |+| 5 | COM3 | output | LCD common driver output COM3 that must be left open if unused. |+| 6 | SEG19/COM4/K19/INT | bidirectional | Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key scan) when M=0 and INT/ROW=0, as INT interrupt output when M=0 and INT/ROW=1 (active low if ACT=0, active high if ACT=1), and as LCD common output COM4 when M=1. |+| 7 | SEG18/COM5/K18 | bidirectional | Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM5 when M=1. |+| 8 | SEG17/COM6/K17 | bidirectional | Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM6 when M=1. |+| 9 | SEG16/COM7/K16 | bidirectional | Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM7 when M=1. |+| 10 | SEG15/K15/INT | bidirectional | Multiplexed pin that acts as LCD segment output with key input (internal pull-down) when M=1 and INT/ROW=0, and as INT interrupt output when M=1 and INT/ROW=1, with polarity set by the ACT bit. |+| 11 | SEG0/K0 | bidirectional | LCD segment driver output SEG0 that doubles as key scan data input, pulled low internally during key input. |+| 12 | SEG1/K1 | bidirectional | LCD segment driver output SEG1 that doubles as key scan data input, pulled low internally during key input. |+| 13 | SEG2/K2 | bidirectional | LCD segment driver output SEG2 that doubles as key scan data input, pulled low internally during key input. |+| 14 | SEG3/K3 | bidirectional | LCD segment driver output SEG3 that doubles as key scan data input, pulled low internally during key input. |+| 15 | SEG4/K4 | bidirectional | LCD segment driver output SEG4 that doubles as key scan data input, pulled low internally during key input. |+| 16 | SEG5/K5 | bidirectional | LCD segment driver output SEG5 that doubles as key scan data input, pulled low internally during key input. |+| 17 | SEG6/K6 | bidirectional | LCD segment driver output SEG6 that doubles as key scan data input, pulled low internally during key input. |+| 18 | SEG7/K7 | bidirectional | LCD segment driver output SEG7 that doubles as key scan data input, pulled low internally during key input. |+| 19 | SEG8/K8 | bidirectional | LCD segment driver output SEG8 that doubles as key scan data input, pulled low internally during key input. |+| 20 | SEG9/K9 | bidirectional | LCD segment driver output SEG9 that doubles as key scan data input, pulled low internally during key input. |+| 21 | SEG10/K10 | bidirectional | LCD segment driver output SEG10 that doubles as key scan data input, pulled low internally during key input. |+| 22 | SEG11/K11 | bidirectional | LCD segment driver output SEG11 that doubles as key scan data input, pulled low internally during key input. |+| 23 | SEG12/K12 | bidirectional | LCD segment driver output SEG12 that doubles as key scan data input, pulled low internally during key input. |+| 24 | SEG13/K13 | bidirectional | LCD segment driver output SEG13 that doubles as key scan data input, pulled low internally during key input. |+| 25 | SEG14/K14 | bidirectional | LCD segment driver output SEG14 that doubles as key scan data input, pulled low internally during key input. |+| 26 | SCL | input | I2C serial clock input, with input low at 0 to 0.3VDD and input high at 0.7VDD to VDD, operating up to 400 kHz at VDD 3.0 to 5.5V. |+| 27 | SDA | bidirectional | I2C serial data input/output, with input low at 0 to 0.3VDD and input high at 0.7VDD to VDD. |+| 28 | VDD | power_in | Chip power supply input with an operating range of 2.4 to 5.5V and an absolute maximum of -0.3 to +6.5V. |  ## Key specifications @@ -52,63 +52,55 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Logic supply voltage (absolute maximum) | VDD | -0.3 |  | 6.5 | V |  | 3 |-| Input voltage range SDA, SCL | Vin | -0.3 |  |  | V |  | 3 |-| Operating temperature range (absolute maximum) | Topr | -40 |  | 85 | ℃ |  | 3 |+| Logic supply voltage | VDD | -0.3 |  | 6.5 | V |  | 3 |+| Input voltage SDA, SCL | Vin | -0.3 |  |  | V |  | 3 |+| ESD human body model (HBM) | ESD |  |  | 2000 | V | Human body model (HBM) | 3 |+| ESD machine model (MM) | ESD |  |  | 200 | V | Machine model (MM) | 3 |+| Operating temperature range | Topr | -40 |  | 85 | ℃ |  | 3 | | Storage temperature range | Tstg | -55 |  | 150 | ℃ |  | 3 |-| ESD human body model (HBM) |  |  |  | 2000 | V | Human body model (HBM) | 3 |-| Supply voltage VDD (recommended) | VDD | 2.5 |  | 5.5 | V |  | 3 |-| Operating temperature range Ta | Ta | -20 |  | 85 | ℃ |  | 3 |-| Operating junction temperature range Tj | Tj | -40 |  | 125 | ℃ |  | 3 |+| Supply voltage | VDD | 2.5 |  | 5.5 | V |  | 3 |+| Operating temperature range | Ta | -20 |  | 85 | ℃ |  | 3 |+| Operating junction temperature range | Tj | -40 |  | 125 | ℃ |  | 3 | | Operating voltage | VDD | 2.4 |  | 5.5 | V |  | 4 |-| Operating current, internal RC, LCD on, no load | Idd1 |  | 155 | 310 | μA | 3.0V 片内 RC 空载(LCD ON) | 4 |-| Operating current, internal RC, no load | Idd1 |  | 260 | 420 | μA | 5.0V 片内 RC,空载 | 4 |-| Operating current, external clock, LCD off, no load | Idd2 |  | 8 | 30 | μA | 3.0V 外部时钟 空载(LCD OFF) | 4 |-| Operating current, external clock, no load | Idd2 |  | 20 | 60 | μA | 5.0V 外部时钟,空载 | 4 |-| Standby current, power saving mode, no load | Istb |  | 1 | 3 | μA | 3.0V 省电模式,空载 | 4 |-| Standby current, power saving mode, no load | Istb |  | 2 | 5 | μA | 5.0V 省电模式,空载 | 4 |-| Input low voltage | Vil | 0 |  |  | V | SDA、SCL | 4 |+| Operating current, internal RC, LCD ON, no load | Idd1 |  | 155 | 310 | μA | VDD=3.0V, internal RC, no load (LCD ON) | 4 |+| Operating current, internal RC, LCD ON, no load | Idd1 |  | 260 | 420 | μA | VDD=5.0V, internal RC, no load | 4 |+| Operating current, external clock, LCD OFF, no load | Idd2 |  | 8 | 30 | μA | VDD=3.0V, external clock, no load (LCD OFF) | 4 |+| Operating current, external clock, no load | Idd2 |  | 20 | 60 | μA | VDD=5.0V, external clock, no load | 4 |+| Standby current, power-save mode, no load | Istb |  | 1 | 3 | μA | VDD=3.0V, power-save mode, no load | 4 |+| Standby current, power-save mode, no load | Istb |  | 2 | 5 | μA | VDD=5.0V, power-save mode, no load | 4 |+| Input low voltage SDA, SCL | Vil | 0 |  |  | V |  | 4 | | Input leakage current | Iil | -1 |  | 1 | μA | VIN = VSS or VDD | 4 |-| Low-level output current (SDA) | Ioh | 3 |  |  | mA | 3.0V, V=0.4V, SDA | 4 |-| Low-level output current (SDA) | Ioh | 6 |  |  | mA | 5.0V, V=0.4V, SDA | 4 |-| COM sink current | Iol1 | 80 | 160 |  | μA | 3.0V Vol=0.3V | 4 |-| COM sink current | Iol1 | 180 | 360 |  | μA | 5.0V Vol=0.5V | 4 |-| COM source current | Ioh1 | -80 | -120 |  | μA | 3.0V Voh=2.7V | 4 |-| COM source current | Ioh1 | -120 | -200 |  | μA | 5.0V Voh=4.5V | 4 |-| SEG sink current | Iol2 | 60 | 120 |  | μA | 3.0V Vol=0.3V | 4 |-| SEG sink current | Iol2 | 120 | 200 |  | μA | 5.0V Vol=0.5V | 4 |-| SEG source current | Ioh2 | -40 | -70 |  | μA | 3.0V Voh=2.7V | 4 |-| SEG source current | Ioh2 | -70 | -140 |  | μA | 5.0V Voh=4.5V | 4 |-| INT sink current | Iol3 | 1 |  |  | mA | 3.0V Vol=0.3V | 4 |-| INT sink current | Iol3 | 2 |  |  | mA | 5.0V Vol=0.5V | 4 |-| INT source current | Ioh3 | -1 |  |  | mA | 3.0V Voh=2.7V | 4 |-| INT source current | Ioh3 | -2 |  |  | mA | 5.0V Voh=4.5V | 4 |-| Input pull-up resistance | Rpl | 220 | 400 | 600 | KΩ | 3.0V, SEG0/K0~SEG19/K1, during keyscan | 4 |-| LCD drive scan frequency | fLCD | 58 | 72 | 90 | Hz | VDD=3.0V 20*4 display mode / 16*8 display mode | 4 |+| Low-level output current SDA | Ioh | 3 |  |  | mA | VDD=3.0V, V=0.4V, SDA | 4 |+| Low-level output current SDA | Ioh | 6 |  |  | mA | VDD=5.0V, SDA | 4 |+| COM sink current | Iol1 | 80 | 160 |  | μA | VDD=3.0V, Vol=0.3V | 4 |+| COM sink current | Iol1 | 180 | 360 |  | μA | VDD=5.0V, Vol=0.5V | 4 |+| COM source current | Ioh1 | -80 | -120 |  | μA | VDD=3.0V, Voh=2.7V | 4 |+| COM source current | Ioh1 | -120 | -200 |  | μA | VDD=5.0V, Voh=4.5V | 4 |+| SEG sink current | Iol2 | 60 | 120 |  | μA | VDD=3.0V, Vol=0.3V | 4 |+| SEG sink current | Iol2 | 120 | 200 |  | μA | VDD=5.0V, Vol=0.5V | 4 |+| SEG source current | Ioh2 | -40 | -70 |  | μA | VDD=3.0V, Voh=2.7V | 4 |+| SEG source current | Ioh2 | -70 | -140 |  | μA | VDD=5.0V, Voh=4.5V | 4 |+| INT sink current | Iol3 | 1 |  |  | mA | VDD=3.0V, Vol=0.3V | 4 |+| INT sink current | Iol3 | 2 |  |  | mA | VDD=5.0V, Vol=0.5V | 4 |+| INT source current | Ioh3 | -1 |  |  | mA | VDD=3.0V, Voh=2.7V | 4 |+| INT source current | Ioh3 | -2 |  |  | mA | VDD=5.0V, Voh=4.5V | 4 |+| Input pull-up resistance | Rpl | 220 | 400 | 600 | KΩ | VDD=3.0V, SEG0/K0~SEG19/K1, during keyscan | 4 |+| LCD drive scan frequency | fLCD | 58 | 72 | 90 | Hz | VDD=3.0V and VDD=5.0V; 20*4 display mode and 16*8 display mode | 4 | | VDD off time | tOFF | 20 |  |  | ms | VDD drop down to 0V | 4 |-| VDD sleep time | tSR | 0.05 |  |  | V/ms |  | 4 |-| SCL period | fSCL |  |  | 100 | kHZ | VDD=2.4~5.5V | 5 |-| SCL period | fSCL |  |  | 400 | kHZ | VDD=3.0~5.5V | 5 |-| Bus free time | tBUF | 4.7 |  |  | us | VDD=2.4~5.5V; bus must be free when a new transfer starts | 5 |-| Bus free time | tBUF | 1.3 |  |  | us | VDD=3.0~5.5V; bus must be free when a new transfer starts | 5 |-| Start condition hold time | tHD;STA | 4 |  |  | us | VDD=2.4~5.5V; after this period the first clock pulse is generated | 5 |-| Start condition hold time | tHD;STA | 0.6 |  |  | us | VDD=3.0~5.5V; after this period the first clock pulse is generated | 5 |-| Low SCL pulse width | tLOW | 4.7 |  |  | us | VDD=2.4~5.5V | 5 |-| Low SCL pulse width | tLOW | 1.3 |  |  | us | VDD=3.0~5.5V | 5 |-| High SCL pulse width | tHIGH | 4 |  |  | us | VDD=2.4~5.5V | 5 |-| High SCL pulse width | tHIGH | 0.6 |  |  | us | VDD=3.0~5.5V | 5 |-| Start condition setup time | tSU;STA | 4.7 |  |  | us | VDD=2.4~5.5V; valid repeated start condition | 5 |-| Start condition setup time | tSU;STA | 0.6 |  |  | us | VDD=3.0~5.5V; valid repeated start condition | 5 |-| SDA setup time | tSDS | 250 |  |  | ns | VDD=2.4~5.5V | 5 |-| SDA setup time | tSDS | 100 |  |  | ns | VDD=3.0~5.5V | 5 |-| Input signal rise time | tr |  |  | 0.3 | us | VDD=2.4~5.5V | 5 |-| Input signal fall time | tf |  |  | 0.3 | us | VDD=2.4~5.5V | 5 |-| Stop condition setup time | tSU;STO | 4 |  |  | us | VDD=2.4~5.5V | 5 |-| Stop condition setup time | tSU;STO | 0.6 |  |  | us | VDD=3.0~5.5V | 5 |-| Clock output valid time | tAA |  |  | 3.5 | μs | VDD=2.4~5.5V | 5 |-| Clock output valid time | tAA |  |  | 0.9 | μs | VDD=3.0~5.5V | 5 |-| Input filter time (noise suppression) | tSP |  |  | 100 | ns | VDD=2.4~5.5V; SDA and SCL pins | 5 |-| Input filter time (noise suppression) | tSP |  |  | 50 | ns | VDD=3.0~5.5V; SDA and SCL pins | 5 |+| VDD sleep rate | tSR | 0.05 |  |  | V/ms |  | 4 |+| SCL clock frequency | fSCL |  |  | 100 | kHZ | VDD=2.4V~5.5V column | 5 |+| Bus free time | tBUF | 4.7 |  |  | us | Bus must be free before a new transfer starts (VDD=2.4V~5.5V column) | 5 |+| START condition hold time | tHD;STA | 4 |  |  | us | First clock pulse generated after this period (VDD=2.4V~5.5V column) | 5 |+| SCL low pulse width | tLOW | 4.7 |  |  | us | VDD=2.4V~5.5V column | 5 |+| SCL high pulse width | tHIGH | 4 |  |  | us | VDD=2.4V~5.5V column | 5 |+| START condition setup time | tSU;STA | 4.7 |  |  | us | Valid repeated START condition (VDD=2.4V~5.5V column) | 5 |+| SDA hold time | tSDH | 0 |  |  | ns | VDD=2.4V~5.5V column | 5 |+| SDA setup time | tSDS | 250 |  |  | ns | VDD=2.4V~5.5V column | 5 |+| Input signal rise time | tr |  |  | 0.3 | us | VDD=2.4V~5.5V column | 5 |+| Input signal fall time | tf |  |  | 0.3 | us | VDD=2.4V~5.5V column | 5 |+| STOP condition setup time | tSU;STO | 4 |  |  | us | VDD=2.4V~5.5V column | 5 |+| Clock output valid time | tAA |  |  | 3.5 | μs | VDD=2.4V~5.5V column | 5 |+| Input filter time (SDA and SCL pins) | tSP |  |  | 100 | ns | Noise suppression time, VDD=2.4V~5.5V column | 5 |  ## CAD (KiCad official) @@ -121,7 +113,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [TM(Shenzhen Titan Micro Elec) datasheet](docs/tm1730-datasheet.pdf) (19 pp, sha256 `871dc1233799a179`, retrieved 2026-11-13, tier: lcsc)+- **Datasheet:** [TM(Shenzhen Titan Micro Elec) datasheet, copy hosted by LCSC](docs/tm1730-datasheet.pdf) (19 pp, sha256 `871dc1233799a179`, retrieved 2026-11-17) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original. - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+52−51
@@ -1,6 +1,6 @@ {   "slug": "tm1730",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "TM(Shenzhen Titan Micro Elec) LCD Drivers, SOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -51,7 +51,7 @@       "lcsc": "C5174522"     },     "distributor_check": {-      "checked_at": "2026-11-13T01:33:47Z",+      "checked_at": "2026-11-17T22:21:21Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -67,169 +67,169 @@         "number": "1",         "name": "GND",         "type": "power_in",-        "description": "System ground connection."+        "description": "System ground connection for the device."       },       {         "number": "2",         "name": "COM0",         "type": "output",-        "description": "LCD common driver output COM0; unused common outputs must be left open."+        "description": "LCD common driver output COM0 that must be left open if unused."       },       {         "number": "3",         "name": "COM1",         "type": "output",-        "description": "LCD common driver output COM1; unused common outputs must be left open."+        "description": "LCD common driver output COM1 that must be left open if unused."       },       {         "number": "4",         "name": "COM2",         "type": "output",-        "description": "LCD common driver output COM2; unused common outputs must be left open."+        "description": "LCD common driver output COM2 that must be left open if unused."       },       {         "number": "5",         "name": "COM3",         "type": "output",-        "description": "LCD common driver output COM3; unused common outputs must be left open."+        "description": "LCD common driver output COM3 that must be left open if unused."       },       {         "number": "6",         "name": "SEG19/COM4/K19/INT",         "type": "bidirectional",-        "description": "With M=0 and INT/ROW=0 it is LCD segment output and key input (pulled low internally during key input); with M=0 and INT/ROW=1 it is the INT interrupt output, active low when ACT=0 and active high when ACT=1."+        "description": "Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key scan) when M=0 and INT/ROW=0, as INT interrupt output when M=0 and INT/ROW=1 (active low if ACT=0, active high if ACT=1), and as LCD common output COM4 when M=1."       },       {         "number": "7",         "name": "SEG18/COM5/K18",         "type": "bidirectional",-        "description": "With M=0 it is LCD segment output and key input (pulled low internally during key input); with M=1 it is LCD common output COM5."+        "description": "Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM5 when M=1."       },       {         "number": "8",         "name": "SEG17/COM6/K17",         "type": "bidirectional",-        "description": "With M=0 it is LCD segment output and key input (pulled low internally during key input); with M=1 it is LCD common output COM6."+        "description": "Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM6 when M=1."       },       {         "number": "9",         "name": "SEG16/COM7/K16",         "type": "bidirectional",-        "description": "With M=0 it is LCD segment output and key input (pulled low internally during key input); with M=1 it is LCD common output COM7."+        "description": "Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM7 when M=1."       },       {         "number": "10",         "name": "SEG15/K15/INT",         "type": "bidirectional",-        "description": "With M=1 and INT/ROW=0 it is LCD segment output and key input with internal pull-down; with M=1 and INT/ROW=1 it is the INT interrupt output, active low when ACT=0 and active high when ACT=1."+        "description": "Multiplexed pin that acts as LCD segment output with key input (internal pull-down) when M=1 and INT/ROW=0, and as INT interrupt output when M=1 and INT/ROW=1, with polarity set by the ACT bit."       },       {         "number": "11",-        "name": "SEG14/K14",+        "name": "SEG0/K0",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG0 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "12",-        "name": "SEG13/K13",+        "name": "SEG1/K1",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG1 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "13",-        "name": "SEG12/K12",+        "name": "SEG2/K2",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG2 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "14",-        "name": "SEG11/K11",+        "name": "SEG3/K3",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG3 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "15",-        "name": "SEG10/K10",+        "name": "SEG4/K4",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG4 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "16",-        "name": "SEG9/K9",+        "name": "SEG5/K5",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG5 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "17",-        "name": "SEG8/K8",+        "name": "SEG6/K6",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG6 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "18",         "name": "SEG7/K7",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG7 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "19",-        "name": "SEG6/K6",+        "name": "SEG8/K8",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG8 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "20",-        "name": "SEG5/K5",+        "name": "SEG9/K9",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG9 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "21",-        "name": "SEG4/K4",+        "name": "SEG10/K10",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG10 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "22",-        "name": "SEG3/K3",+        "name": "SEG11/K11",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG11 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "23",-        "name": "SEG2/K2",+        "name": "SEG12/K12",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG12 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "24",-        "name": "SEG1/K1",+        "name": "SEG13/K13",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG13 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "25",-        "name": "SEG0/K0",+        "name": "SEG14/K14",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG14 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "26",         "name": "SCL",         "type": "input",-        "description": "I2C serial clock input; the bus runs at up to 400 kHz (fSCL max 400 kHz at VDD 3.0-5.5 V)."+        "description": "I2C serial clock input, with input low at 0 to 0.3VDD and input high at 0.7VDD to VDD, operating up to 400 kHz at VDD 3.0 to 5.5V."       },       {         "number": "27",         "name": "SDA",         "type": "bidirectional",-        "description": "I2C serial data input/output; input low level must stay below 0.3VDD and input high level must be at least 0.7VDD."+        "description": "I2C serial data input/output, with input low at 0 to 0.3VDD and input high at 0.7VDD to VDD."       },       {         "number": "28",         "name": "VDD",         "type": "power_in",-        "description": "Chip power supply input, operating range 2.4 V to 5.5 V (absolute maximum -0.3 V to 6.5 V)."+        "description": "Chip power supply input with an operating range of 2.4 to 5.5V and an absolute maximum of -0.3 to +6.5V."       }     ],     "provenance": {@@ -243,17 +243,18 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet's pin table gives only pin-number ranges for several groups (COM0~COM3 = 2~5; SEG0/K0~; Pin 6 and pin 10 have the INT function that depends on the M and INT/ROW command bits, not a fixed f; Pin types for SCL (input), COM0~COM3 (output) and SEG pins (bidirectional) were assigned from the da"+          "extractor flagged: The pin diagram text in the datasheet is garbled, so the exact pin-number order within the ranges 7~; The table gives pins 11~25 for SEG0/K0 through SEG14/K14 as a range; the one-to-one pin assignment w; The table gives COM0~COM3 as pins 2~5; the individual assignment was inferred from sequence. Verify "         ],         "pages_sent": 19,-        "cost_usd": 0.0992,-        "at": "2026-11-13T01:33:27"+        "cost_usd": 0.0973,+        "at": "2026-11-17T22:20:47"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/b119930c4acfdbaff69e6364f89eb9e6.pdf",         "pages": 19,         "sha256": "871dc1233799a179",-        "source_tier": "lcsc"+        "source_tier": "lcsc",+        "citation": "TM(Shenzhen Titan Micro Elec) datasheet, copy hosted by LCSC"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {@@ -284,7 +285,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-13",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -302,8 +303,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "925957f40786b5b23ef4784145199eda611137035c325b679888a3150e6abda1",-        "checked": "2026-11-13",+        "sha256": "61653bbf7026366029af60f591108efa916f73260a63f3fc50253e91fd298e2d",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+55−52
@@ -4,7 +4,7 @@   "slug": "tm1730",   "title": "TM1730",   "brief": "TM(Shenzhen Titan Micro Elec) LCD Drivers, SOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,7 +34,7 @@       "lcsc": "C5174522"     },     "distributor_check": {-      "checked_at": "2026-11-13T01:33:47Z",+      "checked_at": "2026-11-17T22:21:21Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -50,169 +50,169 @@         "number": "1",         "name": "GND",         "type": "power_in",-        "description": "System ground connection."+        "description": "System ground connection for the device."       },       {         "number": "2",         "name": "COM0",         "type": "output",-        "description": "LCD common driver output COM0; unused common outputs must be left open."+        "description": "LCD common driver output COM0 that must be left open if unused."       },       {         "number": "3",         "name": "COM1",         "type": "output",-        "description": "LCD common driver output COM1; unused common outputs must be left open."+        "description": "LCD common driver output COM1 that must be left open if unused."       },       {         "number": "4",         "name": "COM2",         "type": "output",-        "description": "LCD common driver output COM2; unused common outputs must be left open."+        "description": "LCD common driver output COM2 that must be left open if unused."       },       {         "number": "5",         "name": "COM3",         "type": "output",-        "description": "LCD common driver output COM3; unused common outputs must be left open."+        "description": "LCD common driver output COM3 that must be left open if unused."       },       {         "number": "6",         "name": "SEG19/COM4/K19/INT",         "type": "bidirectional",-        "description": "With M=0 and INT/ROW=0 it is LCD segment output and key input (pulled low internally during key input); with M=0 and INT/ROW=1 it is the INT interrupt output, active low when ACT=0 and active high when ACT=1."+        "description": "Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key scan) when M=0 and INT/ROW=0, as INT interrupt output when M=0 and INT/ROW=1 (active low if ACT=0, active high if ACT=1), and as LCD common output COM4 when M=1."       },       {         "number": "7",         "name": "SEG18/COM5/K18",         "type": "bidirectional",-        "description": "With M=0 it is LCD segment output and key input (pulled low internally during key input); with M=1 it is LCD common output COM5."+        "description": "Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM5 when M=1."       },       {         "number": "8",         "name": "SEG17/COM6/K17",         "type": "bidirectional",-        "description": "With M=0 it is LCD segment output and key input (pulled low internally during key input); with M=1 it is LCD common output COM6."+        "description": "Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM6 when M=1."       },       {         "number": "9",         "name": "SEG16/COM7/K16",         "type": "bidirectional",-        "description": "With M=0 it is LCD segment output and key input (pulled low internally during key input); with M=1 it is LCD common output COM7."+        "description": "Multiplexed pin that acts as LCD segment output and key input (pulled low internally during key input) when M=0, and as LCD common output COM7 when M=1."       },       {         "number": "10",         "name": "SEG15/K15/INT",         "type": "bidirectional",-        "description": "With M=1 and INT/ROW=0 it is LCD segment output and key input with internal pull-down; with M=1 and INT/ROW=1 it is the INT interrupt output, active low when ACT=0 and active high when ACT=1."+        "description": "Multiplexed pin that acts as LCD segment output with key input (internal pull-down) when M=1 and INT/ROW=0, and as INT interrupt output when M=1 and INT/ROW=1, with polarity set by the ACT bit."       },       {         "number": "11",-        "name": "SEG14/K14",+        "name": "SEG0/K0",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG0 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "12",-        "name": "SEG13/K13",+        "name": "SEG1/K1",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG1 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "13",-        "name": "SEG12/K12",+        "name": "SEG2/K2",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG2 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "14",-        "name": "SEG11/K11",+        "name": "SEG3/K3",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG3 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "15",-        "name": "SEG10/K10",+        "name": "SEG4/K4",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG4 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "16",-        "name": "SEG9/K9",+        "name": "SEG5/K5",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG5 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "17",-        "name": "SEG8/K8",+        "name": "SEG6/K6",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG6 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "18",         "name": "SEG7/K7",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG7 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "19",-        "name": "SEG6/K6",+        "name": "SEG8/K8",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG8 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "20",-        "name": "SEG5/K5",+        "name": "SEG9/K9",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG9 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "21",-        "name": "SEG4/K4",+        "name": "SEG10/K10",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG10 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "22",-        "name": "SEG3/K3",+        "name": "SEG11/K11",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG11 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "23",-        "name": "SEG2/K2",+        "name": "SEG12/K12",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG12 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "24",-        "name": "SEG1/K1",+        "name": "SEG13/K13",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG13 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "25",-        "name": "SEG0/K0",+        "name": "SEG14/K14",         "type": "bidirectional",-        "description": "LCD segment driver output and key-scan input; pulled low internally during key input; unused segment outputs must be left open."+        "description": "LCD segment driver output SEG14 that doubles as key scan data input, pulled low internally during key input."       },       {         "number": "26",         "name": "SCL",         "type": "input",-        "description": "I2C serial clock input; the bus runs at up to 400 kHz (fSCL max 400 kHz at VDD 3.0-5.5 V)."+        "description": "I2C serial clock input, with input low at 0 to 0.3VDD and input high at 0.7VDD to VDD, operating up to 400 kHz at VDD 3.0 to 5.5V."       },       {         "number": "27",         "name": "SDA",         "type": "bidirectional",-        "description": "I2C serial data input/output; input low level must stay below 0.3VDD and input high level must be at least 0.7VDD."+        "description": "I2C serial data input/output, with input low at 0 to 0.3VDD and input high at 0.7VDD to VDD."       },       {         "number": "28",         "name": "VDD",         "type": "power_in",-        "description": "Chip power supply input, operating range 2.4 V to 5.5 V (absolute maximum -0.3 V to 6.5 V)."+        "description": "Chip power supply input with an operating range of 2.4 to 5.5V and an absolute maximum of -0.3 to +6.5V."       }     ],     "provenance": {@@ -226,17 +226,18 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet's pin table gives only pin-number ranges for several groups (COM0~COM3 = 2~5; SEG0/K0~; Pin 6 and pin 10 have the INT function that depends on the M and INT/ROW command bits, not a fixed f; Pin types for SCL (input), COM0~COM3 (output) and SEG pins (bidirectional) were assigned from the da"+          "extractor flagged: The pin diagram text in the datasheet is garbled, so the exact pin-number order within the ranges 7~; The table gives pins 11~25 for SEG0/K0 through SEG14/K14 as a range; the one-to-one pin assignment w; The table gives COM0~COM3 as pins 2~5; the individual assignment was inferred from sequence. Verify "         ],         "pages_sent": 19,-        "cost_usd": 0.0992,-        "at": "2026-11-13T01:33:27"+        "cost_usd": 0.0973,+        "at": "2026-11-17T22:20:47"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/b119930c4acfdbaff69e6364f89eb9e6.pdf",         "pages": 19,         "sha256": "871dc1233799a179",-        "source_tier": "lcsc"+        "source_tier": "lcsc",+        "citation": "TM(Shenzhen Titan Micro Elec) datasheet, copy hosted by LCSC"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {@@ -267,7 +268,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-13",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -285,8 +286,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "925957f40786b5b23ef4784145199eda611137035c325b679888a3150e6abda1",-        "checked": "2026-11-13",+        "sha256": "61653bbf7026366029af60f591108efa916f73260a63f3fc50253e91fd298e2d",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -1076,5 +1077,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "TM(Shenzhen Titan Micro Elec) LCD Drivers, SOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
tm1730-hero.glb
⋯ 1 unchanged line ⋯
tm1730-hero.overlay.json+698−703
@@ -1,705 +1,700 @@ {- "spec": "adom-hero 1.4",- "mpn": "TM1730",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {-  "pad_outlines": {-   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-   "rgba": [-    0.0,-    0.902,-    0.863,-    0.5-   ],-   "pads": 28,-   "span_mm": 17.11,-   "dash_mm": 0.4278,-   "gap_mm": 0.2567,-   "pad_stroke_mm": 0.09-  },-  "silkscreen": {-   "material": "Silkscreen reference lines - 30 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.3-   ],-   "footprint_items": 7,-   "pin1": {-    "source": "footprint silkscreen",-    "pad": "1"-   }-  },-  "signal_names": {-   "material": "Signal names - 50 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.5-   ],-   "font": "DejaVu Sans Mono",-   "labels": 28,-   "sides": "top + mirrored underside (single-sided)",-   "omitted": null,-   "fallback_to_pad_number": 0-  }- },- "align": {-  "ok": true,-  "board_underside": true,-  "electrical_pads_without_contact": [],-  "mounting_pads_left_out": [],-  "centre_offset_mm": 0.0,-  "over_pads": true,-  "tolerance_mm": 1.369,-  "orientation_flipped": false,-  "contacts_bbox_mm": [-   -5.15,-   5.15,-   -8.461,-   8.461+  "spec": "adom-hero 1.4",+  "mpn": "TM1730",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 28,+      "span_mm": 17.11,+      "dash_mm": 0.4278,+      "gap_mm": 0.2567,+      "pad_stroke_mm": 0.09+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 28,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 1.369,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -5.15,+      5.15,+      -8.461,+      8.461+    ],+    "pads_bbox_mm": [+      -5.675,+      5.675,+      -8.555,+      8.555+    ],+    "seating_z_mm": 0.001+  },+  "sources": {+    "glb": "tm1730-etched.glb",+    "glb_sha256": "b3504212b4c6106f1985399f3c1bcfcea8b7baffd59540235d08b3561ffc334a",+    "footprint": "tm1730.kicad_mod",+    "footprint_sha256": "8df054b2353cacbe8e7228f97eacdd863eeebcfe7dc3a6315ee2deb370496519",+    "pins": "page.json component.pins",+    "pins_sha256": "81b431ea2b78d316847e560b0ba63328bcd7607d7e7d4b8756d34ac3099fcb43"+  },+  "generator": "adom-wiki 1.8.28 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "GND",+      "x": -5.825,+      "y": -8.255,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "COM0",+      "x": -5.825,+      "y": -6.985,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "COM1",+      "x": -5.825,+      "y": -5.715,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "COM2",+      "x": -5.825,+      "y": -4.445,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "COM3",+      "x": -5.825,+      "y": -3.175,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "SEG19/COM4/K19/INT",+      "x": -5.825,+      "y": -1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "SEG18/COM5/K18",+      "x": -5.825,+      "y": -0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "SEG17/COM6/K17",+      "x": -5.825,+      "y": 0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "9",+      "text": "SEG16/COM7/K16",+      "x": -5.825,+      "y": 1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "10",+      "text": "SEG15/K15/INT",+      "x": -5.825,+      "y": 3.175,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "11",+      "text": "SEG0/K0",+      "x": -5.825,+      "y": 4.445,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "12",+      "text": "SEG1/K1",+      "x": -5.825,+      "y": 5.715,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "13",+      "text": "SEG2/K2",+      "x": -5.825,+      "y": 6.985,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "14",+      "text": "SEG3/K3",+      "x": -5.825,+      "y": 8.255,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "15",+      "text": "SEG4/K4",+      "x": 5.825,+      "y": 8.255,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "16",+      "text": "SEG5/K5",+      "x": 5.825,+      "y": 6.985,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "17",+      "text": "SEG6/K6",+      "x": 5.825,+      "y": 5.715,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "18",+      "text": "SEG7/K7",+      "x": 5.825,+      "y": 4.445,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "19",+      "text": "SEG8/K8",+      "x": 5.825,+      "y": 3.175,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "20",+      "text": "SEG9/K9",+      "x": 5.825,+      "y": 1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "21",+      "text": "SEG10/K10",+      "x": 5.825,+      "y": 0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "22",+      "text": "SEG11/K11",+      "x": 5.825,+      "y": -0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "23",+      "text": "SEG12/K12",+      "x": 5.825,+      "y": -1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "24",+      "text": "SEG13/K13",+      "x": 5.825,+      "y": -3.175,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "25",+      "text": "SEG14/K14",+      "x": 5.825,+      "y": -4.445,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "26",+      "text": "SCL",+      "x": 5.825,+      "y": -5.715,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "27",+      "text": "SDA",+      "x": 5.825,+      "y": -6.985,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "28",+      "text": "VDD",+      "x": 5.825,+      "y": -8.255,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }   ],-  "pads_bbox_mm": [-   -5.675,-   5.675,-   -8.555,-   8.555-  ],-  "seating_z_mm": 0.001- },- "sources": {-  "glb": "tm1730-etched.glb",-  "glb_sha256": "b3504212b4c6106f1985399f3c1bcfcea8b7baffd59540235d08b3561ffc334a",-  "footprint": "tm1730.kicad_mod",-  "footprint_sha256": "8df054b2353cacbe8e7228f97eacdd863eeebcfe7dc3a6315ee2deb370496519",-  "pins": "page.json component.pins",-  "pins_sha256": "f13fc240726e6e2f79360176d707b314f055393b9968341c125e78f298cb77be"- },- "generator": "factory/hero_glb.py",- "labels": [-  {-   "pad": "1",-   "text": "GND",-   "x": -5.825,-   "y": -8.255,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "2",-   "text": "COM0",-   "x": -5.825,-   "y": -6.985,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "3",-   "text": "COM1",-   "x": -5.825,-   "y": -5.715,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "4",-   "text": "COM2",-   "x": -5.825,-   "y": -4.445,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "5",-   "text": "COM3",-   "x": -5.825,-   "y": -3.175,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "6",-   "text": "SEG19/COM4/K19/INT",-   "x": -5.825,-   "y": -1.905,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "7",-   "text": "SEG18/COM5/K18",-   "x": -5.825,-   "y": -0.635,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "8",-   "text": "SEG17/COM6/K17",-   "x": -5.825,-   "y": 0.635,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "9",-   "text": "SEG16/COM7/K16",-   "x": -5.825,-   "y": 1.905,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "10",-   "text": "SEG15/K15/INT",-   "x": -5.825,-   "y": 3.175,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "11",-   "text": "SEG14/K14",-   "x": -5.825,-   "y": 4.445,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "12",-   "text": "SEG13/K13",-   "x": -5.825,-   "y": 5.715,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "13",-   "text": "SEG12/K12",-   "x": -5.825,-   "y": 6.985,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "14",-   "text": "SEG11/K11",-   "x": -5.825,-   "y": 8.255,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "15",-   "text": "SEG10/K10",-   "x": 5.825,-   "y": 8.255,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "16",-   "text": "SEG9/K9",-   "x": 5.825,-   "y": 6.985,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "17",-   "text": "SEG8/K8",-   "x": 5.825,-   "y": 5.715,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "18",-   "text": "SEG7/K7",-   "x": 5.825,-   "y": 4.445,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "19",-   "text": "SEG6/K6",-   "x": 5.825,-   "y": 3.175,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "20",-   "text": "SEG5/K5",-   "x": 5.825,-   "y": 1.905,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "21",-   "text": "SEG4/K4",-   "x": 5.825,-   "y": 0.635,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "22",-   "text": "SEG3/K3",-   "x": 5.825,-   "y": -0.635,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "23",-   "text": "SEG2/K2",-   "x": 5.825,-   "y": -1.905,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "24",-   "text": "SEG1/K1",-   "x": 5.825,-   "y": -3.175,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "25",-   "text": "SEG0/K0",-   "x": 5.825,-   "y": -4.445,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "26",-   "text": "SCL",-   "x": 5.825,-   "y": -5.715,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "27",-   "text": "SDA",-   "x": 5.825,-   "y": -6.985,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "28",-   "text": "VDD",-   "x": 5.825,-   "y": -8.255,-   "align": "left",-   "vertical": false,-   "h": 0.6-  }- ],- "pads": [-  {-   "number": "1",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -8.255-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "2",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -6.985-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "3",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "4",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "5",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "6",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "7",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "8",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "9",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "10",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "11",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "12",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "13",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    6.985-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "14",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    8.255-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "15",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    8.255-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "16",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    6.985-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "17",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "18",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "19",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "20",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "21",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "22",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "23",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "24",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "25",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "26",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "27",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -6.985-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "28",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -8.255-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  }- ]-}\ No newline at end of file+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -8.255+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -6.985+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        6.985+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        8.255+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        8.255+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        6.985+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "26",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "27",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -6.985+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "28",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -8.255+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    }+  ]+}
tm1730.kicad_sym+43−43
@@ -4,120 +4,120 @@     (property "Value" "TM1730" (at 0 -22.86 0) (effects (font (size 1.27 1.27))))     (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))     (symbol "TM1730_0_1"-    (rectangle (start -17.78 17.78) (end 17.78 -20.32)+    (rectangle (start -20.32 17.78) (end 20.32 -20.32)       (stroke (width 0.254) (type default)) (fill (type background)))     )     (symbol "TM1730_1_1"-    (pin power_in line (at -22.86 15.24 0) (length 5.08)+    (pin power_in line (at -25.40 15.24 0) (length 5.08)       (name "GND" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )-    (pin output line (at -22.86 12.70 0) (length 5.08)+    (pin output line (at -25.40 12.70 0) (length 5.08)       (name "COM0" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )-    (pin output line (at -22.86 10.16 0) (length 5.08)+    (pin output line (at -25.40 10.16 0) (length 5.08)       (name "COM1" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )-    (pin output line (at -22.86 7.62 0) (length 5.08)+    (pin output line (at -25.40 7.62 0) (length 5.08)       (name "COM2" (effects (font (size 1.27 1.27))))       (number "4" (effects (font (size 1.27 1.27))))     )-    (pin output line (at -22.86 5.08 0) (length 5.08)+    (pin output line (at -25.40 5.08 0) (length 5.08)       (name "COM3" (effects (font (size 1.27 1.27))))       (number "5" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -22.86 2.54 0) (length 5.08)+    (pin bidirectional line (at -25.40 2.54 0) (length 5.08)       (name "SEG19/COM4/K19/INT" (effects (font (size 1.27 1.27))))       (number "6" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -22.86 0.00 0) (length 5.08)+    (pin bidirectional line (at -25.40 0.00 0) (length 5.08)       (name "SEG18/COM5/K18" (effects (font (size 1.27 1.27))))       (number "7" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -22.86 -2.54 0) (length 5.08)+    (pin bidirectional line (at -25.40 -2.54 0) (length 5.08)       (name "SEG17/COM6/K17" (effects (font (size 1.27 1.27))))       (number "8" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -22.86 -5.08 0) (length 5.08)+    (pin bidirectional line (at -25.40 -5.08 0) (length 5.08)       (name "SEG16/COM7/K16" (effects (font (size 1.27 1.27))))       (number "9" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -22.86 -7.62 0) (length 5.08)+    (pin bidirectional line (at -25.40 -7.62 0) (length 5.08)       (name "SEG15/K15/INT" (effects (font (size 1.27 1.27))))       (number "10" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -22.86 -10.16 0) (length 5.08)-      (name "SEG14/K14" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at -25.40 -10.16 0) (length 5.08)+      (name "SEG0/K0" (effects (font (size 1.27 1.27))))       (number "11" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -22.86 -12.70 0) (length 5.08)-      (name "SEG13/K13" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at -25.40 -12.70 0) (length 5.08)+      (name "SEG1/K1" (effects (font (size 1.27 1.27))))       (number "12" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -22.86 -15.24 0) (length 5.08)-      (name "SEG12/K12" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at -25.40 -15.24 0) (length 5.08)+      (name "SEG2/K2" (effects (font (size 1.27 1.27))))       (number "13" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -22.86 -17.78 0) (length 5.08)-      (name "SEG11/K11" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at -25.40 -17.78 0) (length 5.08)+      (name "SEG3/K3" (effects (font (size 1.27 1.27))))       (number "14" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at 22.86 15.24 180) (length 5.08)+    (pin power_in line (at 25.40 15.24 180) (length 5.08)       (name "VDD" (effects (font (size 1.27 1.27))))       (number "28" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 12.70 180) (length 5.08)+    (pin bidirectional line (at 25.40 12.70 180) (length 5.08)       (name "SDA" (effects (font (size 1.27 1.27))))       (number "27" (effects (font (size 1.27 1.27))))     )-    (pin input line (at 22.86 10.16 180) (length 5.08)+    (pin input line (at 25.40 10.16 180) (length 5.08)       (name "SCL" (effects (font (size 1.27 1.27))))       (number "26" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 7.62 180) (length 5.08)-      (name "SEG0/K0" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 25.40 7.62 180) (length 5.08)+      (name "SEG14/K14" (effects (font (size 1.27 1.27))))       (number "25" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 5.08 180) (length 5.08)-      (name "SEG1/K1" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 25.40 5.08 180) (length 5.08)+      (name "SEG13/K13" (effects (font (size 1.27 1.27))))       (number "24" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 2.54 180) (length 5.08)-      (name "SEG2/K2" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 25.40 2.54 180) (length 5.08)+      (name "SEG12/K12" (effects (font (size 1.27 1.27))))       (number "23" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 0.00 180) (length 5.08)-      (name "SEG3/K3" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 25.40 0.00 180) (length 5.08)+      (name "SEG11/K11" (effects (font (size 1.27 1.27))))       (number "22" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 -2.54 180) (length 5.08)-      (name "SEG4/K4" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 25.40 -2.54 180) (length 5.08)+      (name "SEG10/K10" (effects (font (size 1.27 1.27))))       (number "21" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 -5.08 180) (length 5.08)-      (name "SEG5/K5" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 25.40 -5.08 180) (length 5.08)+      (name "SEG9/K9" (effects (font (size 1.27 1.27))))       (number "20" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 -7.62 180) (length 5.08)-      (name "SEG6/K6" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 25.40 -7.62 180) (length 5.08)+      (name "SEG8/K8" (effects (font (size 1.27 1.27))))       (number "19" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 -10.16 180) (length 5.08)+    (pin bidirectional line (at 25.40 -10.16 180) (length 5.08)       (name "SEG7/K7" (effects (font (size 1.27 1.27))))       (number "18" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 -12.70 180) (length 5.08)-      (name "SEG8/K8" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 25.40 -12.70 180) (length 5.08)+      (name "SEG6/K6" (effects (font (size 1.27 1.27))))       (number "17" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 -15.24 180) (length 5.08)-      (name "SEG9/K9" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 25.40 -15.24 180) (length 5.08)+      (name "SEG5/K5" (effects (font (size 1.27 1.27))))       (number "16" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 22.86 -17.78 180) (length 5.08)-      (name "SEG10/K10" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 25.40 -17.78 180) (length 5.08)+      (name "SEG4/K4" (effects (font (size 1.27 1.27))))       (number "15" (effects (font (size 1.27 1.27))))     )     )
tm1730.lbr+46−46
@@ -107,40 +107,40 @@ <symbols> <symbol name="TM1730">   <description>TM(Shenzhen Titan Micro Elec) LCD Drivers, SOP-28. Pinout cross-checked by two models against the datasheet</description>-  <wire x1="-17.78" y1="17.78" x2="17.78" y2="17.78" width="0.254" layer="94"/>-  <wire x1="17.78" y1="17.78" x2="17.78" y2="-20.32" width="0.254" layer="94"/>-  <wire x1="17.78" y1="-20.32" x2="-17.78" y2="-20.32" width="0.254" layer="94"/>-  <wire x1="-17.78" y1="-20.32" x2="-17.78" y2="17.78" width="0.254" layer="94"/>+  <wire x1="-20.32" y1="17.78" x2="20.32" y2="17.78" width="0.254" layer="94"/>+  <wire x1="20.32" y1="17.78" x2="20.32" y2="-20.32" width="0.254" layer="94"/>+  <wire x1="20.32" y1="-20.32" x2="-20.32" y2="-20.32" width="0.254" layer="94"/>+  <wire x1="-20.32" y1="-20.32" x2="-20.32" y2="17.78" width="0.254" layer="94"/>   <text x="0.0000" y="20.3200" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-22.8600" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="GND" x="-22.86" y="15.24" length="middle" direction="pwr"/>-  <pin name="COM0" x="-22.86" y="12.7" length="middle" direction="out"/>-  <pin name="COM1" x="-22.86" y="10.16" length="middle" direction="out"/>-  <pin name="COM2" x="-22.86" y="7.62" length="middle" direction="out"/>-  <pin name="COM3" x="-22.86" y="5.08" length="middle" direction="out"/>-  <pin name="SEG19/COM4/K19/INT" x="-22.86" y="2.54" length="middle" direction="io"/>-  <pin name="SEG18/COM5/K18" x="-22.86" y="0" length="middle" direction="io"/>-  <pin name="SEG17/COM6/K17" x="-22.86" y="-2.54" length="middle" direction="io"/>-  <pin name="SEG16/COM7/K16" x="-22.86" y="-5.08" length="middle" direction="io"/>-  <pin name="SEG15/K15/INT" x="-22.86" y="-7.62" length="middle" direction="io"/>-  <pin name="SEG14/K14" x="-22.86" y="-10.16" length="middle" direction="io"/>-  <pin name="SEG13/K13" x="-22.86" y="-12.7" length="middle" direction="io"/>-  <pin name="SEG12/K12" x="-22.86" y="-15.24" length="middle" direction="io"/>-  <pin name="SEG11/K11" x="-22.86" y="-17.78" length="middle" direction="io"/>-  <pin name="VDD" x="22.86" y="15.24" length="middle" direction="pwr" rot="R180"/>-  <pin name="SDA" x="22.86" y="12.7" length="middle" direction="io" rot="R180"/>-  <pin name="SCL" x="22.86" y="10.16" length="middle" direction="in" rot="R180"/>-  <pin name="SEG0/K0" x="22.86" y="7.62" length="middle" direction="io" rot="R180"/>-  <pin name="SEG1/K1" x="22.86" y="5.08" length="middle" direction="io" rot="R180"/>-  <pin name="SEG2/K2" x="22.86" y="2.54" length="middle" direction="io" rot="R180"/>-  <pin name="SEG3/K3" x="22.86" y="0" length="middle" direction="io" rot="R180"/>-  <pin name="SEG4/K4" x="22.86" y="-2.54" length="middle" direction="io" rot="R180"/>-  <pin name="SEG5/K5" x="22.86" y="-5.08" length="middle" direction="io" rot="R180"/>-  <pin name="SEG6/K6" x="22.86" y="-7.62" length="middle" direction="io" rot="R180"/>-  <pin name="SEG7/K7" x="22.86" y="-10.16" length="middle" direction="io" rot="R180"/>-  <pin name="SEG8/K8" x="22.86" y="-12.7" length="middle" direction="io" rot="R180"/>-  <pin name="SEG9/K9" x="22.86" y="-15.24" length="middle" direction="io" rot="R180"/>-  <pin name="SEG10/K10" x="22.86" y="-17.78" length="middle" direction="io" rot="R180"/>+  <pin name="GND" x="-25.4" y="15.24" length="middle" direction="pwr"/>+  <pin name="COM0" x="-25.4" y="12.7" length="middle" direction="out"/>+  <pin name="COM1" x="-25.4" y="10.16" length="middle" direction="out"/>+  <pin name="COM2" x="-25.4" y="7.62" length="middle" direction="out"/>+  <pin name="COM3" x="-25.4" y="5.08" length="middle" direction="out"/>+  <pin name="SEG19/COM4/K19/INT" x="-25.4" y="2.54" length="middle" direction="io"/>+  <pin name="SEG18/COM5/K18" x="-25.4" y="0" length="middle" direction="io"/>+  <pin name="SEG17/COM6/K17" x="-25.4" y="-2.54" length="middle" direction="io"/>+  <pin name="SEG16/COM7/K16" x="-25.4" y="-5.08" length="middle" direction="io"/>+  <pin name="SEG15/K15/INT" x="-25.4" y="-7.62" length="middle" direction="io"/>+  <pin name="SEG0/K0" x="-25.4" y="-10.16" length="middle" direction="io"/>+  <pin name="SEG1/K1" x="-25.4" y="-12.7" length="middle" direction="io"/>+  <pin name="SEG2/K2" x="-25.4" y="-15.24" length="middle" direction="io"/>+  <pin name="SEG3/K3" x="-25.4" y="-17.78" length="middle" direction="io"/>+  <pin name="VDD" x="25.4" y="15.24" length="middle" direction="pwr" rot="R180"/>+  <pin name="SDA" x="25.4" y="12.7" length="middle" direction="io" rot="R180"/>+  <pin name="SCL" x="25.4" y="10.16" length="middle" direction="in" rot="R180"/>+  <pin name="SEG14/K14" x="25.4" y="7.62" length="middle" direction="io" rot="R180"/>+  <pin name="SEG13/K13" x="25.4" y="5.08" length="middle" direction="io" rot="R180"/>+  <pin name="SEG12/K12" x="25.4" y="2.54" length="middle" direction="io" rot="R180"/>+  <pin name="SEG11/K11" x="25.4" y="0" length="middle" direction="io" rot="R180"/>+  <pin name="SEG10/K10" x="25.4" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="SEG9/K9" x="25.4" y="-5.08" length="middle" direction="io" rot="R180"/>+  <pin name="SEG8/K8" x="25.4" y="-7.62" length="middle" direction="io" rot="R180"/>+  <pin name="SEG7/K7" x="25.4" y="-10.16" length="middle" direction="io" rot="R180"/>+  <pin name="SEG6/K6" x="25.4" y="-12.7" length="middle" direction="io" rot="R180"/>+  <pin name="SEG5/K5" x="25.4" y="-15.24" length="middle" direction="io" rot="R180"/>+  <pin name="SEG4/K4" x="25.4" y="-17.78" length="middle" direction="io" rot="R180"/> </symbol> </symbols> <devicesets>@@ -162,24 +162,24 @@         <connect gate="G$1" pin="SEG17/COM6/K17" pad="8"/>         <connect gate="G$1" pin="SEG16/COM7/K16" pad="9"/>         <connect gate="G$1" pin="SEG15/K15/INT" pad="10"/>-        <connect gate="G$1" pin="SEG14/K14" pad="11"/>-        <connect gate="G$1" pin="SEG13/K13" pad="12"/>-        <connect gate="G$1" pin="SEG12/K12" pad="13"/>-        <connect gate="G$1" pin="SEG11/K11" pad="14"/>+        <connect gate="G$1" pin="SEG0/K0" pad="11"/>+        <connect gate="G$1" pin="SEG1/K1" pad="12"/>+        <connect gate="G$1" pin="SEG2/K2" pad="13"/>+        <connect gate="G$1" pin="SEG3/K3" pad="14"/>         <connect gate="G$1" pin="VDD" pad="28"/>         <connect gate="G$1" pin="SDA" pad="27"/>         <connect gate="G$1" pin="SCL" pad="26"/>-        <connect gate="G$1" pin="SEG0/K0" pad="25"/>-        <connect gate="G$1" pin="SEG1/K1" pad="24"/>-        <connect gate="G$1" pin="SEG2/K2" pad="23"/>-        <connect gate="G$1" pin="SEG3/K3" pad="22"/>-        <connect gate="G$1" pin="SEG4/K4" pad="21"/>-        <connect gate="G$1" pin="SEG5/K5" pad="20"/>-        <connect gate="G$1" pin="SEG6/K6" pad="19"/>+        <connect gate="G$1" pin="SEG14/K14" pad="25"/>+        <connect gate="G$1" pin="SEG13/K13" pad="24"/>+        <connect gate="G$1" pin="SEG12/K12" pad="23"/>+        <connect gate="G$1" pin="SEG11/K11" pad="22"/>+        <connect gate="G$1" pin="SEG10/K10" pad="21"/>+        <connect gate="G$1" pin="SEG9/K9" pad="20"/>+        <connect gate="G$1" pin="SEG8/K8" pad="19"/>         <connect gate="G$1" pin="SEG7/K7" pad="18"/>-        <connect gate="G$1" pin="SEG8/K8" pad="17"/>-        <connect gate="G$1" pin="SEG9/K9" pad="16"/>-        <connect gate="G$1" pin="SEG10/K10" pad="15"/>+        <connect gate="G$1" pin="SEG6/K6" pad="17"/>+        <connect gate="G$1" pin="SEG5/K5" pad="16"/>+        <connect gate="G$1" pin="SEG4/K4" pad="15"/>       </connects>       <technologies>         <technology name="">