component
TLV75533PDBVR-HXY
Public Made by Adomby adom
HXY MOSFET Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV75533PDBVR-HXY
HXY MOSFET · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
TLV75533PDBVR-HXY from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the datasheet gives a supply voltage absolute maximum of -0.3 to +8 V and an input voltage of 6 V in the DC characteristics table. |
| 2 | GND | power_in | Ground reference pin; the output capacitor should be placed as close as possible to the VOUT and GND pins, and the input capacitor (10uF) connected between VIN and GND. |
| 3 | CE | input | Chip enable input; when low, a built-in pull-down resistor pulls the output voltage low, shutting the regulator off, and the datasheet advises driving it from VIN or VSS rather than a floating level. |
| 4 | NC | unconnected | No internal connection; the datasheet lists this pin as No Connection. |
| 5 | VOUT | power_out | Regulated output pin; output is selectable in 100mV steps from 1.2 V to 5.0 V with a stated output current of 500 mA typical and an output capacitor of at least 10uF recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (tolerance) | -2 | 2 | % | 1 | |||
| Load Regulation | △Vout | 10 | 30 | mV | Vin= 4.3V, 1.0mA≤Iout≤100mA | 3 | |
| Line Regulation | △Vout1/(△Vin·Vout) | 0.05 | 0.2 | %/V | 4.3V≤Vin≤8V, Iout=10mA | 3 | |
| Output voltage Temperature Coefficient | △Vout/(Ta·Vout) | -100 | 100 | Ppm/℃ | Iout=30mA, 0℃≤Ta≤70℃ | 3 | |
| Supply Current | Iss | 5 | 30 | uA | 3 | ||
| Input Voltage | Vin | 6 | V | 3 | |||
| Supply Voltage | VIN | -0.3 | 8 | V | 2 | ||
| Storage Temperature Range | STG | -50 | 125 | °C | 2 | ||
| Operating Free-air Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Power dissipation (SOT-23-5L) | PW | 0.25 | 2 | ||||
| Output Current | Iout | 500 | mA | Vin-Vout=1V | 3 | ||
| PSRR | PSRR | 60 | dB | F=100Hz, Vin=4.3Vdc+1Vpp | 3 | ||
| Thermal resistance, junction to ambient (SOT-23-5L) | θJA | 500 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
TLV75533PDBVR-HXY - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
tlv75533pdbvr-hxy-etched.step/tlv75533pdbvr-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv75533pdbvr-hxy.step/tlv75533pdbvr-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (6 pp, sha256
fd22cf94752ee788, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).