TLV76701DGNR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tlv76701dgnr",
  "title": "TLV76701DGNR",
  "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HVSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "tlv76701dgnr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TLV76701DGNR",
    "manufacturer": "Texas Instruments",
    "package": "HVSSOP-8",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tlv767",
    "parts": {
      "symbol": "tlv76701dgnr.kicad_sym",
      "footprint": "tlv76701dgnr.kicad_mod",
      "model_3d": "tlv76701dgnr-etched.glb",
      "model_3d_plain": "tlv76701dgnr.glb",
      "model_3d_step": "tlv76701dgnr-etched.step",
      "model_3d_step_plain": "tlv76701dgnr.step",
      "lbr": "tlv76701dgnr.lbr"
    },
    "distributor_links": {
      "lcsc": "C3752401",
      "digikey": "296-TLV76701DGNRTR-ND",
      "mouser": "595-TLV76701DGNR"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T18:06:22Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TLV76701DGNRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TLV76701DGNR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "output",
        "description": "Output pin. Use the recommended capacitor value as listed in the Recommended Operating Conditions table. Place the output capacitor as close to the OUT and GND pins of the device as possible."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin. Input to the control-loop error amplifier. This pin is used to set the output voltage of the device with the use of external resistors. Do not float this pin. For adjustable-voltage version devices only."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "Do not connect to a biased voltage. Tie this pin to ground or leave floating."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin. All ground pins must be grounded."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Enable pin. Driving the enable pin high enables the device. Driving this pin low disables the device. High and low thresholds are listed in the Electrical Characteristics table. This pin has an internal pullup and can be left floating to enable the device or the pin can be connected to the input pin."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin. All ground pins must be grounded."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "Do not connect to a biased voltage. Tie this pin to ground or leave floating."
      },
      {
        "number": "8",
        "name": "IN",
        "type": "input",
        "description": "Input pin. Use the recommended capacitor value as listed in the Recommended Operating Conditions table. Place the input capacitor as close to the IN and GND pins of the device as possible."
      },
      {
        "number": "9",
        "name": "Thermal pad",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 45,
        "cost_usd": 0.3118,
        "at": "2026-10-01T18:06:02"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tlv767",
        "pages": 45,
        "sha256": "c631d45696a7ef20",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HVSSOP-8",
      "Category": "Power Management (PMIC)",
      "Pins": "9"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tlv76701dgnr"
  ],
  "discovery_pitch": "TLV76701DGNR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlv76701dgnr.kicad_sym",
    "tlv76701dgnr.kicad_mod",
    "tlv76701dgnr.glb",
    "tlv76701dgnr.step",
    "tlv76701dgnr.lbr",
    "docs/hero.png",
    "docs/tlv76701dgnr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}