3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTLV6710DDCT
Texas Instruments · Comparators · SOT-23-6
TLV6710DDCT from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | INA comparator open-drain output, driven low when INA is below VIT-(INA) and goes high-impedance when the sense voltage rises above VIT+(INA); rated to 25 V. |
| 2 | GND | power_in | Ground. |
| 3 | INA | input | Comparator A input monitoring the voltage through an external resistor divider; OUTA is driven low when the voltage drops below VIT-(INA), with 7 V absolute maximum. |
| 4 | INB | input | Comparator B input monitoring the voltage through an external resistor divider; OUTB is driven low when the voltage exceeds VIT+(INB), with 7 V absolute maximum. |
| 5 | VDD | power_in | Supply voltage input, connect a 1.8-V to 36-V supply (40 V absolute maximum) with a 0.1-µF ceramic capacitor placed close to the pin. |
| 6 | OUTB | output | INB comparator open-drain output, driven low when INB exceeds VIT+(INB) and goes high-impedance when the sense voltage falls below VIT-(INB); rated to 25 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Operational Amplifier/Comparator |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VDD | 1.8 | 36 | V | 5 | ||
| Power-on reset voltage | V(POR) | 0.8 | V | VOL ≤ 0.2 V | 5 | ||
| INA negative input threshold voltage | VIT-(INA) | 397 | 400 | 403 | mV | VDD = 1.8 V to 36 V | 5 |
| INA positive input threshold voltage | VIT+(INA) | 400 | 405.5 | 413 | mV | VDD = 1.8 V to 36 V | 5 |
| INA hysteresis voltage | VHYS(INA) | 2 | 5.5 | 12 | mV | HYS = VIT+(INA), VIT-(INA) | 5 |
| INB negative input threshold voltage | VIT-(INB) | 387 | 394.5 | 400 | mV | VDD = 1.8 V to 36 V | 5 |
| INB positive input threshold voltage | VIT+(INB) | 397 | 400 | 403 | mV | VDD = 1.8 V to 36 V | 5 |
| INB hysteresis voltage | VHYS(INB) | 2 | 5.2 | 12 | mV | HYS = VIT+(INB), VIT-(INB) | 5 |
| Low-level output voltage | VOL | 130 | 250 | mV | VDD = 1.8 V, IOUT = 3 mA | 5 | |
| Low-level output voltage | VOL | 150 | 250 | mV | VDD = 5 V, IOUT = 5 mA | 5 | |
| Input current (INA, INB) | IIN | -25 | 1 | 25 | nA | VDD = 1.8 V and 36 V, VINA, VINB = 6.5 V | 5 |
| Input current (INA, INB) | IIN | -15 | 1 | 15 | nA | VDD = 1.8 V and 36 V, VINA, VINB = 0.1 V | 5 |
| Open-drain output leakage current | ID(leak) | 10 | 300 | nA | VDD = 1.8 V and 36 V, VOUT = 25 V | 5 | |
| Supply current | IDD | 8 | 11 | µA | VDD = 1.8 V, 36 V | 5 | |
| Undervoltage lockout | UVLO | 1.3 | 1.5 | 1.7 | V | VDD falling | 5 |
| Supply pin voltage | VDD | 1.8 | 36 | V | 4 | ||
| Input pin voltage | VINA, VINB | 0 | 1.7 | V | 4 | ||
| Output pin voltage | VOUTA, VOUTB | 0 | 25 | V | 4 | ||
| Output pin current | IOUTA, IOUTB | 0 | 10 | mA | 4 | ||
| Junction temperature | TJ | -40 | 25 | 125 | °C | 4 | |
| VDD voltage | VDD | -0.3 | 40 | V | 4 | ||
| Output voltage | VOUTA, VOUTB | -0.3 | 28 | V | 4 | ||
| Input voltage | VINA, VINB | -0.3 | 7 | V | 4 | ||
| Output pin current | 40 | mA | 4 | ||||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 201.6 | °C/W | DDC (SOT), 6 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 47.8 | °C/W | DDC (SOT), 6 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 51.2 | °C/W | DDC (SOT), 6 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 0.7 | °C/W | DDC (SOT), 6 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 50.8 | °C/W | DDC (SOT), 6 pins | 4 | ||
| High-to-low propagation delay | tpd(HL) | 9.9 | µs | VDD = 24 V, ±10-mV input overdrive, RL = 100 kΩ, VOH = 0.9 × VDD, VOL = 250 mV | 6 | ||
| Low-to-high propagation delay | tpd(LH) | 28.1 | µs | VDD = 24 V, ±10-mV input overdrive, RL = 100 kΩ, VOH = 0.9 × VDD, VOL = 250 mV | 6 | ||
| Startup delay | td(start) | 155 | µs | VDD = 5 V | 6 | ||
| Output rise time | tr | 2.7 | µs | VDD = 12 V, 10-mV input overdrive, RL = 100 kΩ, CL = 10 pF, VO = (0.1 to 0.9) × VDD | 6 | ||
| Output fall time | tf | 0.12 | µs | VDD = 12 V, 10-mV input overdrive, RL = 100 kΩ, CL = 10 pF, VO = (0.9 to 0.1) × VDD | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TLV6710DDCT - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 0.9 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv6710ddct-etched.step/tlv6710ddct-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv6710ddct.step/tlv6710ddct.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
351bc6c8a1a4b286, retrieved 2026-11-13, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).