Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV70012DCKR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5

TLV70012DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Input supply pin requiring 1 μF ceramic capacitor to ground for stability and transient performance.
2 GND power_in Ground reference.
3 EN input Enable pin; regulator enabled at EN > 0.9 V, shutdown mode at EN < 0.4 V with 1 μA nominal current.
4 NC unconnected No connection pin; may be tied to ground to improve thermal dissipation.
5 OUT output Regulated output voltage pin requiring 1 μF ceramic capacitor to ground for stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage VIN (input) VIN -0.3 6 V Over operating junction temperature range (unless otherwise noted) 5
Voltage VEN (enable) VEN -0.3 6 V Footnote (2): VEN absolute maximum rating is VIN + 0.3 V or 6 V, whichever is less 5
Voltage VOUT (output) VOUT -0.3 6 V Over operating junction temperature range (unless otherwise noted) 5
Operating junction temperature TJ -55 150 °C Over operating junction temperature range (unless otherwise noted) 5
Storage temperature Tstg -55 150 °C 5
Input voltage (recommended) VIN 2 5.5 V Over operating free-air temperature range 5
Output voltage (recommended) VOUT 1.2 4.8 V Over operating free-air temperature range 5
Output current (recommended) IOUT 0 200 mA Over operating free-air temperature range 5
Input voltage range VIN 2 5.5 V 6
DC output accuracy VOUT -2 2 % –40°C ≤ TJ ≤ +125°C 6
Line regulation ΔVOUT(ΔVIN) 1 5 mV VOUT(nom) + 0.3 V ≤ VIN ≤ 5.5 V, IOUT = 10 mA 6
Load regulation ΔVOUT(ΔIOUT) 1 15 mV 0 mA ≤ IOUT ≤ 200 mA 6
Enable pin low (disabled) VEN(low) 0 0.4 V 6
Ground pin current IGND 31 55 μA IOUT = 0 mA 6
Ground pin current (shutdown) ISHDN 1 2 μA VEN ≤ 0.4 V, 2 V ≤ VIN ≤ 4.5 V 6
Enable pin current IEN 0.04 0.5 μA VIN = VEN = 5.5 V 6
Operating junction temperature (electrical table) TJ -40 125 °C 6
Junction-to-ambient thermal resistance (DCK, SC70-5) RθJA 307.6 °C/W 5
Junction-to-case (top) thermal resistance (DCK, SC70-5) RθJC(top) 79.1 °C/W 5
Junction-to-board thermal resistance (DCK, SC70-5) RθJB 93.7 °C/W 5
Junction-to-top characterization parameter (DCK, SC70-5) ψJT 1.3 °C/W 5
Junction-to-board characterization parameter (DCK, SC70-5) ψJB 92.8 °C/W 5

CAD (KiCad official)

  • Symbol: TLV70012DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: tlv70012dckr-etched.step / tlv70012dckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv70012dckr.step / tlv70012dckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 fdb008365c01d2be, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF