3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV70310DBVR
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
TLV70310DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Input pin; a small 1-µF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Driving EN over 0.9 V turns on the regulator, and driving EN below 0.4 V puts it into shutdown mode, reducing operating current to 1 µA nominal. |
| 4 | NC | unconnected | No connection; this pin can be tied to ground to improve thermal dissipation. |
| 5 | OUT | output | Regulated output voltage pin; a small 1-µF ceramic capacitor is needed from this pin to ground to assure stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TLV70310DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tlv70310dbvr-etched.step/tlv70310dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv70310dbvr.step/tlv70310dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
86c5f4341863addb, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).