TLV76728DRVR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tlv76728drvr",
  "title": "TLV76728DRVR",
  "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "tlv76728drvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TLV76728DRVR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-6-EP(2x2)",
    "pin_count": 7,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tlv767",
    "parts": {
      "symbol": "tlv76728drvr.kicad_sym",
      "footprint": "tlv76728drvr.kicad_mod",
      "model_3d": "tlv76728drvr-hero.glb",
      "model_3d_plain": "tlv76728drvr.glb",
      "model_3d_step": "tlv76728drvr-etched.step",
      "model_3d_step_plain": "tlv76728drvr.step",
      "lbr": "tlv76728drvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2865665",
      "digikey": "296-TLV76728DRVRTR-ND",
      "mouser": "595-TLV76728DRVR"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T20:12:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TLV76728DRVRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TLV76728DRVR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Output pin. Use the recommended capacitor value as listed in the Recommended Operating Conditions table. Place the output capacitor as close to the OUT and GND pins of the device as possible."
      },
      {
        "number": "2",
        "name": "SNS",
        "type": "input",
        "description": "Output sense pin. Connect the SNS pin to the OUT pin, or to remotely sense the output voltage at the load, connect the SNS pin to the load. Do not float this pin. For fixed-voltage version devices only."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin. All ground pins must be grounded."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable pin. Driving the enable pin high enables the device. Driving this pin low disables the device. High and low thresholds are listed in the Electrical Characteristics table. This pin has an internal pullup and can be left floating to enable the device or the pin can be connected to the input pin."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin. All ground pins must be grounded."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Input pin. Use the recommended capacitor value as listed in the Recommended Operating Conditions table. Place the input capacitor as close to the IN and GND pins of the device as possible."
      },
      {
        "number": "7",
        "name": "Thermal pad",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 7 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 11,
        "cost_usd": 0.1245,
        "at": "2026-10-05T20:12:45"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tlv767",
        "pages": 45,
        "sha256": "c631d45696a7ef20",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WSON-6-EP(2x2)",
      "Category": "Power Management (PMIC)",
      "Pins": "7"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tlv76728drvr"
  ],
  "discovery_pitch": "TLV76728DRVR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlv76728drvr.kicad_sym",
    "tlv76728drvr.kicad_mod",
    "tlv76728drvr.glb",
    "tlv76728drvr.step",
    "tlv76728drvr.lbr",
    "docs/hero.png",
    "docs/tlv76728drvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tlv76728drvr-hero.glb",
    "tlv76728drvr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}