TLV751330500PDSQR

{
  "slug": "tlv751330500pdsqr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-10-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tlv751330500pdsqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlv751330500pdsqr.kicad_sym",
    "tlv751330500pdsqr.kicad_mod",
    "tlv751330500pdsqr.glb",
    "tlv751330500pdsqr.step",
    "tlv751330500pdsqr.lbr",
    "docs/hero.png",
    "docs/tlv751330500pdsqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tlv751330500pdsqr-hero.glb",
    "tlv751330500pdsqr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TLV751330500PDSQR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-10-EP(2x2)",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tlv751",
    "parts": {
      "symbol": "tlv751330500pdsqr.kicad_sym",
      "footprint": "tlv751330500pdsqr.kicad_mod",
      "model_3d": "tlv751330500pdsqr-hero.glb",
      "model_3d_plain": "tlv751330500pdsqr.glb",
      "model_3d_step": "tlv751330500pdsqr-etched.step",
      "model_3d_step_plain": "tlv751330500pdsqr.step",
      "lbr": "tlv751330500pdsqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2876338",
      "digikey": "296-TLV751330500PDSQRTR-ND",
      "mouser": "595-LV751330500PDSQR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T18:53:53Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TLV751330500PDSQRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-LV751330500PDSQR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FB1/NC",
        "type": "unconnected",
        "description": "For the fixed TLV751xxxyyy device, this pin is not connected internally; on the adjustable TLV75101 it is the control-loop error amplifier input that sets the output voltage."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "3",
        "name": "EN1",
        "type": "input",
        "description": "Enable pin: drive above VEN1(HI) to turn the regulator on, and drive below VEN1(LO) to put the LDO into shutdown mode."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "5",
        "name": "EN2",
        "type": "input",
        "description": "Enable pin: drive above VEN2(HI) to turn the regulator on, and drive below VEN2(LO) to put the LDO into shutdown mode."
      },
      {
        "number": "6",
        "name": "IN2",
        "type": "power_in",
        "description": "Input pin for channel 2; the datasheet recommends a ceramic capacitor from IN to ground at the recommended value or larger, placed as close to the device as possible."
      },
      {
        "number": "7",
        "name": "FB2/NC",
        "type": "unconnected",
        "description": "For the fixed TLV751xxxyyy device, this pin is not connected internally; on the adjustable TLV75101 it is the control-loop error amplifier input that sets the output voltage."
      },
      {
        "number": "8",
        "name": "OUT2",
        "type": "power_out",
        "description": "Regulated output voltage pin for channel 2; a capacitor is required from OUT to ground for stability."
      },
      {
        "number": "9",
        "name": "IN1",
        "type": "power_in",
        "description": "Input pin for channel 1; the datasheet recommends a ceramic capacitor from IN to ground at the recommended value or larger, placed as close to the device as possible."
      },
      {
        "number": "10",
        "name": "OUT1",
        "type": "power_out",
        "description": "Regulated output voltage pin for channel 1; a capacitor is required from OUT to ground for stability."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The thermal pad is an exposed pad on the WSON package with no printed pin number in the datasheet pi; FB1 and FB2 are listed as NC for the fixed-output TLV751xxxyyy family, which matches this fixed-volt; Pin types for IN and OUT are mapped to KiCad power_in and power_out because the datasheet labels the",
          "exposed pad 11 added from the footprint"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0645,
        "at": "2026-10-08T18:53:13"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tlv751",
        "pages": 32,
        "sha256": "c4d29cf923e325fc",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlv751330500pdsqr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.975,
          0.8
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f2001b3f9a6ae3d0c8b7e19aea57daac7f0bb7d40364983cd7bb958958273a6d",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlv751330500pdsqr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.975,
          0.8
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5b48d3d5eaf14c1d967d0958f27022fb973971f855edf9c51b564e6617f4d6b2",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}