component
TLV70025DSER
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6(1.5x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV70025DSER
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6(1.5x1.5)
TLV70025DSER from Texas Instruments, in a WSON-6(1.5x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Input pin. A small, 1-μF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance. |
| 2 | GND | power_in | Ground pin. |
| 3 | OUT | output | Regulated output voltage pin. A small, 1-μF ceramic capacitor is needed from this pin to ground to assure stability. |
| 4 | NC | unconnected | No connection. This pin can be tied to ground to improve thermal dissipation. |
| 5 | NC | unconnected | No connection. This pin can be tied to ground to improve thermal dissipation. |
| 6 | EN | input | Enable pin. Driving EN over 0.9 V turns on the regulator. Driving EN below 0.4 V puts the regulator into shutdown mode and reduces operating current to 1 μA, nominal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6(1.5x1.5) |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TLV70025DSER - Footprint:
Package_SON:WSON-6_1.5x1.5mm_P0.5mm - 3D model: WSON-6(1.5x1.5) (KiCad packages3D, STEP)
- 3D model files:
tlv70025dser-etched.step/tlv70025dser-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv70025dser.step/tlv70025dser.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
fdb008365c01d2be, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).