main
History Download
Ray tlv70025dckr: specified limits as data (metadata.characteristics, 35 rows from the datasheet) 731f5f7

TLV70025DCKR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5

TLV70025DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input pin; a small 1-μF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance.
2 GND power_in Ground pin.
3 EN input Enable pin; driving EN above 0.9 V turns on the regulator, below 0.4 V puts the regulator into shutdown mode and reduces operating current to 1 μA nominal.
4 NC unconnected No connection; this pin can be tied to ground to improve thermal dissipation.
5 OUT power_out Regulated output voltage pin; a small 1-μF ceramic capacitor is needed from this pin to ground to assure stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range (recommended) VIN 2 5.5 V 5
Output voltage (recommended) VOUT 1.2 4.8 V 5
Output current (recommended) IOUT 0 200 mA 5
Operating junction temperature TJ -40 125 °C 6
VIN absolute maximum VIN -0.3 6 V 5
VEN absolute maximum VEN -0.3 6 V see footnote: VIN + 0.3 V or 6 V, whichever is less 5
VOUT absolute maximum VOUT -0.3 6 V 5
Operating junction temperature (absolute maximum) TJ -55 150 °C 5
Storage temperature Tstg -55 150 °C 5
DC output accuracy VOUT -2 2 % –40°C ≤ TJ ≤ +125°C 6
Input voltage range VIN 2 5.5 V 6
Line regulation ΔVOUT(ΔVIN) 1 5 mV VOUT(nom) + 0.3 V ≤ VIN ≤ 5.5 V, IOUT = 10 mA 6
Load regulation ΔVOUT(ΔIOUT) 1 15 mV 0 mA ≤ IOUT ≤ 200 mA 6
Dropout voltage VDO 175 250 mV VIN = 0.98 × VOUT(nom), IOUT = 200 mA, VOUT = 2.35 V 6
Output current limit ICL 220 860 mA VOUT = 0.9 × VOUT(nom) 6
Ground pin current IGND 31 55 μA IOUT = 0 mA 6
Ground pin current (shutdown) ISHDN 1 2 μA VEN ≤ 0.4 V, 2 V ≤ VIN ≤ 4.5 V 6
Enable pin high (enabled) VEN(high) 0.9 V printed as 0.9 VIN 6
Enable pin low (disabled) VEN(low) 0 0.4 V 6
Enable pin current IEN 0.04 0.5 μA VIN = VEN = 5.5 V 6
Dropout voltage VDO 43 mV VIN = 0.98 × VOUT(nom), IOUT = 50 mA, VOUT = 2.8 V 6
Dropout voltage VDO 85 mV VIN = 0.98 × VOUT(nom), IOUT = 100 mA, VOUT = 2.8 V 6
Ground pin current IGND 270 μA IOUT = 200 mA, VIN = VOUT + 0.5 V 6
Ground pin current (shutdown) ISHDN 400 nA VEN ≤ 0.4 V, VIN = 2 V 6
Power-supply rejection ratio PSRR 68 dB VIN = 2.3 V, VOUT = 1.8 V, IOUT = 10 mA, f = 1 kHz 6
Output noise voltage Vn 48 μVRMS BW = 100 Hz to 100 kHz, VIN = 2.3 V, VOUT = 1.8 V, IOUT = 10 mA 6
Start-up time tSTR 100 μs COUT = 1 μF, IOUT = 200 mA; time from EN assertion to 0.98 × VOUT(nom) 6
Undervoltage lockout UVLO 1.9 V VIN rising 6
Thermal shutdown temperature Tsd 160 °C Shutdown, temperature increasing 6
Thermal shutdown temperature (reset) Tsd 140 °C Reset, temperature decreasing 6
Junction-to-ambient thermal resistance RθJA 307.6 °C/W DCK [SC70], 5 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 79.1 °C/W DCK [SC70], 5 pins 5
Junction-to-board thermal resistance RθJB 93.7 °C/W DCK [SC70], 5 pins 5
Junction-to-top characterization parameter ψJT 1.3 °C/W DCK [SC70], 5 pins 5
Junction-to-board characterization parameter ψJB 92.8 °C/W DCK [SC70], 5 pins 5

CAD (KiCad official)

  • Symbol: TLV70025DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: tlv70025dckr-etched.step / tlv70025dckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv70025dckr.step / tlv70025dckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 fdb008365c01d2be, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF