component
TLV803RDBZR
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, SOT-23-3. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV803RDBZR
Texas Instruments · Supervisor And Reset ICs · SOT-23-3
TLV803RDBZR from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin. |
| 2 | RESET | tri_state | Open-drain RESET output asserted low for approximately 200 ms delay after VDD exceeds negative-going threshold VIT-; requires 10-kΩ to 1-MΩ pullup resistor with pullup voltage not limited by VDD. |
| 3 | VDD | power_in | Supply voltage input pin (1.1 V to 6 V operating range); place 0.1-µF ceramic bypass capacitor close to pin for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
CAD (KiCad official)
- Symbol:
TLV803RDBZR - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
tlv803rdbzr-etched.step/tlv803rdbzr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv803rdbzr.step/tlv803rdbzr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
5f594a771a4827a8, retrieved 2026-09-21, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).