component

TLV70218DBVR

Public Made by Adom

by adom

Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentpmictlv70218dbvr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tlv70218dbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json tlv70218dbvr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
README.md tlv70218dbvr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
tlv70218dbvr-etched.fit.json tlv70218dbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlv70218dbvr-etched.glb tlv70218dbvr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
tlv70218dbvr-etched.step tlv70218dbvr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
tlv70218dbvr.glb Publish 0.1.0 · Ray
tlv70218dbvr.kicad_mod Publish 0.1.0 · Ray
tlv70218dbvr.kicad_sym Publish 0.1.0 · Ray
tlv70218dbvr.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
tlv70218dbvr.step Publish 0.1.0 · Ray

TLV70218DBVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TLV70218DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply pin, 2 V to 5.5 V. A small 1-µF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance. Absolute maximum -0.3 V to 6 V.
2 GND power_in Ground reference pin. All device voltages are referenced to this network ground terminal.
3 EN input Enable pin. Driving EN over 0.9 V (V_EN(high)) turns on the regulator; driving EN below 0.4 V (V_EN(low)) puts the regulator into shutdown mode and reduces operating current to 1 µA nominal. For TLV702P, output voltage is discharged through an internal 120-Ω resistor when shut down. Absolute maximum -0.3 V to 6 V.
4 NC unconnected No connection. This pin can be tied to ground to improve thermal dissipation.
5 OUT power_out Regulated output voltage pin (1.8 V nominal for TLV70218, ±2% accuracy). Rated for 0-300 mA output; internally current-limited (500 mA typ). A small 1-µF ceramic capacitor is needed from this pin to ground to assure stability. Absolute maximum -0.3 V to 6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • TLV70218DBVR
  • TLV70218DBVRDBVT
  • TLV70218DBVRDSER
  • TLV70218DBVRDSET

CAD (KiCad official)

  • Symbol: TLV70218DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tlv70218dbvr-etched.step / tlv70218dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv70218dbvr.step / tlv70218dbvr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tlv70218dbvr.step 85 KB You want the bare part, or you mark your own boards.
tlv70218dbvr-etched.step 1.9 MB You want the part with TLV70218DBVR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 488 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 8f1db0a17b7a6482, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF