Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TLV7021DBVR

Texas Instruments · Comparators · SOT-23-5

TLV7021DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT tri_state Open-drain output with 260 ns typical propagation delay and 100 pA typical leakage current when high.
2 VEE power_in Negative (lowest) power supply or ground for single-supply operation; input diode clamps connect here.
3 IN+ input Noninverting input with rail-to-rail common-mode input range from VEE to VCC + 0.1 V and 5 pA typical input bias current.
4 IN- input Inverting input with rail-to-rail common-mode input range from VEE to VCC + 0.1 V and 5 pA typical input bias current.
5 VCC power_in Positive (highest) power supply with recommended operating voltage range of 1.6 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

CAD (KiCad official)

  • Symbol: TLV7021DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tlv7021dbvr-etched.step / tlv7021dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv7021dbvr.step / tlv7021dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (53 pp, sha256 fb9f4e9b0ebe121a, retrieved 2026-09-22, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF