← Commit history

Initial commit: component/tlv75101pdsqr

Ray ·836d5ab3dc ·
2 files changed +224
README.mdadded+48
@@ -0,0 +1,48 @@+# TLV75101PDSQR++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-10-EP(2x2)++TLV75101PDSQR from Texas Instruments, in a WSON-10-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | FB1 | input | Feedback input to control loop error amplifier for setting output voltage on adjustable version. |+| 2 | GND | power_in | Ground pin. |+| 3 | EN1 | input | Enable input; drive above VEN(HI) to enable regulator or below VEN(LO) to enter shutdown mode. |+| 4 | GND | power_in | Ground pin. |+| 5 | EN2 | input | Enable input; drive above VEN(HI) to enable regulator or below VEN(LO) to enter shutdown mode. |+| 6 | IN2 | power_in | Input supply pin; use ceramic capacitor from IN to ground for best transient response and minimized input impedance. |+| 7 | FB2 | input | Feedback input to control loop error amplifier for setting output voltage on adjustable version. |+| 8 | OUT2 | power_out | Regulated output voltage pin; capacitor required from OUT to ground for stability. |+| 9 | IN1 | power_in | Input supply pin; use ceramic capacitor from IN to ground for best transient response and minimized input impedance. |+| 10 | OUT1 | power_out | Regulated output voltage pin; capacitor required from OUT to ground for stability. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-10-EP(2x2) |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `TLV75101PDSQR`+- Footprint: `Package_DFN_QFN:Texas_DSQ0010A_WSON-10-1EP_2x2mm_P0.4mm_EP0.9x1.5mm`+- 3D model: WSON-10-EP(2x2) (KiCad packages3D, STEP)+- 3D model files: `tlv75101pdsqr-etched.step` / `tlv75101pdsqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv75101pdsqr.step` / `tlv75101pdsqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlv751) (32 pp, sha256 `c4d29cf923e325fc`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlv75101pdsqr-datasheet.pdf)
page.jsonadded+176
@@ -0,0 +1,176 @@+{+  "slug": "tlv75101pdsqr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-10-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tlv75101pdsqr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tlv75101pdsqr.kicad_sym",+    "tlv75101pdsqr.kicad_mod",+    "tlv75101pdsqr.glb",+    "tlv75101pdsqr.step",+    "tlv75101pdsqr.lbr",+    "docs/hero.png",+    "docs/tlv75101pdsqr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TLV75101PDSQR",+    "manufacturer": "Texas Instruments",+    "package": "WSON-10-EP(2x2)",+    "pin_count": 11,+    "category": "Power Management (PMIC)",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tlv751",+    "parts": {+      "symbol": "tlv75101pdsqr.kicad_sym",+      "footprint": "tlv75101pdsqr.kicad_mod",+      "model_3d": "tlv75101pdsqr-etched.glb",+      "model_3d_plain": "tlv75101pdsqr.glb",+      "model_3d_step": "tlv75101pdsqr-etched.step",+      "model_3d_step_plain": "tlv75101pdsqr.step",+      "lbr": "tlv75101pdsqr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2861335",+      "digikey": "296-TLV75101PDSQRTR-ND",+      "mouser": "595-TLV75101PDSQR"+    },+    "distributor_check": {+      "checked_at": "2026-09-24T22:34:32Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-TLV75101PDSQRTR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-TLV75101PDSQR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "FB1",+        "type": "input",+        "description": "Feedback input to control loop error amplifier for setting output voltage on adjustable version."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin."+      },+      {+        "number": "3",+        "name": "EN1",+        "type": "input",+        "description": "Enable input; drive above VEN(HI) to enable regulator or below VEN(LO) to enter shutdown mode."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin."+      },+      {+        "number": "5",+        "name": "EN2",+        "type": "input",+        "description": "Enable input; drive above VEN(HI) to enable regulator or below VEN(LO) to enter shutdown mode."+      },+      {+        "number": "6",+        "name": "IN2",+        "type": "power_in",+        "description": "Input supply pin; use ceramic capacitor from IN to ground for best transient response and minimized input impedance."+      },+      {+        "number": "7",+        "name": "FB2",+        "type": "input",+        "description": "Feedback input to control loop error amplifier for setting output voltage on adjustable version."+      },+      {+        "number": "8",+        "name": "OUT2",+        "type": "power_out",+        "description": "Regulated output voltage pin; capacitor required from OUT to ground for stability."+      },+      {+        "number": "9",+        "name": "IN1",+        "type": "power_in",+        "description": "Input supply pin; use ceramic capacitor from IN to ground for best transient response and minimized input impedance."+      },+      {+        "number": "10",+        "name": "OUT1",+        "type": "power_out",+        "description": "Regulated output voltage pin; capacitor required from OUT to ground for stability."+      },+      {+        "number": "11",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 11 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 32,+        "cost_usd": 0.3227,+        "at": "2026-09-24T22:34:11"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tlv751",+        "pages": 32,+        "sha256": "c4d29cf923e325fc",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file