component
TLV7034PWR
Public Made by Adomby adom
Texas Instruments Comparators, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV7034PWR
Texas Instruments · Comparators · TSSOP-14
TLV7034PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A comparator output; for the TLV703x push-pull stage the output is limited to VEE - 0.3 V to VCC + 0.3 V (or 7 V, whichever is less) per the absolute maximum ratings. |
| 2 | -IN A | input | Inverting input for channel A; the input must stay between VEE - 0.3 V and 7 V, and any input swinging 0.3 V below VEE must be current-limited to 10 mA or less. |
| 3 | +IN A | input | Noninverting input for channel A; the input common-mode range extends from VEE to 100 mV above VCC. |
| 4 | VCC | power_in | Positive (highest) supply; operating supply voltage VS = VCC - VEE is 1.6 V to 6.5 V. |
| 5 | +IN B | input | Noninverting input for channel B; the input common-mode range extends from VEE to 100 mV above VCC. |
| 6 | -IN B | input | Inverting input for channel B; the input must stay between VEE - 0.3 V and 7 V, and any input swinging 0.3 V below VEE must be current-limited to 10 mA or less. |
| 7 | OUT B | output | Channel B comparator output; for the TLV703x push-pull stage the output is limited to VEE - 0.3 V to VCC + 0.3 V (or 7 V, whichever is less) per the absolute maximum ratings. |
| 8 | OUT C | output | Channel C comparator output; for the TLV703x push-pull stage the output is limited to VEE - 0.3 V to VCC + 0.3 V (or 7 V, whichever is less) per the absolute maximum ratings. |
| 9 | -IN C | input | Inverting input for channel C; the input must stay between VEE - 0.3 V and 7 V, and any input swinging 0.3 V below VEE must be current-limited to 10 mA or less. |
| 10 | +IN C | input | Noninverting input for channel C; the input common-mode range extends from VEE to 100 mV above VCC. |
| 11 | VEE | power_in | Negative (lowest) supply or ground for single-supply operation; the thermal pad (if any) must connect to V- on the other packages, but the TSSOP pinout lists VEE only at pin 11. |
| 12 | +IN D | input | Noninverting input for channel D; the input common-mode range extends from VEE to 100 mV above VCC. |
| 13 | -IN D | input | Inverting input for channel D; the input must stay between VEE - 0.3 V and 7 V, and any input swinging 0.3 V below VEE must be current-limited to 10 mA or less. |
| 14 | OUT D | output | Channel D comparator output; for the TLV703x push-pull stage the output is limited to VEE - 0.3 V to VCC + 0.3 V (or 7 V, whichever is less) per the absolute maximum ratings. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Operational Amplifier/Comparator |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VIO | -8 | 0.1 | 8 | mV | VS = 1.8V and 5V, VCM = VS / 2 | 10 |
| Hysteresis | VHYS | 3 | 10 | 25 | mV | VS = 1.8V and 5V, VCM = VS / 2 | 10 |
| Output voltage high (TLV7034 only) | VOH | 4.65 | 4.8 | V | VS = 5V, VEE = 0V, IO = 3mA | 10 | |
| Output voltage low | VOL | 250 | 350 | mV | VS = 5V, VEE = 0V, IO = 3mA | 10 | |
| Supply current / Channel | ICC | 315 | 750 | nA | VS = 1.8V, no load, VID = -0.1V (Output Low) | 10 | |
| Supply voltage VS = VCC - VEE | VS | -0.3 | 7 | V | 6 | ||
| Input pins (IN+, IN-) | 7 | V | 6 | ||||
| Current into Input pins (IN+, IN-) | -10 | 10 | mA | 6 | |||
| Output short-circuit duration | 10 | s | Short-circuit to ground, one comparator per package | 6 | |||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Supply voltage VS = VCC, VEE | VS | 1.6 | 6.5 | V | 6 | ||
| Ambient temperature | TA | -40 | 125 | °C | 6 | ||
| Input bias current | IB | 2 | pA | 10 | |||
| Input offset current | IOS | 1 | pA | 10 | |||
| Common-mode rejection ratio | CMRR | 73 | dB | VEE < VCM < VCC, VS = 5V | 10 | ||
| Power supply rejection ratio | PSRR | 77 | dB | VS = 1.8V to 5V, VCM = VS / 2 | 10 | ||
| Short-circuit current, sourcing (TLV7034 only) | ISC | 29 | mA | VS = 5V, sourcing (for TLV7034 only) | 10 | ||
| Short-circuit current, sinking | ISC | 33 | mA | VS = 5V, sinking | 10 | ||
| Rise time (TLV7034 only) | tR | 4.5 | ns | Measured from 20% to 80% | 10 | ||
| Fall time | tF | 4.5 | ns | Measured from 20% to 80% | 10 | ||
| Power-up time | tON | 400 | µs | During power on, VCC must exceed 1.6V for tON before the output reflects the input | 10 | ||
| Junction-to-ambient thermal resistance (PW TSSOP) | RθJA | 131 | °C/W | TLV7034/44 PW (TSSOP) 14 pins | 7 | ||
| Junction-to-case (top) thermal resistance (PW TSSOP) | RθJC(top) | 60.5 | °C/W | TLV7034/44 PW (TSSOP) 14 pins | 7 | ||
| Junction-to-board thermal resistance (PW TSSOP) | RθJB | 74.1 | °C/W | TLV7034/44 PW (TSSOP) 14 pins | 7 | ||
| Junction-to-top characterization parameter (PW TSSOP) | ΨJT | 12.6 | °C/W | TLV7034/44 PW (TSSOP) 14 pins | 7 | ||
| Junction-to-board characterization parameter (PW TSSOP) | ΨJB | 73.5 | °C/W | TLV7034/44 PW (TSSOP) 14 pins | 7 |
CAD (KiCad official)
- Symbol:
TLV7034PWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
tlv7034pwr-etched.step/tlv7034pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv7034pwr.step/tlv7034pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (69 pp, sha256
e60a578388f04044, retrieved 2026-10-24, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).