main
Ray Publish 0.1.0 5bf5078

TLVH431NAIDBZRR

Nexperia · Voltage References · TO-236AB

TLVH431NAIDBZRR from Nexperia, in a TO-236AB. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 REF input Reference input that sets the output voltage via an external resistor divider, with Vref of about 1.24 V (1228 to 1252 mV for A-grade at 25 °C) and a maximum reference current of 3 mA.
2 K passive Cathode of the shunt regulator, which sinks 0.08 mA to 70 mA and operates from Vref up to 14 V cathode-anode voltage.
3 A power_in Anode of the shunt regulator, normally connected to ground, and the soldering point used for thermal resistance Rth(j-sp) of 50 K/W max.

Key specifications

Parameter Value
Manufacturer Nexperia
Package TO-236AB
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference voltage Vref 1228 1240 1252 mV VKA = Vref; IK = 10 mA; Tamb = 25 °C 6
Reference voltage variation ΔVref 1.3 10 mV VKA = Vref; IK = 10 mA; Tamb = -40 °C to 85 °C 6
Ref voltage variation to cathode-anode voltage variation ratio ΔVref/ΔVKA -0.5 -2.7 mV/V IK = 10 mA; ΔVKA = Vref to 14 V 6
Reference current Iref 0.19 0.3 μA IK = 10 mA; R1 = 10 kΩ; R2 = open 6
Reference current variation ΔIref 0.06 0.16 μA IK = 10 mA; R1 = 10 kΩ; R2 = open; Tamb = -40 °C to 85 °C 6
Minimum cathode current IK(min) 55 80 μA VKA = Vref 6
Off-state current Ioff 0.01 0.05 μA VKA = 14 V; Vref = 0 6
Dynamic cathode-anode impedance ZKA 0.1 0.15 Ω IK = 0.1 mA to 70 mA; VKA = Vref; f < 1 kHz 6
Cathode-anode voltage VKA 14 V 4
Cathode current IK -25 80 mA 4
Reference current Iref 3 mA 4
Total power dissipation Ptot 350 mW Tamb ≤ 25 °C; FR4 PCB, standard footprint 4
Total power dissipation Ptot 580 mW Tamb ≤ 25 °C; FR4 PCB, mounting pad for anode 1 cm2 4
Total power dissipation Ptot 950 mW Tamb ≤ 25 °C; ceramic PCB, Al2O3, standard footprint 4
Junction temperature Tj 150 °C 4
Ambient temperature Tamb -40 85 °C TLVH431NXIDBZR 4
Storage temperature Tstg -65 150 °C 4
Electrostatic discharge voltage, human body model VESD 4 kV MIL-STD-883 (human body model); Tamb = 25 °C 4
Electrostatic discharge voltage, machine model VESD 200 V machine model; Tamb = 25 °C 4
Cathode current IK 0.08 70 mA 5
Thermal resistance from junction to ambient Rth(j-a) 360 K/W in free air; FR4 PCB, standard footprint 5
Thermal resistance from junction to ambient Rth(j-a) 216 K/W in free air; FR4 PCB, mounting pad for anode 1 cm2 5
Thermal resistance from junction to ambient Rth(j-a) 132 K/W in free air; ceramic PCB, Al2O3, standard footprint 5
Thermal resistance from junction to solder point Rth(j-sp) 50 K/W in free air; soldering point of anode 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TLVH431NAIDBZRR
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: TO-236AB, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlvh431naidbzrr-etched.step / tlvh431naidbzrr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlvh431naidbzrr.step / tlvh431naidbzrr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nexperia datasheet (17 pp, sha256 f697276a93043d84, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF