component
TLV75801PDBVR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+14@@ -36,6 +36,20 @@ TLV75801PDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions - Footprint: `Package_TO_SOT_SMD:SOT-23-5` - 3D model: SOT-23-5 (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`tlv75801pdbvr.step`](tlv75801pdbvr.step) | 85 KB | You want the bare part, or you mark your own boards. |+| [`tlv75801pdbvr-etched.step`](tlv75801pdbvr-etched.step) | 2.1 MB | You want the part with `TLV75801PDBVR` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 525 faces against 102 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "tlv75801pdbvr",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+9−9@@ -4,7 +4,7 @@ "slug": "tlv75801pdbvr", "title": "TLV75801PDBVR", "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -35,7 +35,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Regulator supply input pin (1.5 V to 6.0 V). Place a \u22651-\u00b5F ceramic input capacitor from IN to GND as close to the device as possible for best transient response and low input impedance."+ "description": "Regulator supply input pin (1.5 V to 6.0 V). Place a ≥1-µF ceramic input capacitor from IN to GND as close to the device as possible for best transient response and low input impedance." }, { "number": "2",@@ -47,19 +47,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable pin. Drive EN greater than VEN(HI) (min 1.0 V) to turn the regulator on; drive EN below VEN(LO) (max 0.3 V) to place the LDO in shutdown. Absolute-max 6.5 V. Internal pull-down resistance \u224895 \u03a9 at VIN = 6 V."+ "description": "Enable pin. Drive EN greater than VEN(HI) (min 1.0 V) to turn the regulator on; drive EN below VEN(LO) (max 0.3 V) to place the LDO in shutdown. Absolute-max 6.5 V. Internal pull-down resistance ≈95 Ω at VIN = 6 V." }, { "number": "4", "name": "FB", "type": "input",- "description": "Feedback input to the internal error amplifier. Connect an external resistor divider from OUT to FB to GND to set the output voltage; VFB = 0.55 V typical. Feedback pin current \u22480.01 \u00b5A (max 0.1 \u00b5A)."+ "description": "Feedback input to the internal error amplifier. Connect an external resistor divider from OUT to FB to GND to set the output voltage; VFB = 0.55 V typical. Feedback pin current ≈0.01 µA (max 0.1 µA)." }, { "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulated output pin (0.55 V to 5.5 V, up to 500 mA). Requires an output capacitor (\u22651 \u00b5F nominal, 0.47 \u00b5F minimum derated) from OUT to GND for stability; place close to the device."+ "description": "Regulated output pin (0.55 V to 5.5 V, up to 500 mA). Requires an output capacitor (≥1 µF nominal, 0.47 µF minimum derated) from OUT to GND for stability; place close to the device." } ], "provenance": {@@ -133,9 +133,9 @@ "docs/hero.png", "docs/tlv75801pdbvr-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D." }