# TLV7211IDBVR

**Texas Instruments** · Comparators · SOT-23-5

TLV7211IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Push-pull CMOS comparator output that drives capacitive loads directly without a pull-up resistor, is held low during power-on reset, and has an output voltage range of VCC- - 0.3 V to VCC+ + 0.3 V. |
| 2 | VCC+ | power_in | Positive supply, recommended 2.7 V to 15 V total supply (VCC+ - VCC-), absolute maximum 16 V. |
| 3 | IN+ | input | Non-inverting input with rail-to-rail common-mode range exceeding VCC- and VCC+, and absolute maximum input voltage of VCC- - 0.3 V to VCC+ + 0.3 V. |
| 4 | IN- | input | Inverting input with rail-to-rail common-mode range exceeding VCC- and VCC+, and absolute maximum input voltage of VCC- - 0.3 V to VCC+ + 0.3 V. |
| 5 | VCC- | power_in | Negative supply or ground (GND) for single-supply operation, with the supply span (VCC+ - VCC-) limited to 2.7 V to 15 V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |

## CAD (KiCad official)

- Symbol: `TLV7211IDBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `tlv7211idbvr-etched.step` / `tlv7211idbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv7211idbvr.step` / `tlv7211idbvr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlv7211) (27 pp, sha256 `dde85838680f2f03`, retrieved 2026-10-03, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/tlv7211idbvr-datasheet.pdf)