Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TM1638N-SOP28-TA1319B

TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-28

TM1638N-SOP28-TA1319B from TM(Shenzhen Titan Micro Elec), in a SOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 K1 input Key-scan input 1; the level read at this pin is latched after the display cycle ends, with an output pull-down resistance of 10 kΩ specified for K1-K3.
2 K2 input Key-scan input 2; the level read at this pin is latched after the display cycle ends, with an output pull-down resistance of 10 kΩ specified for K1-K3.
3 K3 input Key-scan input 3; the level read at this pin is latched after the display cycle ends, with an output pull-down resistance of 10 kΩ specified for K1-K3.
4 VDD power_in Logic power supply positive terminal; the datasheet specifies VDD of 4.5 V to 5.5 V (typical 5 V) with an absolute maximum of −0.5 V to +7.0 V.
5 SEG1/KS1 output Segment output 1 (also used as key-scan output KS1) with P-channel open-drain drive; source current is specified at 20-40 mA for Vo = VDD−2 V.
6 SEG2/KS2 output Segment output 2 (also used as key-scan output KS2) with P-channel open-drain drive; source current is specified at 20-40 mA for Vo = VDD−2 V.
7 SEG3/KS3 output Segment output 3 (also used as key-scan output KS3) with P-channel open-drain drive; source current is specified at 20-40 mA for Vo = VDD−2 V.
8 SEG4/KS4 output Segment output 4 (also used as key-scan output KS4) with P-channel open-drain drive; source current is specified at 20-40 mA for Vo = VDD−2 V.
9 SEG5/KS5 output Segment output 5 (also used as key-scan output KS5) with P-channel open-drain drive; source current is specified at 20-40 mA for Vo = VDD−2 V.
10 SEG6/KS6 output Segment output 6 (also used as key-scan output KS6) with P-channel open-drain drive; source current is specified at 20-40 mA for Vo = VDD−2 V.
11 SEG7/KS7 output Segment output 7 (also used as key-scan output KS7) with P-channel open-drain drive; source current is specified at 20-40 mA for Vo = VDD−2 V.
12 SEG8/KS8 output Segment output 8 (also used as key-scan output KS8) with P-channel open-drain drive; source current is specified at 20-40 mA for Vo = VDD−2 V.
13 SEG9 output Segment output 9 with P-channel open-drain drive; source current is specified at 20-40 mA for Vo = VDD−2 V.
14 SEG10 output Segment output 10 with P-channel open-drain drive; source current is specified at 20-40 mA for Vo = VDD−2 V.
15 VDD power_in Logic power supply positive terminal; the datasheet specifies VDD of 4.5 V to 5.5 V (typical 5 V) with an absolute maximum of −0.5 V to +7.0 V.
16 GRID8 output Digit (grid) output 8 with N-channel open-drain drive; sink current is specified at 80-140 mA for Vo = 0.3 V.
17 GRID7 output Digit (grid) output 7 with N-channel open-drain drive; sink current is specified at 80-140 mA for Vo = 0.3 V.
18 GND power_in Logic ground, to be connected to system ground.
19 GRID6 output Digit (grid) output 6 with N-channel open-drain drive; sink current is specified at 80-140 mA for Vo = 0.3 V.
20 GRID5 output Digit (grid) output 5 with N-channel open-drain drive; sink current is specified at 80-140 mA for Vo = 0.3 V.
21 GRID4 output Digit (grid) output 4 with N-channel open-drain drive; sink current is specified at 80-140 mA for Vo = 0.3 V.
22 GRID3 output Digit (grid) output 3 with N-channel open-drain drive; sink current is specified at 80-140 mA for Vo = 0.3 V.
23 GRID2 output Digit (grid) output 2 with N-channel open-drain drive; sink current is specified at 80-140 mA for Vo = 0.3 V.
24 GRID1 output Digit (grid) output 1 with N-channel open-drain drive; sink current is specified at 80-140 mA for Vo = 0.3 V.
25 GND power_in Logic ground, to be connected to system ground.
26 DIO bidirectional Serial data input/output, LSB first: data is sampled on the rising CLK edge and output on the falling edge through an N-channel open-drain stage, requiring an external 1 kΩ-10 kΩ pull-up (10 kΩ recommended) when reading keys.
27 CLK input Serial clock input: data is read on the rising edge and output on the falling edge, with a maximum clock frequency of 1 MHz at 50% duty cycle.
28 STB input Chip-select input: the serial interface is initialised on its falling edge, the first byte after STB goes low is taken as a command, and CLK is ignored while STB is high.

Key specifications

Parameter Value
Manufacturer TM(Shenzhen Titan Micro Elec)
Package SOP-28
Category LED Drivers
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
SEG driver source current (Vo = VDD-2V) Ioh1 20 25 40 mA SEG1~SEG10, Vo = VDD-2V 14
SEG driver source current (Vo = VDD-3V) Ioh2 20 30 50 mA SEG1~SEG10, Vo = VDD-3V 14
GRID driver sink current IOL1 80 140 mA GRID1-GRID8, Vo=0.3V 14
Input current II -1 1 μA VI = VDD / VSS 15
High-level input voltage (CLK, DIO, STB) VIH 0.7 VDD CLK, DIO, STB 15
Low-level input voltage (CLK, DIO, STB) VIL 0.3 VDD CLK, DIO, STB 15
Dynamic supply current IDDdyn 5 mA No load, display off 15
Rise time TTZH 1 2 μs CL = 300pF, SEG1~SEG10 15
Fall time TTHZ 120 μs CL = 300pF, SEGN, GRIDN 15
Propagation delay CLK to DIO (low to high-Z) tPLZ 300 ns CLK → DIO 15
Propagation delay (high-Z to low) tPZL 100 ns CL = 15pF, RL = 10KΩ 15
Maximum clock frequency Fmax 1 MHz Duty 50% 15
Input capacitance CI 15 pF 15
Clock pulse width PWCLK 400 ns 16
Strobe pulse width PWSTB 1 μs 16
Data setup time tSETUP 100 ns 16
Data hold time tHOLD 100 ns 16
CLK to STB time tCLK STB 1 μs CLK↑→STB↑ 16
Wait time tWAIT 1 μs CLK↑→CLK↓ 16
Logic supply voltage (absolute maximum) VDD -0.5 7 V 14
Logic input voltage (absolute maximum) VI1 -0.5 V 14
LED Seg driver output current (absolute maximum) IO1 -50 mA 14
LED Grid driver output current (absolute maximum) IO2 200 mA 14
Power dissipation PD 400 mW 14
Operating temperature Topt -40 85 ℃ 14
Storage temperature Tstg -65 150 ℃ 14
Logic supply voltage (recommended) VDD 5 V 14
High-level input voltage (recommended) VIH 0.7 VDD 14
Low-level input voltage (recommended) VIL 0 0.3 VDD 14
Output pull-down resistor RL 10 KΩ K1~K3 15
Hysteresis voltage VH 0.35 V CLK, DIO, STB 15
Oscillation frequency fosc 500 KHz R = 16.5 KΩ 15

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TM1638N-SOP28-TA1319B
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOP-28, generated on the KiCad land (body 7.52 x 17.93 mm, terminals on the pads, 2.59 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tm1638n-sop28-ta1319b-etched.step / tm1638n-sop28-ta1319b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm1638n-sop28-ta1319b.step / tm1638n-sop28-ta1319b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (17 pp, sha256 67e36e75b3eb32fe, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF