Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TLV70025DDCT

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOT-23-5

TLV70025DDCT from Texas Instruments, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Input pin; 1 μF ceramic capacitor recommended to ground for stability and transient performance.
2 GND power_in Ground pin.
3 EN input Enable pin; driving above 0.9 V turns on regulator, driving below 0.4 V puts regulator in shutdown mode at 1 μA nominal current.
4 NC unconnected No connection; can be tied to ground to improve thermal dissipation.
5 OUT output Regulated output voltage pin; 1 μF ceramic capacitor required to ground for stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: TLV70025DDCT
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tlv70025ddct-etched.step / tlv70025ddct-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv70025ddct.step / tlv70025ddct.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 fdb008365c01d2be, retrieved 2026-10-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF