component
TLV9062
Public Made by Adomby adom
TI dual rail-to-rail op-amp, SOIC-8. 10 MHz, single 1.8-5.5 V, EMI-hardened, low cost. Datasheet-verified.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV9062
Texas Instruments · Operational amplifier · SOIC-8
Dual op-amp with rail-to-rail input and output on a single 1.8 to 5.5 V supply, offering 10 MHz of bandwidth and EMI-hardened inputs at low cost. The wider bandwidth over the commodity duals suits it to driving ADCs, active filters, and sensor front ends on 3.3 and 5 V boards, and both amplifiers use the standard dual SOIC-8 pinout. A capable, cheap general-purpose dual, the two-channel member of the TLV906x family.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of channel 1 op-amp. Rail-to-rail swing referenced to V+/V-. |
| 2 | IN1- | input | Inverting input of channel 1 op-amp. Rail-to-rail input range; 0.5pA typical input bias current. |
| 3 | IN1+ | input | Noninverting input of channel 1 op-amp. Rail-to-rail input range; 0.5pA typical input bias current. |
| 4 | V- | power_in | Negative (lowest) supply rail, or GND for single-supply operation. Supply range 1.8V to 5.5V referenced from V+ to V-. |
| 5 | IN2+ | input | Noninverting input of channel 2 op-amp. Rail-to-rail input range; 0.5pA typical input bias current. |
| 6 | IN2- | input | Inverting input of channel 2 op-amp. Rail-to-rail input range; 0.5pA typical input bias current. |
| 7 | OUT2 | output | Output of channel 2 op-amp. Rail-to-rail swing referenced to V+/V-. |
| 8 | V+ | power_in | Positive (highest) supply rail. Operational from 1.8V to 5.5V referenced from V+ to V-. |
Key specifications
| Parameter | Value |
|---|---|
| Type | Dual rail-to-rail op-amp |
| Gain-bandwidth | 10 MHz |
| Supply | 1.8-5.5 V (single) |
| Output | Rail-to-rail |
| Slew rate | 6.5 V/us |
| EMI | Hardened inputs |
| Package | SOIC-8 |
Ordering variants
Same part, different packaging or reel option.
TLV9062IDR (SOIC-8)TLV9062IDGKR (VSSOP-8)TLV9061IDCKR (single, SC70-5)
CAD (KiCad official)
- Symbol:
Amplifier_Operational:TLV9062 (KiCad official) - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tlv9062-etched.step/tlv9062-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv9062.step/tlv9062.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (99 pp, sha256
57cfc69310feba31, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).