main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlv70212dbvt: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tlv70212dbvt-etched.glb Publish 0.1.0 · Ray
tlv70212dbvt-etched.step tlv70212dbvt: factory component page (tier=mfr) · Ray
tlv70212dbvt-hero.glb tlv70212dbvt: hero GLB from the etched model (keeps the MPN mark) · Ray
tlv70212dbvt-hero.overlay.json Publish 0.1.0 · Ray
tlv70212dbvt.glb Publish 0.1.0 · Ray
tlv70212dbvt.kicad_mod Publish 0.1.0 · Ray
tlv70212dbvt.kicad_sym Publish 0.1.0 · Ray
tlv70212dbvt.lbr Publish 0.1.0 · Ray
tlv70212dbvt.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

TLV70212DBVT

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TLV70212DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Input pin; a small 1-µF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance.
2 GND power_in Ground pin.
3 EN input Enable pin; driving EN over 0.9 V turns on the regulator, and driving EN below 0.4 V puts it into shutdown with operating current reduced to 1 µA nominal.
4 NC unconnected No connection; this pin can be tied to ground to improve thermal dissipation.
5 OUT output Regulated output voltage pin; a 1-µF ceramic capacitor is needed from this pin to ground to assure stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 2 5.5 V 5
DC output accuracy VOUT -2 0.5 2 % -40°C ≤ TJ ≤ 125°C 5
Line regulation ΔVOUT(ΔVIN) 1 5 mV VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, IOUT = 10 mA 5
Load regulation ΔVOUT(ΔIOUT) 1 15 mV 0 mA ≤ IOUT ≤ 300 mA 5
Output current limit ICL 320 500 860 mA VOUT = 0.9 × VOUT(nom) 5
Ground pin current IGND 35 55 μA IOUT = 0 mA 5
Ground pin current (shutdown) ISHDN 1 2 μA VEN ≤ 0.4 V, 2 V ≤ VIN ≤ 4.5 V, TJ = -40°C to +85°C 5
Enable pin low (disabled) VEN(low) 0 0.4 V 5
Operating junction temperature TJ -40 125 °C 5
Input voltage (absolute maximum) IN -0.3 6 V 4
Enable voltage (absolute maximum) EN -0.3 6 V 4
Output voltage (absolute maximum) OUT -0.3 6 V VIN + 0.3 V or 6.0 V, whichever is smaller (footnote 3) 4
Operating virtual junction temperature (absolute maximum) TJ -55 150 °C 4
Storage temperature Tstg -55 150 °C 4
Input voltage VIN 2 5.5 V 4
Output voltage VOUT 1.2 4.8 V 4
Output current IOUT 0 300 mA 4
Junction-to-ambient thermal resistance (DBV, 5 pins) RθJA 249.2 °C/W 4
Junction-to-case (top) thermal resistance (DBV, 5 pins) RθJC(top) 136.4 °C/W 4
Junction-to-board thermal resistance (DBV, 5 pins) RθJB 85.9 °C/W 4
Junction-to-top characterization parameter (DBV, 5 pins) ψJT 19.5 °C/W 4
Junction-to-board characterization parameter (DBV, 5 pins) ψJB 85.3 °C/W 4

CAD (KiCad official)

  • Symbol: TLV70212DBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv70212dbvt-etched.step / tlv70212dbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv70212dbvt.step / tlv70212dbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 21ccbf303c433f19, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF