component
TLV9001IDBVR-HXY
Public Made by Adomby adom
HXY MOSFET Operational Amplifier, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV9001IDBVR-HXY
HXY MOSFET · Operational Amplifier · SOT-23-5L
TLV9001IDBVR-HXY from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Positive (noninverting) input; the common-mode voltage range is VS- - 0.1 V to VS+ + 0.1 V and signal input terminals are limited to (V-) - 0.5 V to (V+) + 0.5 V. |
| 2 | V- | power_in | Negative (lowest) supply rail; single-supply operation is 1.5 V to 5.5 V (dual ±0.75 V to ±2.75 V), and the absolute maximum supply voltage is 6 V. |
| 3 | -IN | input | Negative (inverting) input; the common-mode voltage range is VS- - 0.1 V to VS+ + 0.1 V and signal input terminals are limited to (V-) - 0.5 V to (V+) + 0.5 V. |
| 4 | OUT | output | Output with rail-to-rail swing (about 5 mV from the rail into 100 kΩ), short-circuit current of 45 mA source and 70 mA sink, and output terminals limited to ±200 mA when current-limited. |
| 5 | V+ | power_in | Positive (highest) supply rail; single-supply operation is 1.5 V to 5.5 V (dual ±0.75 V to ±2.75 V), and the absolute maximum supply voltage is 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -3 | 1 | 3 | mV | 4 | |
| Common-Mode Rejection Ratio | CMRR | 70 | 80 | dB | VCM=0.1V to 4V | 4 | |
| Open-Loop Voltage Gain | AV | 80 | 100 | dB | VOUT=0.1V to 4.9V, RL=100kΩ | 4 | |
| Power-Supply Rejection Ratio | PSRR | 80 | 90 | dB | VS=1.5V to 5.5V | 5 | |
| Operating Voltage Range | VS | 1.5 | 5.5 | V | 5 | ||
| Quiescent Current per Amplifier | IQ | 28 | 40 | uA | IO=0A | 5 | |
| Supply Voltage | 6 | V | 3 | ||||
| Signal Input Terminals Current | -10 | 10 | mA | 3 | |||
| Signal Output Terminals Current | -200 | 200 | mA | 3 | |||
| Operating Temperature Range | -55 | 125 | °C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Junction Temperature | -40 | 150 | °C | 3 | |||
| Electrostatic Discharge, Human-Body Model (HBM) | V(ESD) | -2000 | 2000 | V | 3 | ||
| Electrostatic Discharge, Charged-Device Model (CDM) | V(ESD) | -500 | 500 | V | 3 | ||
| Electrostatic Discharge, Machine Model | V(ESD) | 100 | V | 3 | |||
| Supply Voltage, single-supply | Vs | 1.5 | 5.5 | V | Single-supply | 3 | |
| Supply Voltage, dual-supply | Vs | 0.75 | 2.75 | V | Dual-supply, printed as ±0.75 to ±2.75 | 3 |
CAD (KiCad official)
- Symbol:
TLV9001IDBVR-HXY - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
tlv9001idbvr-hxy-etched.step/tlv9001idbvr-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv9001idbvr-hxy.step/tlv9001idbvr-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (11 pp, sha256
93d5d33e9d56d7ba, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).