main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlv9062qdgkrq1: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tlv9062qdgkrq1-etched.glb tlv9062qdgkrq1: factory component page (tier=mfr) · Ray
tlv9062qdgkrq1-etched.step tlv9062qdgkrq1: factory component page (tier=mfr) · Ray
tlv9062qdgkrq1-hero.glb tlv9062qdgkrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
tlv9062qdgkrq1-hero.overlay.json tlv9062qdgkrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
tlv9062qdgkrq1.glb Publish 0.1.0 · Ray
tlv9062qdgkrq1.kicad_mod Publish 0.1.0 · Ray
tlv9062qdgkrq1.kicad_sym Publish 0.1.0 · Ray
tlv9062qdgkrq1.lbr Publish 0.1.0 · Ray
tlv9062qdgkrq1.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

TLV9062QDGKRQ1

Texas Instruments · Operational Amplifier · VSSOP-8

TLV9062QDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT1 output Output of channel 1.
2 IN1- input Inverting input of channel 1.
3 IN1+ input Noninverting input of channel 1.
4 V- power_in Negative (lowest) supply or ground for single-supply operation.
5 IN2+ input Noninverting input of channel 2.
6 IN2- input Inverting input of channel 2.
7 OUT2 output Output of channel 2.
8 V+ power_in Positive (highest) supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage [(V+), (V-)] 0 6 V 8
Signal input pins current -10 10 mA 8
Specified temperature, TA (absolute maximum table) TA -40 125 °C 8
Junction temperature TJ 150 °C 8
Storage temperature Tstg -65 150 °C 8
Supply voltage (VS = [V+], [V-]) VS 1.8 5.5 V 8
Specified temperature (recommended operating) TA -40 125 °C 8
Input offset voltage VOS -1.85 0.3 1.85 mV VS = 5 V 10
Input offset voltage over temperature VOS -2 2 mV VS = 5 V, TA = -40°C to 125°C 10
Power-supply rejection ratio PSRR -80 7 80 µV/V VS = 1.8 V, 5.5 V, VCM = (V-) 10
Common-mode rejection ratio CMRR 80 103 dB VS = 5.5 V, (V-), 0.1 V < VCM < (V+), 1.4 V, TA = -40°C to 125°C 10
Common-mode rejection ratio CMRR 57 75 dB VS = 5.5 V, VCM = -0.1 V to 5.6 V, TA = -40°C to 125°C 10
Common-mode rejection ratio CMRR 88 dB VS = 1.8 V, (V-), 0.1 V < VCM < (V+), 1.4 V, TA = -40°C to 125°C 10
Common-mode rejection ratio CMRR 70 dB VS = 1.8 V, VCM = -0.1 V to 1.9 V, TA = -40°C to 125°C 10
Open-loop voltage gain AOL 100 dB VS = 1.8 V, (V-) + 0.04 V < VO < (V+), 0.04 V, RL = 10 kΩ 10
Open-loop voltage gain AOL 104 130 dB VS = 5.5 V, (V-) + 0.05 V < VO < (V+), 0.05 V, RL = 10 kΩ 10
Open-loop voltage gain AOL 130 dB VS = 5.5 V, (V-) + 0.15 V < VO < (V+), 0.15 V, RL = 2 kΩ 10
Short-circuit current ISC -50 50 mA VS = 5 V 10
Voltage output swing from supply rails VO 20 mV VS = 5.5 V, RL = 10 kΩ 10
Voltage output swing from supply rails VO 60 mV VS = 5.5 V, RL = 2 kΩ 10
Quiescent current per amplifier IQ 538 750 µA VS = 5.5 V, IO = 0 mA 11
Quiescent current per amplifier IQ 800 µA VS = 5.5 V, IO = 0 mA, TA = -40°C to 125°C 11
Offset voltage drift dVOS/dT 0.53 µV/°C VS = 5 V, TA = -40°C to 125°C 10
Input bias current IB 5 pA 10
Input offset current IOS 5 pA 10
Channel separation, DC 100 dB At DC 10
Input voltage noise (peak-to-peak) En 4.77 µVPP VS = 5 V, f = 0.1 Hz to 10 Hz 10
Input voltage noise density en 10 nV/√ Hz VS = 5 V, f = 10 kHz 10
Input voltage noise density en 16 nV/√ Hz VS = 5 V, f = 1 kHz 10
Input current noise density in 23 fA/√ Hz f = 1 kHz 10
Differential input capacitance CID 2 pF 10
Common-mode input capacitance CIC 4 pF 10
Gain bandwidth product GBP 10 MHz VS = 5 V, G = +1 10
Phase margin φm 55 ° VS = 5 V, G = +1 10
Slew rate SR 6.5 V/µs VS = 5 V, G = +1 10
Settling time to 0.1% tS 0.5 µs To 0.1%, VS = 5 V, 2-V step, G = +1, CL = 100 pF 10
Settling time to 0.01% tS 1 µs To 0.01%, VS = 5 V, 2-V step, G = +1, CL = 100 pF 10
Overload recovery time tOR 0.2 µs VS = 5 V, VIN × gain > VS 10
Total harmonic distortion + noise THD + N 0.0008 % VS = 5.5 V, VCM = 2.5 V, VO = 1 VRMS, G = +1, f = 1 kHz 10
Open-loop output impedance ZO 100 Ω VS = 5 V, f = 10 MHz 11
Junction-to-ambient thermal resistance (DGK VSSOP, 8 pins) RθJA 198.5 °C/W TLV9062-Q1 DGK (VSSOP) 8 pins 9
Junction-to-case (top) thermal resistance (DGK VSSOP, 8 pins) RθJC(top) 87.2 °C/W TLV9062-Q1 DGK (VSSOP) 8 pins 9
Junction-to-board thermal resistance (DGK VSSOP, 8 pins) RθJB 120.3 °C/W TLV9062-Q1 DGK (VSSOP) 8 pins 9
Junction-to-top characterization parameter (DGK VSSOP, 8 pins) ψJT 23.8 °C/W TLV9062-Q1 DGK (VSSOP) 8 pins 9
Junction-to-board characterization parameter (DGK VSSOP, 8 pins) ψJB 118.7 °C/W TLV9062-Q1 DGK (VSSOP) 8 pins 9

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TLV9062QDGKRQ1
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv9062qdgkrq1-etched.step / tlv9062qdgkrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv9062qdgkrq1.step / tlv9062qdgkrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (55 pp, sha256 98fc4480b86c8b1d, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF