component
TLV75801PDBVR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Regulator supply input pin (1.5 V to 6.0 V). Place a \u22651-\u00b5F ceramic input capacitor from IN to GND as close to the device as possible for best transient response and low input impedance."+ "description": "Regulator supply input pin (1.5 V to 6.0 V). Place a ≥1-µF ceramic input capacitor from IN to GND as close to the device as possible for best transient response and low input impedance." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable pin. Drive EN greater than VEN(HI) (min 1.0 V) to turn the regulator on; drive EN below VEN(LO) (max 0.3 V) to place the LDO in shutdown. Absolute-max 6.5 V. Internal pull-down resistance \u224895 \u03a9 at VIN = 6 V."+ "description": "Enable pin. Drive EN greater than VEN(HI) (min 1.0 V) to turn the regulator on; drive EN below VEN(LO) (max 0.3 V) to place the LDO in shutdown. Absolute-max 6.5 V. Internal pull-down resistance ≈95 Ω at VIN = 6 V." }, { "number": "4", "name": "FB", "type": "input",- "description": "Feedback input to the internal error amplifier. Connect an external resistor divider from OUT to FB to GND to set the output voltage; VFB = 0.55 V typical. Feedback pin current \u22480.01 \u00b5A (max 0.1 \u00b5A)."+ "description": "Feedback input to the internal error amplifier. Connect an external resistor divider from OUT to FB to GND to set the output voltage; VFB = 0.55 V typical. Feedback pin current ≈0.01 µA (max 0.1 µA)." }, { "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulated output pin (0.55 V to 5.5 V, up to 500 mA). Requires an output capacitor (\u22651 \u00b5F nominal, 0.47 \u00b5F minimum derated) from OUT to GND for stability; place close to the device."+ "description": "Regulated output pin (0.55 V to 5.5 V, up to 500 mA). Requires an output capacitor (≥1 µF nominal, 0.47 µF minimum derated) from OUT to GND for stability; place close to the device." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/tlv75801pdbvr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }