component
TLV840CADL28DBVR
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV840CADL28DBVR
Texas Instruments · Supervisor And Reset ICs · SOT-23-5
TLV840CADL28DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low reset output that is driven low when VDD falls below the negative threshold VIT-, and stays low for the delay time tD after VDD rises above VIT+ = VIT- + VHYS. |
| 2 | VDD | power_in | Supply input that the supervisor monitors, specified from 0.7 V to 6 V in recommended operating conditions (absolute maximum 6.5 V). |
| 3 | GND | power_in | Ground reference pin for the device. |
| 4 | NC | unconnected | No connect for the TLV840C; the pin can be left floating, though the datasheet also gives a recommended connection to GND. |
| 5 | CT | passive | Capacitor time delay pin: connecting a capacitor to it sets a longer reset delay, and leaving it floating gives the smallest fixed delay (about 40 µs typical); recommended connection to GND when not in use. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TLV840CADL28DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tlv840cadl28dbvr-etched.step/tlv840cadl28dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv840cadl28dbvr.step/tlv840cadl28dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
a8df9af31101d134, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).