# TLV75801PDBVT

**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TLV75801PDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input pin; use the recommended value or a larger ceramic capacitor from IN to ground as listed in the Recommended Operating Conditions, with the input supply range being 1.5 V to 6.0 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable pin: drive EN greater than VEN(HI) to turn the regulator on, and drive EN less than VEN(LO) to put the LDO into shutdown mode. |
| 4 | FB | input | Input to the control-loop error amplifier that sets the LDO output voltage (adjustable 0.55 V to 5.5 V). |
| 5 | OUT | power_out | Regulated output voltage pin; a ceramic capacitor from OUT to ground is required for stability, using the nominal recommended value or larger. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |

## CAD (KiCad official)

- Symbol: `TLV75801PDBVT`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `tlv75801pdbvt-etched.step` / `tlv75801pdbvt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv75801pdbvt.step` / `tlv75801pdbvt.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlv758p) (37 pp, sha256 `269eaca62d2d6eb7`, retrieved 2026-10-08, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/tlv75801pdbvt-datasheet.pdf)