Generated by kicad-footprint-generator · KiCad file format 20260206
TLV70212DBVR-HXY
HXY MOSFET · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
TLV70212DBVR-HXY from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin; the datasheet gives a maximum input voltage of 6.5 V (DC characteristics) and an absolute maximum supply voltage of -0.3 to +8 V, and recommends a 10 uF input capacitor between VIN and VSS. |
| 2 | GND | power_in | Ground (VSS) reference pin; the output capacitor and input capacitor should be connected as close as possible to this pin and VOUT/VIN. |
| 3 | CE | input | ON/OFF control input with CMOS hysteresis; logic high requires at least 1.5 V and logic low is 0.4 V maximum at VIN = 5.0 V, and a low level shuts the IC down and pulls VOUT to VSS through the internal pull-down; any series resistor on CE must be under 10 kOhm. |
| 4 | NC | unconnected | No connect pin, not internally connected to the circuit. |
| 5 | VOUT | power_out | Regulated output voltage pin (0.9 V to 5.0 V in 100 mV steps); it supplies up to 300 mA at VIN - VOUT = 1 V and requires an output capacitor of at least 10 uF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VIN | -0.3 | 8 | V | 2 | ||
| Storage temperature range | STG | -50 | 125 | °C | 2 | ||
| Operating temperature | TA | -40 | 85 | °C | 2 | ||
| Output voltage accuracy (Vout ≤ 2.5V row; printed as Vout -0.05 / Vout +0.05) | Vout | -0.05 | 0.05 | V | Vin=Vout+1V; 1.0mA≤Iout≤100mA | 3 | |
| Line regulation | △Vout1/(△Vin·Vout) | 0.05 | 0.2 | %/V | 4.3V≤Vin≤8V; Iout=10mA | 3 | |
| Load regulation | △Vout | 15 | 40 | mV | Vin= 4.3V; 1.0mA≤Iout≤100mA | 3 | |
| Output voltage temperature coefficient | △Vout/(Ta·Vout) | -100 | 100 | Ppm/℃ | Iout=30mA; 0℃≤Ta≤70℃ | 3 | |
| Supply current | Iss | 10 | 15 | uA | 3 | ||
| Input voltage | Vin | 6.5 | V | 3 | |||
| EN logic high voltage | VENH | 1.5 | V | VIN=5.0V | 3 | ||
| EN logic low voltage | VENL | 0.4 | V | VIN=5.0V | 3 | ||
| Thermal resistance, junction to ambient (SOT-23-5L) | θJA | 260 | °C/W | SOT-23-5L package | 2 | ||
| Power dissipation (SOT-23-5L) | PW | 0.4 | W | SOT-23-5L package | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TLV70212DBVR-HXY - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L, generated on the KiCad land (body 1.625 x 2.935 mm, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv70212dbvr-hxy-etched.step/tlv70212dbvr-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv70212dbvr-hxy.step/tlv70212dbvr-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (6 pp, sha256
186bf2571c20d067, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).