Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV9030DBVR

Texas Instruments · IC · SOT-23-5

TLV9030DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN+ input Non-inverting (positive) comparator input; the recommended input range from V- is -0.2 V to 5.7 V, with an absolute maximum of -0.3 V to 6 V, and input signals swinging more than 0.3 V beyond the supply rails must be current-limited to 10 mA or less.
2 V- power_in Negative power supply, the reference for the 1.65 V to 5.5 V supply range (V+ - V-).
3 IN- input Inverting (negative) comparator input; the recommended input range from V- is -0.2 V to 5.7 V, with an absolute maximum of -0.3 V to 6 V, and input signals swinging more than 0.3 V beyond the supply rails must be current-limited to 10 mA or less.
4 OUT output Comparator output; the TLV903x push-pull output is rated from -0.3 V to (V+) + 0.3 V relative to V-, and can sink and source many milliamps to drive LEDs or capacitive loads.
5 V+ power_in Positive power supply, operating from 1.65 V to 5.5 V (V+ - V-) recommended with a 6 V absolute maximum supply voltage.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage, VS = 1.8V and 5V VOS -1.5 0.3 1.5 mV VS = 1.8V and 5V 9
Input offset voltage over temperature VOS -2 2 mV VS = 1.8V and 5V, TA = -40°C to +125°C 9
Input offset voltage drift dVIO/dT -0.5 0.5 µV/°C VS = 1.8V and 5V, TA = -40°C to +125°C 9
Quiescent current IQ 17.1 30 µA VS = 1.8V and 5V, No Load, Output Low 9
Quiescent current over temperature IQ 35 µA VS = 1.8V and 5V, No Load, Output Low, TA = -40°C to +125°C 9
Power-supply rejection ratio (push-pull version) PSRR 75 95 dB VS = 1.8V to 5V, TA = -40°C to +125°C (push-pull version) 9
Common-mode rejection ratio, VS = 5V CMRR 60 70 dB VS = 5V, (V-), 0.2V < VCM < (V+) + 0.2V, TA = -40°C to +125°C 9
Common-mode rejection ratio, VS = 1.8V CMRR 50 60 dB VS = 1.8V, (V-), 0.2V < VCM < (V+) + 0.2V, TA = -40°C to +125°C 9
Voltage swing from (V-) at 25°C VOL 75 125 mV ISINK = 4mA, TA = 25°C 9
Voltage swing from (V-) over temperature VOL 175 mV ISINK = 4mA, TA = -40°C to +125°C 9
Voltage swing from (V+) at 25°C (push-pull only) VOH 75 125 mV ISOURCE = 4mA, TA = 25°C (push-pull only) 9
Voltage swing from (V+) over temperature (push-pull only) VOH 175 mV ISOURCE = 4mA, TA = -40°C to +125°C (push-pull only) 9
Short-circuit current, sinking ISC 90 100 mA VS = 5V, Sinking 9
Short-circuit current, sourcing (push-pull only) ISC 90 100 mA VS = 5V, Sourcing (push-pull only) 9
Supply voltage VS -0.3 6 V 7
Input pins (IN+, IN-) from V- -0.3 6 V 7
Current into input pins (IN+, IN-) -10 10 mA 7
Output (OUT) from V-, push-pull only -0.3 V push-pull only 7
Output short circuit duration 10 s 7
Junction temperature TJ 150 °C 7
Storage temperature Tstg -65 150 °C 7
Supply voltage VS = (V+), (V-) VS 1.65 5.5 V 7
Input voltage range (IN+, IN-) from (V-) -0.2 5.7 V from (V-) 7
Ambient temperature TA -40 125 °C 7
Junction-to-ambient thermal resistance θJA 223.7 °C/W DBV (SOT-23), 5 pins 7
Junction-to-case (top) thermal resistance θJC(top) 123.2 °C/W DBV (SOT-23), 5 pins 7
Junction-to-board thermal resistance θJB 91.4 °C/W DBV (SOT-23), 5 pins 7
Junction-to-top characterization parameter ψJT 58.7 °C/W DBV (SOT-23), 5 pins 7
Junction-to-board characterization parameter ψJB 91 °C/W DBV (SOT-23), 5 pins 7

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TLV9030DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv9030dbvr-etched.step / tlv9030dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv9030dbvr.step / tlv9030dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (85 pp, sha256 874c1d4f5ec1c1b4, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF