component
TLV7031DCKR
Public Made by Adomby adom
Texas Instruments Comparators, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV7031DCKR
Texas Instruments · Comparators · SC-70-5
TLV7031DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Push-pull output (TLV7031) with high output voltage 4.65V to 4.8V and low output voltage 250mV to 350mV at 3mA load (VS = 5V); maximum source current 29mA and maximum sink current 33mA. |
| 2 | VEE | power_in | Negative (lowest) supply voltage or ground reference; input signal pins internally diode-clamped to VEE with protection from voltages below VEE - 0.3V. |
| 3 | IN+ | input | Non-inverting (+) input; rail-to-rail common-mode input voltage range from VEE to VCC + 0.1V with input bias current 2pA typical. |
| 4 | IN- | input | Inverting (-) input; rail-to-rail common-mode input voltage range from VEE to VCC + 0.1V with input offset voltage ±8mV maximum. |
| 5 | VCC | power_in | Positive (highest) supply voltage; recommended operating range 1.6V to 6.5V; quiescent supply current 315nA typical at 1.8V supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TLV7031DCKR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tlv7031dckr-etched.step/tlv7031dckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv7031dckr.step/tlv7031dckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (69 pp, sha256
03c6901d3923c547, retrieved 2026-09-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).